Wholesale 100% Original Siway SV-602 Epoxy Structural Adhesive A/B for Nepal Manufacturer

Wholesale 100% Original Siway SV-602 Epoxy Structural Adhesive A/B for Nepal Manufacturer
  • Wholesale 100% Original Siway SV-602 Epoxy Structural Adhesive A/B for Nepal ManufacturerWholesale 100% Original Siway SV-602 Epoxy Structural Adhesive A/B for Nepal Manufacturer

Short Description:

Description SV-602 is a 2-part structural epoxy adhesive developed for such application as dry fixing cladding. It has strong adhesion to metals, woods, reinforced plastics stone, ceramic and masonry. It is the best choice for bonding parts which must withstand weather, moisture and temperature fluctuations. SV-602 will adhere with minimum surface preparation and has a low coefficient of expansion.   Key Features 1. Room temperature curing Epoxy adhesive 2. Fast cure at room temperature,...


Product Detail

Attentions

Application

Product Tags

We are proud of the high customer satisfaction and wide acceptance due to our persistent pursuit of high quality both on product and service for Wholesale 100% Original Siway SV-602 Epoxy Structural Adhesive A/B for Nepal Manufacturer, We welcome you to join us in this path of creating a prosperous and efficient business together.


Description

SV-602 is a 2-part structural epoxy adhesive developed for such application as dry fixing cladding. It has strong adhesion to metals, woods, reinforced plastics stone, ceramic and masonry. It is the best choice for bonding parts which must withstand weather, moisture and temperature fluctuations. SV-602 will adhere with minimum surface preparation and has a low coefficient of expansion.

 

Key Features

1. Room temperature curing Epoxy adhesive

2. Fast cure at room temperature, <40 min for reaching a tack-free status under standard environment (STD: 23℃, 50% humidity)

3. Mix ratio of 1:1 by volume or by weight

4. Good mechanical property

5. Bonds a wide variety of building materials

6. Good waterproofing and chemical resistance

 

Basic Application

1, the external walls of stone material, ceramic and other hang bond;

2, concrete, ceramics, stone, wood and other prefabricated split, bonding and jointing;

3, concrete, stone and so on crack repair;

4, the structure of the localization, anchor, reinforcement and reinforcement.

 

Technical data sheet

The following data is for reference only and is not recommended for the specification

Shear strength Stainless steel-stainless steel/Standard conditions ≥18   JC887-2001
Pressure shear strength Stone-stone/ Standard conditions ≥12
Stone-stone/ The freeze-thaw cycle 50 times ≥10
Stone – stainless steel/ Standard conditions ≥12
Standard conditions:Temperature=23℃,relative humidity=50%,48 hours curing
attribute SV-602-A SV-602-B SV-602(After mixing)
Colour gray white grey
Density(g/cm³) 1.8 1.8 1.8
Viscosity(PaS) 200-400 150-250  
Effective operating time(23℃) N/A N/A 20min
           

 

Certification

JC 887-2001

 

Color

Part A-Grey Paste/Part B-White Paste

 

Package

9kg/9kg per unit and 15kg/15kg per unit

 

Shelf life

12 months

 

Note

If you want the TDS or MSDS or other details, please contact with our sales person.

  • Previous:
  • Next:



  • https://ridofmice.net Rid-O-Mice

    Find the points of entry for mice and seal them up. Get Rid Of Mice.

    This is a tough but not impossible task. Mice can enter tiny spaces no wider than the width of their nose so 1/4 inch. If their nose can fit so can the rest of their head and body.

    You need to complete a full inspection of the exterior of your home from foundation to top of roof.

    There are common entry points to deal with right away:

    1. Weep holes are the most common – properly fill them with Rid-O-Mice Stainless Steel Weep hole covers.

    2. Where utility pipes and vents breach your wall. These pipes usually have gaps in the wall around them that mice easily walk through. Grab wire pads that you can stuff in the spaces and seal with caulking.

    3. Seal other cracks and cover open holes with wall plates where possible.

    4. Ensure door frames, window frames are not compromised including how the garage door closes.

    5. Seal the gap between the brick and the soffit and facia of your home. Mice run up the side of wall and poke right into your house this way. This is also common for bats so be sure to take this preventative measure.

    There are many more tips at our website for do it yourself pest control and diy mouse removal were you can also search for a pest removal professional in your area.

    https://www.ridofmice.net

    5 ways mice get in naturally – https://www.wikihow.com/Get-Rid-of-Mice-Naturally

    Weep Holes – https://en.wikipedia.org/wiki/Weep

    3 Ways to get a mouse out of the house: https://www.wikihow.com/Get-a-Mouse-Out-of-the-House



    This easy 3-step project demonstrates how to build an attic hatch that also provides insulation. Includes the tools you will need.

    Related Products

    WhatsApp Online Chat !