Renewable Design for Siway SV-602 Epoxy Structural Adhesive A/B to Istanbul Manufacturers

Renewable Design for
 Siway SV-602 Epoxy Structural Adhesive A/B to Istanbul Manufacturers
  • Renewable Design for
 Siway SV-602 Epoxy Structural Adhesive A/B to Istanbul ManufacturersRenewable Design for
 Siway SV-602 Epoxy Structural Adhesive A/B to Istanbul Manufacturers

Short Description:

Description SV-602 is a 2-part structural epoxy adhesive developed for such application as dry fixing cladding. It has strong adhesion to metals, woods, reinforced plastics stone, ceramic and masonry. It is the best choice for bonding parts which must withstand weather, moisture and temperature fluctuations. SV-602 will adhere with minimum surface preparation and has a low coefficient of expansion.   Key Features 1. Room temperature curing Epoxy adhesive 2. Fast cure at room temperature,...


Product Detail

Attentions

Application

Product Tags

We have the most advanced production equipment, experienced and qualified engineers and workers, recognized quality control systems and a friendly professional sales team pre/after-sales support for Renewable Design for Siway SV-602 Epoxy Structural Adhesive A/B to Istanbul Manufacturers, we are seeking for extensive cooperation with honest customers, achieving a new cause of glory with customers and strategic partners.


Description

SV-602 is a 2-part structural epoxy adhesive developed for such application as dry fixing cladding. It has strong adhesion to metals, woods, reinforced plastics stone, ceramic and masonry. It is the best choice for bonding parts which must withstand weather, moisture and temperature fluctuations. SV-602 will adhere with minimum surface preparation and has a low coefficient of expansion.

 

Key Features

1. Room temperature curing Epoxy adhesive

2. Fast cure at room temperature, <40 min for reaching a tack-free status under standard environment (STD: 23℃, 50% humidity)

3. Mix ratio of 1:1 by volume or by weight

4. Good mechanical property

5. Bonds a wide variety of building materials

6. Good waterproofing and chemical resistance

 

Basic Application

1, the external walls of stone material, ceramic and other hang bond;

2, concrete, ceramics, stone, wood and other prefabricated split, bonding and jointing;

3, concrete, stone and so on crack repair;

4, the structure of the localization, anchor, reinforcement and reinforcement.

 

Technical data sheet

The following data is for reference only and is not recommended for the specification

Shear strength Stainless steel-stainless steel/Standard conditions ≥18   JC887-2001
Pressure shear strength Stone-stone/ Standard conditions ≥12
Stone-stone/ The freeze-thaw cycle 50 times ≥10
Stone – stainless steel/ Standard conditions ≥12
Standard conditions:Temperature=23℃,relative humidity=50%,48 hours curing
attribute SV-602-A SV-602-B SV-602(After mixing)
Colour gray white grey
Density(g/cm³) 1.8 1.8 1.8
Viscosity(PaS) 200-400 150-250  
Effective operating time(23℃) N/A N/A 20min
           

 

Certification

JC 887-2001

 

Color

Part A-Grey Paste/Part B-White Paste

 

Package

9kg/9kg per unit and 15kg/15kg per unit

 

Shelf life

12 months

 

Note

If you want the TDS or MSDS or other details, please contact with our sales person.

  • Previous:
  • Next:




  • https://www.briskheat.com/p-332-vt-vac…

    VT Vacuum Curing and Debulking Table

    Specifications

    Temperature Control

    Dual display shows set-point and actual process temperature
    Multiple ramp / soak steps option
    Automatic tuning of PID parameters
    Programmable to either ° C or ° F
    Audible alarm
    Program security lock capabilities
    Sensor break protection
    Heating System

    Highly durable and uniform multi-stranded heating element for even heat distribution
    Heater break protection
    Vacuum System

    2 stage electric oil-less rocker piston vacuum pump
    Retractable Lid

    High tear strength, reversion resistant silicone rubber reusable vacuum bag with 800% elongation factor
    Greatly reduces setup time
    Safety interlocked push buttons ensure both hands are on the operating console while the lid is in motion
    Dual ball screw actuators for positive lid movement
    Power

    Your choice of 3-phase 200VAC, 208VAC, 240VAC, 277VAC, and 480VAC
    All systems are fuse protected

    BriskHeat Vacuum Curing and Debulking Table:

    Heat and vacuum in one easy step for debulking and curing composite parts. Single setup greatly reduces overall time and cost associated with traditional debulking and autoclave curing. Reusable and highly stretchable vacuum bag membrane form fits around your part. Curing temperatures up to 400 degrees F (204 degrees C). Acheive temperatures up to 600 degrees F on vacuum tables without lid (manual bagging lay-up required). Temperature Control: Dual display shows set-point and actual process temperature. Multiple ramp / soak steps option. Automatic tuning of PID parameters. Programmable to either degrees C or degrees F. Audible alarm. Program security lock capabilities. Sensor break protection. Heating System: Highly durable and uniform multi-stranded heating element for even heat distribution. Heater break protection. Vacuum System: 2 stage electric oil-less rocker piston vacuum pump. Retractable Lid. High tear strength, reversion resistant silicone rubber reusable vacuum bag with 800 percent elongation factor. Greatly reduces setup time. Safety interlocked push buttons ensure both hands are on the operating console while the lid is in motion. Dual ball screw actuators for positive lid movement. Power: Your choice of 3-phase 200VAC, 208VAC, 240VAC, 277VAC, and 480VAC. All systems are fuse protected. BriskHeat Vacuum Curing / Debulking Tables can be configured-to-order for your application. Please contact us for assistance and a quotation. Standard Table Sizes: VT4000: 60″ x 66″ total, 52″ x 56″ useable area: Single heat zone. VT8000: 60″ x 132″ total, 52″ x 124″ useable area: Two heat zones. VT10000: 72″ x 144″ total, 66″ x 138″ useable area: Two heat zones. Table Configuration Options: All table configurations include electric vacuum pump. A: Heated table without a retractable lid. Includes basic temperature control. (Manual bagging lay-up required). B: Heated table with a retractable lid. Includes basic temperature control. C: Heated table with a retractable lid. Includes ramp / soak temperature control. D: Heated table with a retractable lid. Includes ramp / soak temperature control and 16-channel monitor system. E: Heated table with a retractable lid. Includes ramp / soak temperature control, 16-channel monitor system, and digital data logger. Voltage Choices: 1: 200VAC, 3-phase. 2: 240VAC, 3-phase. 3: 208VAC, 3-phase. 4: 480VAC, 3-phase. 5: 277VAC, 3-phase. Please BriskHeat for assistance and a quotation.

    Related Products

    WhatsApp Online Chat !