High Quality for SV-8800 Silicone Sealant for Insulating Glass for Sydney Factories

High Quality for
 SV-8800 Silicone Sealant for Insulating Glass for Sydney Factories
  • High Quality for
 SV-8800 Silicone Sealant for Insulating Glass for Sydney FactoriesHigh Quality for
 SV-8800 Silicone Sealant for Insulating Glass for Sydney Factories
  • High Quality for
 SV-8800 Silicone Sealant for Insulating Glass for Sydney FactoriesHigh Quality for
 SV-8800 Silicone Sealant for Insulating Glass for Sydney Factories
  • High Quality for
 SV-8800 Silicone Sealant for Insulating Glass for Sydney FactoriesHigh Quality for
 SV-8800 Silicone Sealant for Insulating Glass for Sydney Factories

Short Description:

Description SV-8800 is two components, high modulus; neutral curing silicone sealant specifically developed for assembly of high performance insulated glass units as secondary sealing material.   Where to use It is a two-component silicone that offers variable work life with high bonding strength to maintain the integrity of insulating glass unit, suits both commercial and residential IGU.   Key Features 1. High Modulus 2. UV resistance 3. Low vapor and gas transmission 4. Primerless adhesion...


Product Detail

Attentions

Application

Product Tags

Our development depends on the advanced equipment ,excellent talents and continuously strengthened technology forces for High Quality for SV-8800 Silicone Sealant for Insulating Glass for Sydney Factories, We welcome you to visit our factory and look forward to establishing friendly business relationships with customers at home and abroad in the near future.


Description

SV-8800 is two components, high modulus; neutral curing silicone sealant specifically developed for assembly of high performance insulated glass units as secondary sealing material.

 

Where to use

It is a two-component silicone that offers variable work life with high bonding strength to maintain the integrity of insulating glass unit, suits both commercial and residential IGU.

 

Key Features

1. High Modulus

2. UV resistance

3. Low vapor and gas transmission

4. Primerless adhesion to coated glass

5. 100% compatible to SV-8890

 

Technical data sheet

Test standard Test project Unit value
Before curing——25℃,50%R.H.
GB13477 Specific gravity(After mixing)   1.33
GB13477 Operating time min 20-40
GB13477 surface drying time(25℃,50%R.H.) min 80-188
corrosivity     No
7 days after curing——25℃,50%R.H.
GB/T 531 Durometer Hardness Shore A 40
GB13477 The tensile modulus at 12.5% elongation Mpa 0.18
  The ultimate tensile strength Mpa 0.92
GB13477 Elongation limit (fracture) % 150

 

Certification

GB-24266-2009;

 

Color

Component A(Base) – White, Component B(Catalyst)- Black

 

Package

1. Component A(Base): (190L), Component B(Catalyst) (18.5L)

2. Component A(Base):24.5kg (18L), Component B(Catalyst): 1.9kg (1.8L)

 

Shelf life

12 months

 

Note

If you want the TDS or MSDS or other details, please contact with our sales person.

  • Previous:
  • Next:



  • After our extended snowbird trip down south I like to go over our Cougar fifth wheel trailer with a fine tooth comb looking for defects. This spring I discovered a small leaky seal in one corner of the slide out room. Luckily it hadn’t had a chance to progress too far. Still, though, it had weakened a small area of the floorboard.

    I found the leak was caused by a small opening in the external silicone sealant. Silicone caulking will dry out over time leaving openings for water to penetrate. Water had seeped in over time and wetted the floor board making it a bit spongy. Given enough time I’m sure it would have rotted away completely and led to a structural failure of the slide room. Glad I caught it early!

    To repair the problem, I first removed the external flange and scraped away the old silicone caulk using a plastic chisel, scotch pad, and my thumbnail. To help loosen up the old caulking, I use a product called “Goo Gone Caulk Remover.” With around a 1/2 hour of effort, I was able to get rid of pretty well all the old silicone. Extremely important as nothing will stick to silicone.

    Next, I drove several 1 1/4 inch Teks Screws through the affected board area and into an aluminum beam above it. I made sure the screw was countersunk into the wood as not to catch when the slide is drawn in.

    Finally, I reattached the flange and resealed it with a product called SikaFlex 290, a high-end marine grade sealant. I smoothed out the SikaFlex and made a smooth seam using a special caulking tool. The tool comes with multi-sized flexible trowls. Then cleaned up the overflow bits and let cure.

    ———————————–
    Follow our RVing adventures at https://www.loveyourrv.com and https://rvhappyhour.com

    Connect with Love Your RV!

    Pinterest ► https://www.pinterest.com/loveyourrv
    Google+ ► https://plus.google.com/+LoveYourRVonGPLUS
    Facebook ► https://www.facebook.com/LoveYourRV
    Twitter ► https://twitter.com/loveyourrv
    Blog Feed ► https://feeds.feedburner.com/LoveYourRV
    Monthly Newsletter ► https://www.loveyourrv.com/mailing-list-sign-up/

    Don’t forget to Subscribe! ► https://www.youtube.com/subscription_center?add_user=LoveYourRV

    Related Products

    WhatsApp Online Chat !