29 Years Factory SV-8800 Silicone Sealant for Insulating Glass Export to Brisbane

29 Years Factory
 SV-8800 Silicone Sealant for Insulating Glass Export to Brisbane
  • 29 Years Factory
 SV-8800 Silicone Sealant for Insulating Glass Export to Brisbane29 Years Factory
 SV-8800 Silicone Sealant for Insulating Glass Export to Brisbane
  • 29 Years Factory
 SV-8800 Silicone Sealant for Insulating Glass Export to Brisbane29 Years Factory
 SV-8800 Silicone Sealant for Insulating Glass Export to Brisbane
  • 29 Years Factory
 SV-8800 Silicone Sealant for Insulating Glass Export to Brisbane29 Years Factory
 SV-8800 Silicone Sealant for Insulating Glass Export to Brisbane

Short Description:

Description SV-8800 is two components, high modulus; neutral curing silicone sealant specifically developed for assembly of high performance insulated glass units as secondary sealing material.   Where to use It is a two-component silicone that offers variable work life with high bonding strength to maintain the integrity of insulating glass unit, suits both commercial and residential IGU.   Key Features 1. High Modulus 2. UV resistance 3. Low vapor and gas transmission 4. Primerless adhesion...


Product Detail

Attentions

Application

Product Tags

The key to our success is "Good Product Quality, Reasonable Price and Efficient Service" for 29 Years Factory SV-8800 Silicone Sealant for Insulating Glass Export to Brisbane, We sincerely welcome friends from all over the world to cooperate with us on the basis of long-term mutual benefits.


Description

SV-8800 is two components, high modulus; neutral curing silicone sealant specifically developed for assembly of high performance insulated glass units as secondary sealing material.

 

Where to use

It is a two-component silicone that offers variable work life with high bonding strength to maintain the integrity of insulating glass unit, suits both commercial and residential IGU.

 

Key Features

1. High Modulus

2. UV resistance

3. Low vapor and gas transmission

4. Primerless adhesion to coated glass

5. 100% compatible to SV-8890

 

Technical data sheet

Test standard Test project Unit value
Before curing——25℃,50%R.H.
GB13477 Specific gravity(After mixing)   1.33
GB13477 Operating time min 20-40
GB13477 surface drying time(25℃,50%R.H.) min 80-188
corrosivity     No
7 days after curing——25℃,50%R.H.
GB/T 531 Durometer Hardness Shore A 40
GB13477 The tensile modulus at 12.5% elongation Mpa 0.18
  The ultimate tensile strength Mpa 0.92
GB13477 Elongation limit (fracture) % 150

 

Certification

GB-24266-2009;

 

Color

Component A(Base) – White, Component B(Catalyst)- Black

 

Package

1. Component A(Base): (190L), Component B(Catalyst) (18.5L)

2. Component A(Base):24.5kg (18L), Component B(Catalyst): 1.9kg (1.8L)

 

Shelf life

12 months

 

Note

If you want the TDS or MSDS or other details, please contact with our sales person.

  • Previous:
  • Next:



  • Waterproof garments can lose their water repellency as dirt and oil break down the water repellent coating. If you notice that the fabric of your jacket is absorbing rather than repelling water, it may be time to reproof it.

    1. Always wash your waterproof jacket first before re-proofing.

    2. There are two types of clothing proofer to choose from; wash in or spray on. You will first need to decide which is most appropriate for you. Our proofers should not alter the look or handle of the fabric. It is however recommended that the products are tried on a small, inconspicuous test area before spraying on or washing into the garment.

    3. If using a wash in proofer, such as our Performance Proofer, first pour the appropriate amount of the proofer into the detergent compartment. For the Performance Proofer this will be two caps full for one jacket and three caps full for two. Allow the washing machine to run through the complete wash and rinse cycle at 30 degrees. Heat helps to activate the product, so if the jacket’s care instructions allow it you can tumble dry the jacket on a low or medium heat.

    4. If you’re using a re-proofer spray, such as our Technical Proofer, spray the product evenly on the outside of the jacket from approximately 15-20 cm away. Hanging the jacket on a washing line when spraying with the proofer will help maintain an even coating. Check the jacket carefully to ensure no areas of the fabric have been missed and wipe off any excess with a damp cloth. Allow the jacket to dry naturally. For high abrasion areas such as the elbows and shoulders, it’s recommended that a second coat of proofer is applied. Again, allow to dry naturally.

    Shop: https://bit.ly/1fMaeAs

    Related Products

    WhatsApp Online Chat !