PriceList for SV-618 Acetic Glass Sealant for Russia Manufacturers

PriceList for
 SV-618 Acetic Glass Sealant for Russia Manufacturers
  • PriceList for
 SV-618 Acetic Glass Sealant for Russia ManufacturersPriceList for
 SV-618 Acetic Glass Sealant for Russia Manufacturers
  • PriceList for
 SV-618 Acetic Glass Sealant for Russia ManufacturersPriceList for
 SV-618 Acetic Glass Sealant for Russia Manufacturers

Short Description:

Description It is one-component acetoxy silicone sealant with fungicide to form a durable and flexible rubber seal resistant to water, mildew and mold.   Where to use SV-618  is an excellent candidate to consider the reliable prevention of mildew formation around fixtures in high humidity and temperature areas such as bath and kitchen rooms, swimming pool, facilities and lavatories. It also has good adhesion to most common building materials e.g. glass, tiles, ceramics and fiber glass, painte...


Product Detail

Attentions

Application

Product Tags

We offer great strength in quality and development,merchandising,sales and marketing and operation for PriceList for SV-618 Acetic Glass Sealant for Russia Manufacturers, Welcome to set up long-term relationship with us. Best Price For Good Quality in China.


Description

It is one-component acetoxy silicone sealant with fungicide to form a durable and flexible rubber seal resistant to water, mildew and mold.

 

Where to use

SV-618  is an excellent candidate to consider the reliable prevention of mildew formation around fixtures in high humidity and temperature areas such as bath and kitchen rooms, swimming pool, facilities and lavatories. It also has good adhesion to most common building materials e.g. glass, tiles, ceramics and fiber glass, painted wood.

 

Key Features

1. 100% silicone

2. Easy to apply

3. Highly efficient and safe bactericide

4. Low VOC

5. Proven Performer

 

Technical data sheet

Technical data sheet for reference,

  Test standard 1000
Appearance ISO 11600 Have no grain, no agglomerations
Extrudability,g/ml ISO 8394 450
Tack Free Time,min ASTM C 679 20
Density,g/cm3 ISO 1183 1.0
Slump,mm ISO 7390 0
Heat weight loss,% ISO 10563 7
Ultimate Tensile Strength,MPa ISO 8339 0.4
Ultimate Elongation,% ISO 8339 150
Ultimate Shear Strength, MPa ISO 4587 N/A

 

Certification

JC/T885-2001 20LM; and GB/T1741-2007 Mildew Proofing Grade 0

 

Color

clear, black, silver gray, white

 

Package

300ml in cartridge * 24 per box

 

Shelf life

12 months

 

Note

If you want the TDS or MSDS or other details, please contact with our sales person.

  • Previous:
  • Next:



  • How to install Stans Notubes tire system.

    Installation Guide:
    Deflate and dismount the tyre.
    Remove the inner tube.
    See the yellow tape; this is the tape that seals the rim toward the spokes. This is Stans rim tape that is required to make rim air tight.
    Install the valve and tighten the nut.
    Mount the tyre back on the rim and try to inflate it.
    If the tyre inflates and stays inflated for a couple of minutes it means
    you can make tubeless with this combination of rim and tyre. You may need the air compressor for the job but most certainly a big pump. You cannot inflate the tire with small portable pumps.
    Deflate the tyre and take it off the rim on one small section.
    Shake the bottle and pour sealant into the tyre.
    Turn the wheel with open section up and mount the tyre back on the rim.
    Inflate the tyre.
    Now shake the wheel and turn it around so the sealant will equally distribute
    inside and seal all the gaps.
    Place the wheel on a bucket and wait for a min or two then turn it over.
    Check for the air bubbles with the soap and water. If you see any shake the wheel some more until the sealant seals the holes.

    Related Products

    WhatsApp Online Chat !