Online Exporter SV-8000 PU Sealant for Insulating Glass for Tunisia Manufacturers
Short Description:
Description SV – 8000 two-component polyurethane insulating glass sealant is a neutral cure, mainly used for the insulating glass of the second seal. Product formulation to use its performance with high modulus, high strength, to meet the requirements of insulating glass assembly. Where to use It is a two-component PU sealant that offers variable work life with high bonding strength to maintain the integrity of insulating glass unit, suits both commercial and residential IGU. Key Fe...
Bear "Customer first, Quality first" in mind, we work closely with our customers and provide them with efficient and professional services for Online Exporter SV-8000 PU Sealant for Insulating Glass for Tunisia Manufacturers, Standing still today and looking into the future, we sincerely welcome customers all over the world to cooperate with us.
Description
SV – 8000 two-component polyurethane insulating glass sealant is a neutral cure, mainly used for the insulating glass of the second seal. Product formulation to use its performance with high modulus, high strength, to meet the requirements of insulating glass assembly.
Where to use
It is a two-component PU sealant that offers variable work life with high bonding strength to maintain the integrity of insulating glass unit, suits both commercial and residential IGU.
Key Features
1. High Modulus
2. UV resistance
3. Low vapor and gas transmission
4. Primerless adhesion to coated glass
Technical data sheet
| Test project | standards | Value |
| Sagging degree (mm) | ≤3 | 0 |
| Operating time | ≥30 | 30 |
| Thermal weight loss(%) | ≤10 | 2 |
| Durometer Hardness Shore A | 20-80 | 42 |
| tensile propcrties（MPA） | ＞0.4 | 1.0 |
| Bond damage area（5%） | ≤5 | 0 |
Certification
GB-24266-2009;
Color
Component A(Base) – White, Component B(Catalyst)- Black
Package
1. Component A(Base): (190L), Component B(Catalyst) (18.5L)
2. Component A(Base):24.5kg (18L), Component B(Catalyst): 1.9kg (1.8L)
Shelf life
12 months
Note
If you want the TDS or MSDS or other details, please contact with our sales person.
-After we have RTV mold.It is ready for feeling.This is called Wax Injection.
-There are some parameters for Wax injector machine for proper fill up it. 1)Wax pot temperature (2)Injection Nozzle Temp. (3)Wax Pressure (4)wax pressure time (5)Mold Clamp pressure (6)Mold Clamp pressure/Release Time (6) cooling time.
-Each RTV mold have above different parameter depends on was pattern size,structure,cross section thickness.
Please visit www.spacecode.com
or e mail for more detail:pankaj.goyani@spacecode.com
Mob:+91-9712543736 (INDIA)
Watch the full episode: https://www.youtube.com/watch?v=WNF-kUSfy80
Richard Trethewey shows an innovative new way to seal ducts from the inside. (See below for steps.)
Click here to SUBSCRIBE to the official This Old House YouTube channel: https://www.youtube.com/subscription_center?add_user=thisoldhouse
Watch new episodes of Ask TOH: https://www.thisoldhouse.com/toh/tv/ask-toh/video/0,,,00.html
Steps for How to Seal Leaky Ductwork:
1. Remove the grilles from all of the supply and return registers.
2. Plug each duct register with foam rubber and wide strips of tape.
3. Pressurize the duct system with a blower fan.
4. Use a computer to analyze the data to determine the amount of air leaking from the ducts.
5. Use the blower fan to mist the inside of all the dust with liquid-rubber sealant.
6. The sealant will find and plug all air-leaking holes, cracks, and seams.
7. After applying the sealant, run another pressurized blower test to verify the improved results.
Follow This Old House and Ask This Old House:
Facebook: https://www.facebook.com/ThisOldHouse
Twitter: https://twitter.com/thisoldhouse
https://twitter.com/asktoh
Pinterest: https://www.pinterest.com/thisoldhouse/
G+: https://plus.google.com/+thisoldhouse/posts
Instagram: https://instagram.com/thisoldhouse
Tumblr: https://thisoldhouse.tumblr.com/
