Original Factory SV-777 silicone sealant for stone Wholesale to Macedonia

Original Factory SV-777 silicone sealant for stone Wholesale to Macedonia
  • Original Factory SV-777 silicone sealant for stone Wholesale to MacedoniaOriginal Factory SV-777 silicone sealant for stone Wholesale to Macedonia
  • Original Factory SV-777 silicone sealant for stone Wholesale to MacedoniaOriginal Factory SV-777 silicone sealant for stone Wholesale to Macedonia
  • Original Factory SV-777 silicone sealant for stone Wholesale to MacedoniaOriginal Factory SV-777 silicone sealant for stone Wholesale to Macedonia

Short Description:

Description SV-777 silicone sealant for stone, is an elastomer sealant in modulus, single. Waterproof joints need to be sensitive to natural stone, glass and metal building clean appearance panel for sealing design, it to the moisture in the air after curing in contact, the formation of elastic rubber sealing performance, durability, weather resistance, good combination with most building materials.   Key Features 1. 100% silicone 2. Minimized fluid migration 3. Low dirt pick up 4. Water &...


Product Detail

Attentions

Application

Product Tags

We offer great strength in quality and development,merchandising,sales and marketing and operation for Original Factory SV-777 silicone sealant for stone Wholesale to Macedonia, We warmly welcome your participation based on mutual benefits in the near future.


Description

SV-777 silicone sealant for stone, is an elastomer sealant in modulus, single. Waterproof joints need to be sensitive to natural stone, glass and metal building clean appearance panel for sealing design, it to the moisture in the air after curing in contact, the formation of elastic rubber sealing performance, durability, weather resistance, good combination with most building materials.

 

Key Features

1. 100% silicone

2. Minimized fluid migration

3. Low dirt pick up

4. Water & weatherproof

5. Primerless adhesion to most building materials

6. 25% movement capability

 

Basic Application

1.Stone curtain wall sealing

2.Engineering ceramic sealing

3.Stone and other materials such as glass, metal seam sealing

4.Other uses

 

Technical data sheet

Test standard Test project Unit value
Before curing——25℃,50%R.H.
ASTM C 679 Flow, sagging or vertical flow mm 0
  VOC g/L <80
GB13477 surface drying time(25℃,50%R.H.) min 30
  Curing time(25℃,50%R.H.) Day 7-14
Sealant curing speed and operating time will have different with different temperatures and temperature, high temperature and high humidity can make sealant curing speed faster, rather low temperature and low humidity are slower.21 days after curing——25℃,50%R.H.
GB13477 Durometer Hardness Shore A 30
GB13477 The ultimate tensile strength Mpa 0.7
  Temperature stability -50~+150
GB13477 Movement capability % 25
ASTM C 1248 Pollution / oil, natural stone   No

 

Certification

25HM GB/T 23261-2009;ASTM C920-2011

 

Color

Black,White,Gray

 

Package

300ml in cartridge * 24 per box, 590ml in sausage *20 per box

 

Shelf life

12 months

 

Note

If you want the TDS or MSDS or other details, please contact with our sales person.

  • Previous:
  • Next:



  • In this video I show how I made my colourful DIY Silicone Wedding Rings. There are loads of reasons why people want to wear a silicone ring over a metal one, if you work with your hands or do lots of sport for example. For full written instructions head over to my instructables page.

    https://www.instructables.com/id/Colourful-Silicone-Wedding-Rings/



    The heterojunction technology combines the advantages of crystalline silicon solar cells and thin film technologies enabling solar cell to reach higher degrees of efficiency at a lower cost of production.

    This movie shows you the process of manufacturing solar cells with heterojunction technology:

    Texturing
    For high efficiency HJT cells, damages from cutting have to be completely removed and a special texture created by wet chemical processes. The wafers are also put through a special cleaning process.

    PECVD Coating
    The surface of the cell is passivated in order to prevent energy loss within the cell. The intrinsic and amorphous silicon layers are separated without cross-contamination, thus achieving passivation with a high longevity.

    PVD Coating
    A sputter process is used to apply a TCO layer to the front and back of the wafer which serves as an antireflection layer.

    Printing
    Screen printing is used to print the contacts on the front and back sides of wafers with silver paste.

    Curing
    Curing printed HJT cells is a simple thermal process in order to outgas the solvents within the low temperature paste.

    Testing & Sorting
    Meyer Burger offers leading measurement procedures for the precise testing of high capacitance HJT cells which require a measurement speed of 400–600 ms.

    Related Products

    WhatsApp Online Chat !