Online Exporter SV-8000 PU Sealant for Insulating Glass to Norwegian Manufacturers
Short Description:
Description SV – 8000 two-component polyurethane insulating glass sealant is a neutral cure, mainly used for the insulating glass of the second seal. Product formulation to use its performance with high modulus, high strength, to meet the requirements of insulating glass assembly. Where to use It is a two-component PU sealant that offers variable work life with high bonding strength to maintain the integrity of insulating glass unit, suits both commercial and residential IGU. Key Fe...
"Sincerity, Innovation, Rigorousness, and Efficiency" is the persistent conception of our company for the long-term to develop together with customers for mutual reciprocity and mutual benefit for Online Exporter SV-8000 PU Sealant for Insulating Glass to Norwegian Manufacturers, If you have any comments about our company or products, please feel free to contact us, your coming mail will be highly appreciated.
Description
SV – 8000 two-component polyurethane insulating glass sealant is a neutral cure, mainly used for the insulating glass of the second seal. Product formulation to use its performance with high modulus, high strength, to meet the requirements of insulating glass assembly.
Where to use
It is a two-component PU sealant that offers variable work life with high bonding strength to maintain the integrity of insulating glass unit, suits both commercial and residential IGU.
Key Features
1. High Modulus
2. UV resistance
3. Low vapor and gas transmission
4. Primerless adhesion to coated glass
Technical data sheet
| Test project | standards | Value |
| Sagging degree (mm) | ≤3 | 0 |
| Operating time | ≥30 | 30 |
| Thermal weight loss(%) | ≤10 | 2 |
| Durometer Hardness Shore A | 20-80 | 42 |
| tensile propcrties（MPA） | ＞0.4 | 1.0 |
| Bond damage area（5%） | ≤5 | 0 |
Certification
GB-24266-2009;
Color
Component A(Base) – White, Component B(Catalyst)- Black
Package
1. Component A(Base): (190L), Component B(Catalyst) (18.5L)
2. Component A(Base):24.5kg (18L), Component B(Catalyst): 1.9kg (1.8L)
Shelf life
12 months
Note
If you want the TDS or MSDS or other details, please contact with our sales person.
O-Lube Information: https://ph.parker.com/us/27601/en/general-purpose-barium-grease-lubricant-hydrocarbon-service-and-pneumatic-systems-under-200-psi-translucent-o-lube
Super O-Lube Information: https://ph.parker.com/us/27601/en/high-viscosity-silicone-lubricant-general-purpose-and-high-pressure-pneumatic-translucent-super-o-lube
Today we’re going to talk about lubrication of O-rings. Lubrication of O-rings is extremely important. The greatest benefit of using a lubricant is typically obtained during installation. Using a lubricant is going to decrease the surface friction of the O-ring helping to prevent abrasion, pinching or cutting of the O-ring during installation. Lubricating an O-ring can also help to seat the O-ring properly into the application, as well as aid and speed up automated assembly processes. The proper method of applying a lubricant to an O-ring always seems to be an area of concern for many of our customers and there are many methods used in the marketplace. One is to apply the lubricant to the O-ring using your fingers, your hand or a brush. Another is to dip the O-ring into a container of the lubricant. A third method commonly used is to dispense the O-ring lubricant into the seal packaging and use what we call the “shake and bake” method. The common goal of all of these different lubrication methods is to have a thin uniform film applied to the entire surface of the O-ring when completed. This will ease installation and provide best friction reduction.
Parker offers the o-lube and super o-lube as well as many other surface treatments to aid in installation. Please visit www.parkerorings.com for more information on these products.
