OEM/ODM Supplier for SV-312 Polyurethane Sealant for Windshield Glazing for Serbia Factory

OEM/ODM Supplier for
 SV-312 Polyurethane Sealant for Windshield Glazing for Serbia Factory
  • OEM/ODM Supplier for
 SV-312 Polyurethane Sealant for Windshield Glazing for Serbia FactoryOEM/ODM Supplier for
 SV-312 Polyurethane Sealant for Windshield Glazing for Serbia Factory
  • OEM/ODM Supplier for
 SV-312 Polyurethane Sealant for Windshield Glazing for Serbia FactoryOEM/ODM Supplier for
 SV-312 Polyurethane Sealant for Windshield Glazing for Serbia Factory

Short Description:

Description SV-312  is an isocyanate-free, high modulus,non conductive, thixotropic, single component modified polyurethane adhesive, which polymerizes rapidly under the effect of atmospheric moisture. It has been specially designed for bonding of fixed glass in automotive repair. It allows a drive away time of 6 hours in vehicles with or without airbag. *Providing the ambient temperature is at least 23°C and relative humidity 50 %. At lower temperatures and humidities drive away time will be...


Product Detail

Attentions

Application

Product Tags

We insist on offering high quality production with good business concept, honest sales and the best and fast service. it will bring you not only the high quality product and huge profit, but the most significant is to occupy the endless market for OEM/ODM Supplier for SV-312 Polyurethane Sealant for Windshield Glazing for Serbia Factory, We have confident that we can provide the high quality products at resonable price, good after-sales service to the customers. And we will create a bright future.


Description

SV-312  is an isocyanate-free, high modulus,non conductive, thixotropic, single component modified polyurethane adhesive, which polymerizes rapidly under the effect of atmospheric moisture. It has been specially designed for bonding of fixed glass in automotive repair.

It allows a drive away time of 6 hours in vehicles with or without airbag.

*Providing the ambient temperature is at least 23°C and relative humidity 50 %.

At lower temperatures and humidities drive away time will be longer.

 

Where to use

Bonding and sealing for windshield glass, glass fiber reinforced plastic fittings, steel and aluminum board of automobiles.

 

Key Features

a. Fast curing under room temperature, no sagging, solvent free

b. High bonding strength, 

c. Good chemical and water resistance

d. No conductive

e. Excellent noise, vibration and impaction resistance

f. Automotive OEM quality

Technical data sheet
Test standard Test project Unit value
GB13477 Flow, sagging or vertical flow mm 0
GB13477 surface drying time(25℃,50%R.H.) min 30
  Curing speed mm/24h 3
GB/T 531.1-2008 Durometer Hardness Shore A 45
GB/T 2793 Non-volatile components % ≥96
GB/T 528 The tensile strength Mpa 2.5Mpa
GB/T 528 Elongation at break % ≥400%
GB/T 528 Tear strength N/mm ≥5.0

Color

White, black, grey

 

Package

300ml plastic cartridges and 600ml in sausage

 

Shelf life

9 months 

 

Note

If you want the TDS or MSDS or other details, please contact with our sales person.

  • Previous:
  • Next:



  • How to load a sausage gun for caulking/sealants and how to configure it to dispense 10oz cartridges.

    Subscribe to our channel where we will be uploading new videos weekly & answering your questions.

    How to load your sausage gun:

    • Remove the end cap, noting the white sausage-only cup
    • Grab the back handle, press the thumb-release, and draw the rod back
    • Insert the sausage pack into the barrel
    • Using the trigger, bring the sausage pack up to the front
    • Cut one or multiple openings at the end of the sausage pack
    • Cut the end of the cone to the desired width and angle of the bead you want to dispense
    • Place the cone back on the gun and put the end cap back on

    How to configure your sausage gun to dispense 10oz cartridges

    • Remove the end cap and the barrel
    • Loosen the set screws on the white sausage-only cup and remove the cup
    • Put the barrel back on
    • Draw the rod back and insert the cartridge
    • Replace the end cap and set the rod in place to the back of the cartridge.
    • Cut the end of the cartridge to the desired width and angle of the bead you wish to dispense



    Jin Weitai Rubber & Plastic Co., Ltd is a professional company that integrates the R&D, production, and sales together. Main products including silicone keypad, P+R keypad, audio accessories, and other precision rubber & plastic parts.

    Established in December 2010, The total investment of company is over 8 million (RMB). It has plant area of 5000 square meters and more than 100 employees.

    Welcome to contact us at tonychou@jwtxs.com or call +86 18046216971

    Related Products

    WhatsApp Online Chat !