Short Lead Time for Siway SV-602 Epoxy Structural Adhesive A/B to Stuttgart Importers
Short Description:
Description SV-602 is a 2-part structural epoxy adhesive developed for such application as dry fixing cladding. It has strong adhesion to metals, woods, reinforced plastics stone, ceramic and masonry. It is the best choice for bonding parts which must withstand weather, moisture and temperature fluctuations. SV-602 will adhere with minimum surface preparation and has a low coefficient of expansion. Key Features 1. Room temperature curing Epoxy adhesive 2. Fast cure at room temperature,...
We aim to find out quality disfigurement from the production and supply the best service to domestic and overseas customers wholeheartedly for Short Lead Time for Siway SV-602 Epoxy Structural Adhesive A/B to Stuttgart Importers, We look forward to supplying you with our products in the near future, and you will find our quotation is very reasonable and the quality of our products is very excellent!
Description
SV-602 is a 2-part structural epoxy adhesive developed for such application as dry fixing cladding. It has strong adhesion to metals, woods, reinforced plastics stone, ceramic and masonry. It is the best choice for bonding parts which must withstand weather, moisture and temperature fluctuations. SV-602 will adhere with minimum surface preparation and has a low coefficient of expansion.
Key Features
1. Room temperature curing Epoxy adhesive
2. Fast cure at room temperature, <40 min for reaching a tack-free status under standard environment (STD: 23℃, 50% humidity)
3. Mix ratio of 1:1 by volume or by weight
4. Good mechanical property
5. Bonds a wide variety of building materials
6. Good waterproofing and chemical resistance
Basic Application
1, the external walls of stone material, ceramic and other hang bond;
2, concrete, ceramics, stone, wood and other prefabricated split, bonding and jointing;
3, concrete, stone and so on crack repair;
4, the structure of the localization, anchor, reinforcement and reinforcement.
Technical data sheet
The following data is for reference only and is not recommended for the specification
| Shear strength | Stainless steel-stainless steel/Standard conditions | ≥18 | JC887-2001 | ||
| Pressure shear strength | Stone-stone/ Standard conditions | ≥12 | |||
| Stone-stone/ The freeze-thaw cycle 50 times | ≥10 | ||||
| Stone – stainless steel/ Standard conditions | ≥12 | ||||
| Standard conditions：Temperature=23℃，relative humidity=50%，48 hours curing | |||||
| attribute | SV-602-A | SV-602-B | SV-602(After mixing) | ||
| Colour | gray | white | grey | ||
| Density(g/cm³) | 1.8 | 1.8 | 1.8 | ||
| Viscosity（PaS） | 200-400 | 150-250 | |||
| Effective operating time(23℃) | N/A | N/A | 20min | ||
Certification
JC 887-2001
Color
Part A-Grey Paste/Part B-White Paste
Package
9kg/9kg per unit and 15kg/15kg per unit
Shelf life
12 months
Note
If you want the TDS or MSDS or other details, please contact with our sales person.
Evostik Sticks Like Turbo tested head to head against CT1 power grab & bond.
Block pavers bonded vertically face on face at 15 minute intervals.
Foundation Waterproofing.
Click here: https://amzn.to/1Pcgf3o .
I bought Rubberseal Roll On to coat the inside of a plywood vivarium (48″L x 28″width (depth) x 72″H). I needed water resistant top and sides so coated the top half with 1/32 of an inch (30 mil) and the lower half and bottom with a thicker coat of about 1/16 of an inch (60mil) to get a waterproof seal. I used a roller for the top sides and a brush to coat the corners. A brush will let you lay this on thick. I have some very thick areas on the bottom especially in corners where plywood meets the frame. Be aware this takes at least 72 hrs to dry and not be tacky to the touch and depending on thickness can take longer.Other products I used with Rubberseal Roll On:I was concerned that silicone will not adhere to the rubber but it worked beautifully. I used GE 100% Silicone I (black). I added cork sheets to the upper walls and coconut coir over the silicone in other areas.Great Stuff adhered with no problem also. And once carved and shaped you can use the black silicone to blend it in. I used globs on the walls and used them for plant anchor points.Liquid Nails will adhere to the rubber also, but takes a bit for it to get a good grip. you may need to tape things in place till the glue dries.Tips:you may scratch the rubber off the walls with decor (adding large branches and such) if you are not careful. Silicone can touch up these spots or if you have some RubberSeal left over you can re+touchup as needed.Wear gloves as this becomes extremely sticky and buy 3 or 4 cheap paint brushes or rollers for each day you are going to add a coat since the RubberSeal will dry to the brush/roller and make it unusable after a few hours.The one gallon can I bought was just enough for this size build.Read more ›.
1. Rubberseal Liquid Rubber Waterproofing and Protective Coating ++ Roll On
2. Rubberseal Liquid Rubber Waterproofing and Protective Coating ++ Roll On 5 GALLON BLACK
3. LastiSeal® Brick & Masonry Sealer (5+gal) | All Purpose Sealer for Brick, Concrete, Stone, & Porous Masonry |…
4. Ames BMX5RG Blue Max Liquid Rubber
5. S2000 Basement Wall & Floor Sealer
6. Hydro+Seal 75 Waterpoofing Epoxy 1 Gallon Kit + Resists over 40 psi, no VOC, Odor Free, Water+based Epoxy. Just…
7. Rubberseal Liquid Rubber Waterproofing and Protective Coating ++ Trowel On 1 Gallon
