Well-designed SV-8800 Silicone Sealant for Insulating Glass to Uganda Factories

Well-designed
 SV-8800 Silicone Sealant for Insulating Glass to Uganda Factories
  • Well-designed
 SV-8800 Silicone Sealant for Insulating Glass to Uganda FactoriesWell-designed
 SV-8800 Silicone Sealant for Insulating Glass to Uganda Factories
  • Well-designed
 SV-8800 Silicone Sealant for Insulating Glass to Uganda FactoriesWell-designed
 SV-8800 Silicone Sealant for Insulating Glass to Uganda Factories
  • Well-designed
 SV-8800 Silicone Sealant for Insulating Glass to Uganda FactoriesWell-designed
 SV-8800 Silicone Sealant for Insulating Glass to Uganda Factories

Short Description:

Description SV-8800 is two components, high modulus; neutral curing silicone sealant specifically developed for assembly of high performance insulated glass units as secondary sealing material.   Where to use It is a two-component silicone that offers variable work life with high bonding strength to maintain the integrity of insulating glass unit, suits both commercial and residential IGU.   Key Features 1. High Modulus 2. UV resistance 3. Low vapor and gas transmission 4. Primerless adhesion...


Product Detail

Attentions

Application

Product Tags

In order to best meet client's needs, all of our operations are strictly performed in line with our motto " High Quality, Competitive Price, Fast Service " for Well-designed SV-8800 Silicone Sealant for Insulating Glass to Uganda Factories, Inspired by the rapid developing market of the fast food and beverage consumables all over the world , We are looking forward to working with partners /clients to make success together .


Description

SV-8800 is two components, high modulus; neutral curing silicone sealant specifically developed for assembly of high performance insulated glass units as secondary sealing material.

 

Where to use

It is a two-component silicone that offers variable work life with high bonding strength to maintain the integrity of insulating glass unit, suits both commercial and residential IGU.

 

Key Features

1. High Modulus

2. UV resistance

3. Low vapor and gas transmission

4. Primerless adhesion to coated glass

5. 100% compatible to SV-8890

 

Technical data sheet

Test standard Test project Unit value
Before curing——25℃,50%R.H.
GB13477 Specific gravity(After mixing)   1.33
GB13477 Operating time min 20-40
GB13477 surface drying time(25℃,50%R.H.) min 80-188
corrosivity     No
7 days after curing——25℃,50%R.H.
GB/T 531 Durometer Hardness Shore A 40
GB13477 The tensile modulus at 12.5% elongation Mpa 0.18
  The ultimate tensile strength Mpa 0.92
GB13477 Elongation limit (fracture) % 150

 

Certification

GB-24266-2009;

 

Color

Component A(Base) – White, Component B(Catalyst)- Black

 

Package

1. Component A(Base): (190L), Component B(Catalyst) (18.5L)

2. Component A(Base):24.5kg (18L), Component B(Catalyst): 1.9kg (1.8L)

 

Shelf life

12 months

 

Note

If you want the TDS or MSDS or other details, please contact with our sales person.

  • Previous:
  • Next:



  • HOW TO WATERPROOF AND IMPROVE THE APPEARANCE OF ROOFS, ALSO ON HEAT-SENSITIVE LAYING SURFACES
    If the waterproof covering comprises the final (visible) part of a roof, problems can arise relating to the environmental impact or the overall appearance of structures, which are more complicated if the laying surface is heat-sensitive.
    To overcome these inconvenience, it is advisable to use a product that guarantees full waterproofing but also fulfils the aesthetic requirements of the roof and can be applied cold.

    SOLUTION
    MINERAL DESIGN SELF-ADHESIVE EP SELFLAPS POLYESTER is similar to the OVERLAPS version of the membrane with the difference that the selvedge is self-adhesive and can be bonded without using a torch. It is to be used exclusively for laying on wooden boards and on surfaces of limited proportions (smaller than 200 m2).
    To stabilise the overlap area further and to limit any tension that could strain it, MINERAL DESIGN SELF-ADHESIVE EP SELFLAPS POLYESTER is appropriately produced with a sanded edge of roughly 3 cm, to enable mechanical fixing with nails or staples before removing the protective silicone-treated strip of the self-adhesive selvedge and sealing the overlaps.

    APPLICATION FIELDS
    The sheets of MINERAL DESIGN SELF-ADHESIVE EP SELFLAPS POLYESTER are laid in the same way as for the OVERLAPS version and are secured every 10÷15 cm along the longitudinal overlap with nails with large heads of 1 cm in diameter or with a stapler.
    On pitches above 15%, the measurements and the mechanical fixing method on the ends of the sheets is the same type as the previous case. The longitudinal overlaps are bonded by self-adhesion, making sure to compress thoroughly using a roller, whereas the end overlaps are bonded using cold adhesive HEADCOLL.

    METHOD OF USE AND PRECAUTIONS: Please follow instructions listed in the technical data sheet carefully

    Technical Data-sheets

    https://www.indexspa.it/Indexspacom/Tecnoplan/pdf/MINERAL_DESIGN_AUTO-EN.pdf

    www.index-spa.com
    index.export@indexspa.it


    Related Products

    WhatsApp Online Chat !