Professional Manufacturer for Siway SV-602 Epoxy Structural Adhesive A/B for Ghana Factories
Description SV-602 is a 2-part structural epoxy adhesive developed for such application as dry fixing cladding. It has strong adhesion to metals, woods, reinforced plastics stone, ceramic and masonry. It is the best choice for bonding parts which must withstand weather, moisture and temperature fluctuations. SV-602 will adhere with minimum surface preparation and has a low coefficient of expansion. Key Features 1. Room temperature curing Epoxy adhesive 2. Fast cure at room temperature,...
With our leading technology as well as our spirit of innovation,mutual cooperation, benefits and development, we will build a prosperous future together with your esteemed company for Professional Manufacturer for Siway SV-602 Epoxy Structural Adhesive A/B for Ghana Factories, We sincerely welcome overseas customers to consult for the long-term cooperation and the mutual development.We strongly believe that we can do better and better.
SV-602 is a 2-part structural epoxy adhesive developed for such application as dry fixing cladding. It has strong adhesion to metals, woods, reinforced plastics stone, ceramic and masonry. It is the best choice for bonding parts which must withstand weather, moisture and temperature fluctuations. SV-602 will adhere with minimum surface preparation and has a low coefficient of expansion.
1. Room temperature curing Epoxy adhesive
2. Fast cure at room temperature, <40 min for reaching a tack-free status under standard environment (STD: 23℃, 50% humidity)
3. Mix ratio of 1:1 by volume or by weight
4. Good mechanical property
5. Bonds a wide variety of building materials
6. Good waterproofing and chemical resistance
1, the external walls of stone material, ceramic and other hang bond;
2, concrete, ceramics, stone, wood and other prefabricated split, bonding and jointing;
3, concrete, stone and so on crack repair;
4, the structure of the localization, anchor, reinforcement and reinforcement.
Technical data sheet
The following data is for reference only and is not recommended for the specification
|Shear strength||Stainless steel-stainless steel/Standard conditions||≥18||JC887-2001|
|Pressure shear strength||Stone-stone/ Standard conditions||≥12|
|Stone-stone/ The freeze-thaw cycle 50 times||≥10|
|Stone – stainless steel/ Standard conditions||≥12|
|Standard conditions：Temperature=23℃，relative humidity=50%，48 hours curing|
|Effective operating time(23℃)||N/A||N/A||20min|
Part A-Grey Paste/Part B-White Paste
9kg/9kg per unit and 15kg/15kg per unit
If you want the TDS or MSDS or other details, please contact with our sales person.
Each column consists from 7 different profiles that all together match like a puzzle and work like a gutter. Here in video you will see the system while the top aluminum profiles and also the upper rubbers have been removed in this case just to prove that the specific system needs the top profiles only for support..
Water will enter normally each column and goes away from the edges of the construction. Rubbers on the system are only for supporting gladding overlapping material and help in the thermo diastolic cases.
Glazetech creates a tailor-made system suitable for each project, by designing in mm each detail of it. A unique solution on architects, engineers and individuals’ disposal for creating projects for a life time, without maintenance costs, designing securely and without limits.
Now, maintenance costs are not supposed to accompany a skylight project.
A skylight system with real waterproofing ability certified under British standards and all these come with a 10 years written guarantee.
Please visit to see more : www.glazetech.gr
Shower floor installation. How to install mosaic tile on a shower floor. The mosaic tile in this shower floor is of a hexagonal shape, but the method I use here is also the same for a square mosaic tile installed on a shower stall floor. The reason a small mosaic tile is used on a shower floor with a center drain, is that when the deck mud was installed on the liner of the shower it was shaped to provide a positive pitch of a ¼” or more towards the drain. For this reason a larger tile cannot be used because it would be impossible to make the tile conform to the concave shape of the shower floor. A mosaic tile with all the spaces that the grout lines provide, make it easy for the tile to take the shape of the curved floor. First I dry lay the tile to determine how the tile will fit in the area of the shower stall floor, once the layout has been set I cut all the perimeter of the floor. The wall tile has not yet been installed in this shower so the tile does not have to be neat where it meets the backer board of the shower walls, because the wall tile will cover those edges. Attention must be given to the alignment of the tiles where it will be seen. With the entire field tile in place I then cut the tile around the drain to fit. Once this is done I pick up a section of the mosaic floor tile, and use a polymer modified thinset with a V-Notched trowel appropriate for the size of the tile, to install the tile on the shower floor. With the first section done I then remove the rest of the mosaic floor tile spread the thinset and finish the installation. The tile is then allowed to set for the appropriate amount of time, and then grouted.
All tile installed by Sal DiBlasi, Elite-tile Company, in the Boston North Shore area. This video contains affiliate links, which means I will receive a small commission if you click on the product link.
Products available at
National Tile Contractors Association