Quality Inspection for CV-709 silicone sealant for PV moudels Supply to Swiss

Quality Inspection for CV-709 silicone sealant for PV moudels Supply to Swiss
  • Quality Inspection for CV-709 silicone sealant for PV moudels Supply to SwissQuality Inspection for CV-709 silicone sealant for PV moudels Supply to Swiss
  • Quality Inspection for CV-709 silicone sealant for PV moudels Supply to SwissQuality Inspection for CV-709 silicone sealant for PV moudels Supply to Swiss
  • Quality Inspection for CV-709 silicone sealant for PV moudels Supply to SwissQuality Inspection for CV-709 silicone sealant for PV moudels Supply to Swiss

Short Description:

Description CV709 is a high-performance silicone sealant, one-component oxime type room temperature curing silicone rubber, has excellent weather resistance, high thixotropy, after curing for solar components involved in the base material has good caking property, by TUV for environmental requirements of the ROHS, UL E339949   Key Features 1. 100% silicone 2. No sag 3. high thixotropy 4. Water & weatherproof 5. For solar components involved in the base material has good bonding   Basic Ap...


Product Detail

Attentions

Application

Product Tags

We insist on offering high quality production with good business concept, honest sales and the best and fast service. it will bring you not only the high quality product and huge profit, but the most significant is to occupy the endless market for Quality Inspection for CV-709 silicone sealant for PV moudels Supply to Swiss, We are sincerely looking forward to establishing good cooperative relationships with customers from at home and abroad for creating a bright future together.


Description

CV709 is a high-performance silicone sealant, one-component oxime type room temperature curing silicone rubber, has excellent weather resistance, high thixotropy, after curing for solar components involved in the base material has good caking property, by TUV for environmental requirements of the ROHS, UL E339949

 

Key Features

1. 100% silicone

2. No sag

3. high thixotropy

4. Water & weatherproof

5. For solar components involved in the base material has good bonding

 

Basic Application

1.Solar module frame seal

2.The adhesive of the solar energy back to the terminal block

3.General industrial assembly with seal

 

Technical data sheet

Test standard Test project Unit value
Before curing——25℃,50%R.H.
  specific gravity g/ml 1.34-1.40
GB13477 Operating time min 15
GB13477 surface drying time(25℃,50%R.H.) min 40-60
3 days after curing——25℃,50%R.H.
  Temperature range -55~200
GB13477 Durometer Hardness Shore A 40~55
  The ultimate tensile strength Mpa ≥2
GB13477 Breaking elongation % 300-600
  Aluminum bonding shear strength Mpa ≥1.5
Electrical properties
  Breakdown voltage Kv/mm ≥20
  Volume resistance ohm.cm 9E+14
  Dielectric constant   3.1@50Hz

 

Certification

UL E339949; TUV

 

Color

Black, White

 

Package

300ml in cartridge * 24 per box, 500ml in sausage *20 per box

 

Shelf life

12 months

 

Note

If you want the TDS or MSDS or other details, please contact with our sales person.

  • Previous:
  • Next:



  • Pre-Order:

    https://showerdoordriprail.com/index_files/PreOrderBathroomProducts.htm

    All of the Shower Door Drip Rails have completely Sold-Out but you can help to bring a better one back by Crowd Funding the project through Pre-Ordering yours now

    This How-To video walks you through the install of a Replacement Shower Drip Rail on a Neo Angle Framed Shower Door (Screen), which was leaking like a sieve, because water was escaping from everywhere.
    We started by cleaning the bottom 4″ of the glass along the bottom frame channels, using both Methyl Hydrate and Naptha (lighter fluid), then sealed between the glass and the frame with white caulk (clear may have looked better).
    Then we cut the Adjustable Shower Drip Rail to fit over the frame and laid it flat against the glass. We left about 2″ (50.8mm) of overhang beyond the hinge, so the water could drain into the pan.
    We made sure to create a steep rake of about 2½” (63.5mm) starting at the outer handle edge of the door and sloped it down towards the pan.
    The Peel N Stick transparent adhesive worked great, but we also use the caulk to fill in the cut outs between the glass and around the frame, as well as along the top of the rail, because we wanted to test it with water right away, because it really needs a minimum of 24hr. to cure.
    My friend Ali is extremely happy, because it saves him so much time and work from having to mop up all of the water that was flowing out of the shower enclosure.
    These 36″ (92cm) Universally Adjustable Shower Drip Rails can be retrofitted onto any flat Framed or Frame-less shower door. We will find other shower arrangements to show you how the Rails retrofit onto them. https://www.showerdoordriprail.com

    Related Products

    WhatsApp Online Chat !