Sikaflex-11 FC single component polyurethane sealant
Short Description:
With all cement substrates, bricks, glazed tiles, metals, wood, polyurethane, epoxy, and rapid curing Strong durability Good wear resistance and high tear strength Good weather resistance and waterproof performance No sagging within a vertical joint width of 30 mm Ready to use on-site without mixing
"Sincerity, Innovation, Rigorousness, and Efficiency" is the persistent conception of our company for the long-term to develop together with customers for mutual reciprocity and mutual benefit for Sikaflex-11 FC single component polyurethane sealant, We sincerely welcome all guests to set up business relationships with us on the basis of mutual benefits. Please contact us now. You will get our professional reply within 8 hours.
With all cement substrates, bricks, glazed tiles, metals, wood, polyurethane, epoxy, and rapid curing
Strong durability
Good wear resistance and high tear strength
Good weather resistance and waterproof performance
No sagging within a vertical joint width of 30 mm
Ready to use on-site without mixing
Used as an elastic adhesive for:
Composite metal frame building
Cover plate and corner treatment
Lightweight building materials
Sound-absorbing ceiling
Wood, metal, or plastic door and window frames
Platform baseboard and threshold
Used as an elastic sealant for:
Sealing of joints between concrete, epoxy, stone, and block stone floors
Sealing of roof and drainage ditch joints
Elastic ventilation seal
Reservoir, water tank, and shaft
Bolt lap joint
Sealing through holes in walls or floors, such as sanitary facilities such as sleeves and pipelines
Advantage:
With all cement substrates, bricks, glazed tiles, metals, wood, polyurethane, epoxy, and rapid curing
Strong durability
Good wear resistance and high tear strength
Good weather resistance and waterproof performance
No sagging within a vertical joint width of 30 mm
Ready to use on-site without mixing
Non corrosive
Can be coated with various water-based/solvent based/rubber based coatings (preliminary testing is recommended)
Verified to come into contact with drinking water
| Colour | Grey, white, black |
| Density | 1.15-1.2 kg/L related to color |
| Operate temperature | 5℃~40℃ |
| Operation temperature | -40 ℃~+80 ℃ (up to 50 ℃ in hot water) |
| Shore A hardness | 40~45 |
| Elastic recovery rate | >90% |
| Elongation at break | >450% |
| Tear strength | 7 Mpa |
| Breaking tensile strength | About 1.4 Mpa |
| Package | 600 ml/piece, 20 pieces/box |
