Professional China Siway SV-602 Epoxy Structural Adhesive A/B for Factory
Short Description:
Description SV-602 is a 2-part structural epoxy adhesive developed for such application as dry fixing cladding. It has strong adhesion to metals, woods, reinforced plastics stone, ceramic and masonry. It is the best choice for bonding parts which must withstand weather, moisture and temperature fluctuations. SV-602 will adhere with minimum surface preparation and has a low coefficient of expansion. Key Features 1. Room temperature curing Epoxy adhesive 2. Fast cure at room temperature,...
We will make every effort to be outstanding and perfect, and accelerate our steps for standing in the rank of international top-grade and high-tech enterprises for Professional China Siway SV-602 Epoxy Structural Adhesive A/B for Factory, We warmly welcome your participation based on mutual benefits in the near future.
Description
SV-602 is a 2-part structural epoxy adhesive developed for such application as dry fixing cladding. It has strong adhesion to metals, woods, reinforced plastics stone, ceramic and masonry. It is the best choice for bonding parts which must withstand weather, moisture and temperature fluctuations. SV-602 will adhere with minimum surface preparation and has a low coefficient of expansion.
Key Features
1. Room temperature curing Epoxy adhesive
2. Fast cure at room temperature, <40 min for reaching a tack-free status under standard environment (STD: 23℃, 50% humidity)
3. Mix ratio of 1:1 by volume or by weight
4. Good mechanical property
5. Bonds a wide variety of building materials
6. Good waterproofing and chemical resistance
Basic Application
1, the external walls of stone material, ceramic and other hang bond;
2, concrete, ceramics, stone, wood and other prefabricated split, bonding and jointing;
3, concrete, stone and so on crack repair;
4, the structure of the localization, anchor, reinforcement and reinforcement.
Technical data sheet
The following data is for reference only and is not recommended for the specification
| Shear strength | Stainless steel-stainless steel/Standard conditions | ≥18 | JC887-2001 | ||
| Pressure shear strength | Stone-stone/ Standard conditions | ≥12 | |||
| Stone-stone/ The freeze-thaw cycle 50 times | ≥10 | ||||
| Stone – stainless steel/ Standard conditions | ≥12 | ||||
| Standard conditions：Temperature=23℃，relative humidity=50%，48 hours curing | |||||
| attribute | SV-602-A | SV-602-B | SV-602(After mixing) | ||
| Colour | gray | white | grey | ||
| Density(g/cm³) | 1.8 | 1.8 | 1.8 | ||
| Viscosity（PaS） | 200-400 | 150-250 | |||
| Effective operating time(23℃) | N/A | N/A | 20min | ||
Certification
JC 887-2001
Color
Part A-Grey Paste/Part B-White Paste
Package
9kg/9kg per unit and 15kg/15kg per unit
Shelf life
12 months
Note
If you want the TDS or MSDS or other details, please contact with our sales person.
Watch more Home Repair & DIY videos: https://www.howcast.com/videos/395037-How-to-Repair-a-Hairline-Crack-in-a-Wall
There are two kinds of walls: the ones with cracks and the ones that will have cracks someday. Hold the house together with some easy and affordable quick fix ideas.
Step 1: Clean the area
Clean the drywall area and remove any loose bits of plaster, spackle, and grit, depending how wide the crack has gotten. Remove old tape, textures, or popped nail heads.
Step 2: Cut trench
Cut a trench wider than the crack with your utility knife to get more surface area for the compound to adhere to.
Step 3: Use mesh tape
Lay mesh tape in angled and deep spots that require too much compound to patch. Be sure to attach it an inch over either side of the crack.
Tip
You can choose between fast-drying or flexible compounds. Use water-resistant kinds in bathrooms.
Step 4: Sweep smoothly
Scoop out compound liberally with your knife and apply it to the area. Sweep the knife back and forth diagonally, angling it so the compound spreads and fills evenly. Use slow, careful pulls, feathering the compound.
Step 5: Allow to dry
Allow the first layer to dry following the compound manufacturer’s instructions.
Step 6: Sand with the wooden block
Wrap the sandpaper around a small block of wood to get a flat surface and sand the area. Pass a damp sponge over the area after it is dry to inspect it for grooves and blemishes.
Tip
If the crack returns, widens, or if more appear, the house may be settling faster than you thought or the structural integrity may be compromised. Call a contractor to inspect.
Step 7: Skim on second coat
Skim on a second, thinner layer of compound. Dry and sand again, without being too aggressive. Paint the wall and no one but you will ever know.
Did You Know?
The Associated Press reported that American imports of potentially tainted Chinese building materials exceeded 500 million pounds over four years, and might have been used in one hundred thousand homes.
