PriceList for Siway PU FOAM for Manila Importers

PriceList for
 Siway PU FOAM for Manila Importers
  • PriceList for
 Siway PU FOAM for Manila ImportersPriceList for
 Siway PU FOAM for Manila Importers
  • PriceList for
 Siway PU FOAM for Manila ImportersPriceList for
 Siway PU FOAM for Manila Importers
  • PriceList for
 Siway PU FOAM for Manila ImportersPriceList for
 Siway PU FOAM for Manila Importers

Short Description:

Description This product is the expansion, moisture curing, has the strong cohesiveness, elastic foam obturator structure; Save work to save time, reduce waste; High bond strength; Bubble can stick in the concrete, wood, metal, plastic, such as base material surface, but not including teflon, silicon resins;   Key Features 1. Noise silencing effect 2. Strong bonding strength 3. Water & weatherproof 4. Primerless adhesion to most building materials   Basic Application 1.Doors and Windows a...


Product Detail

Attentions

Application

Product Tags

Our team through professional training. Skilled professional knowledge, strong sense of service, to meet the service needs of customers for PriceList for Siway PU FOAM for Manila Importers, Our mission is to help you create long-lasting relationships with your clients through the power of promotional products.


Description

This product is the expansion, moisture curing, has the strong cohesiveness, elastic foam obturator structure; Save work to save time, reduce waste; High bond strength;

Bubble can stick in the concrete, wood, metal, plastic, such as base material surface, but not including teflon, silicon resins;

 

Key Features

1. Noise silencing effect

2. Strong bonding strength

3. Water & weatherproof

4. Primerless adhesion to most building materials

 

Basic Application

1.Doors and Windows and wall body between the gap filling sealing, fixed bond

2.Language lab, studio, etc when decorating, gap to fill

 

Technical data sheet

Project

Value

Density, Kg/m³,Not less

10

Thermal conductivity,35℃,W/(m·K) no more than

0.050

Dimensional stability(23±2)℃,48,h no more than

5

Operating temperature

-10~+35℃

Optimum operating temperature

+18~+25℃

Temperature range(After curing)

-35~+80℃

Tensile bond strength

kPa

Not less

Aluminum plate

Standard condition,7d

80

Immersion,7d

60

PVC plate

Standard condition,7d

80

Immersion,7d

60

Cement Plate

Standard condition,7d

60

Shear strength,kpa,Not less

80

Foam expansion ratio,Not less

Standard value-10

 

Certification

JC 936-2004

 

Color

White

 

Package

750ml in Bottle * 12 per box

 

Shelf life

12 months

 

Note

If you want the TDS or MSDS or other details, please contact with our sales person.

  • Previous:
  • Next:



  • This video shows you how to successfully re-seal of newly seal your bath using silicone seal. We show you how to prepare the bath and wall and how to smooth out your silicone seal perfectly.

    ***VISIT OUR SPONSORS***
    https://www.traderadiators.com | https://www.grahamplumbersmerchant.co.uk | https://www.buteline.com/uk

    ***WEBSITE***

    https://www.plumberparts.co.uk

    Plumberparts.co.uk, Honest reviews and advice.
    Hold tight and welcome to today’s plumberparts.co.uk video. Today this is a very very simple video if you do one thing. We’re gonna show you today how to silicone a bath after it’s been installed where the tile is butting down on to the side of the bath like that. That’s pretty much how you usually want them. A lot of the time if the tiler came in first it will be up like that. I mean it’s not a big deal. That’s why siliconing is so important though because it’s the finish of the job it closes seals and it makes the side of the bath watertight. So, let’s have a go at doing that now, this shouldn’t be too hard, you should find it quite easy. If you have any questions or anything like that at the end of the video, just let us know. So, let’s go.
    Here is the beautiful bath in question. Now we are going to silicone around there and then back up and around this little piece here. The best thing we could do first, if we do anything else, is close that plug hole, turn these two taps on, and actually fill the bath about, so high. So then the bath is actually in the position it would be when it’s full of water, and it’s stretched these joints along here, so our silicone will go in. When the bath is empty, it will rise back up and fully seal properly. So let’s do that now. (tap running) Obviously make sure that all your surfaces are clean, make sure there’s no dust, any old silicone, or anything like that, before you actually put the silicone on. We’re gonna wait for this to fill up to about half full and then I’ll show you how to apply the silicone and then smooth it off so it looks absolutely amazing. Anyway I think it looks amazing but anyway let’s go. Hold tight. Alright so now the bath water is up to this level. We can now run our first bead of silicone along here. Then you need about of these, use as much as you can. And, as ever, invest in a nice little former. This has got loads of different little angles on it and stuff like that. I don’t know which one I’m gonna go for today but I’m gonna go for one of them obviously. We’ll see how we go, and just smooth it off, use this to rub off all the time. Just take your time, smoothing it off, okay? So as you can see I’m left with a smaller sort of other bead, so I usually like to select a slightly larger former, and just clean that all up. Just go and run along doing that. Til everything’s done. Alright so once you’re done with that you’ve smoothed everything out. We’ve got a beautiful nice seal around there now and after about hours of curing, the shower should be safe to use.
    I hope you’ve enjoyed today’s plumberparts.co.uk video and that you especially got that tip about filling up the bath half full before you do any siliconing. Because that is really really important. If you have any more questions or you need any more help or you think we’ve missed anything out, as ever, tell us on this video or you can tweet us, facebook us, or go to our website at plumberparts.co.uk As ever, follow us on twitter and facebook and subscribe to our videos. Hold tight! – Plumberparts.co.uk Honest reviews and advice.



    Bean “B” Connectors combine reliable connectivity with perfect fit. Made to securely splice solid copper wire, these connectors position wire for a single, easy crimp. Internally this connector is gel filled which provides a moister barrier. B Connectors are extremely handy, inexpensive, cost-effective, and they won’t corrode over time.

    Features:

    Insulation piercing internal teeth, soft brass (easy to squeeze) crimp
    Durable protective outer covering
    Suitable for 19-26 awg solid copper wire
    Gel Filled

    For more information please visit http://www.showmecables.com https://www.showmecables.com/blog

    Related Products

    WhatsApp Online Chat !