Tiling the public shower: Sealing and impregation

https://www.ceresit.com
Tiling the public shower: Sealing and impregation
Products:
CS 40
CS 25

https://www.ceresit.com/en/products/tiling/grouts-and-sealants/cs-25-sanitary-silicone.html

CS 29
CT 10

https://www.ceresit.com/en/products/waterproofing/facades-walls/silicone-based-products/ct-10-balcony-impregnation-agent.html

Description:
When the grouts are completely dry, seal all connection joints. In some places, like corners, an additional filling is required – in that case use an expansion joint string. Put the string into the expansion joint. Then perform the final silicone sealing. To smoothen the joint, moisture it with a water and soap mixture. Remove the excessive silicone with a plastic spatula. For around the critical areas such as pipe inlets, we recommend to use the proper silicone. For additional protection and impregnation of the joints, apply a transparent impregnation agent. Cover both the joints and the tiles.

Ceresit
Quality for Professionals