OEM Supplier for Siway SV-602 Epoxy Structural Adhesive A/B Wholesale to Mauritius

OEM Supplier for
 Siway SV-602 Epoxy Structural Adhesive A/B Wholesale to Mauritius
  • OEM Supplier for
 Siway SV-602 Epoxy Structural Adhesive A/B Wholesale to MauritiusOEM Supplier for
 Siway SV-602 Epoxy Structural Adhesive A/B Wholesale to Mauritius

Short Description:

Description SV-602 is a 2-part structural epoxy adhesive developed for such application as dry fixing cladding. It has strong adhesion to metals, woods, reinforced plastics stone, ceramic and masonry. It is the best choice for bonding parts which must withstand weather, moisture and temperature fluctuations. SV-602 will adhere with minimum surface preparation and has a low coefficient of expansion.   Key Features 1. Room temperature curing Epoxy adhesive 2. Fast cure at room temperature,...


Product Detail

Attentions

Application

Product Tags

Our development depends on the advanced equipment ,excellent talents and continuously strengthened technology forces for OEM Supplier for Siway SV-602 Epoxy Structural Adhesive A/B Wholesale to Mauritius, We are sincerely looking forward to establishing good cooperative relationships with customers from at home and abroad for creating a bright future together.


Description

SV-602 is a 2-part structural epoxy adhesive developed for such application as dry fixing cladding. It has strong adhesion to metals, woods, reinforced plastics stone, ceramic and masonry. It is the best choice for bonding parts which must withstand weather, moisture and temperature fluctuations. SV-602 will adhere with minimum surface preparation and has a low coefficient of expansion.

 

Key Features

1. Room temperature curing Epoxy adhesive

2. Fast cure at room temperature, <40 min for reaching a tack-free status under standard environment (STD: 23℃, 50% humidity)

3. Mix ratio of 1:1 by volume or by weight

4. Good mechanical property

5. Bonds a wide variety of building materials

6. Good waterproofing and chemical resistance

 

Basic Application

1, the external walls of stone material, ceramic and other hang bond;

2, concrete, ceramics, stone, wood and other prefabricated split, bonding and jointing;

3, concrete, stone and so on crack repair;

4, the structure of the localization, anchor, reinforcement and reinforcement.

 

Technical data sheet

The following data is for reference only and is not recommended for the specification

Shear strength Stainless steel-stainless steel/Standard conditions ≥18   JC887-2001
Pressure shear strength Stone-stone/ Standard conditions ≥12
Stone-stone/ The freeze-thaw cycle 50 times ≥10
Stone – stainless steel/ Standard conditions ≥12
Standard conditions:Temperature=23℃,relative humidity=50%,48 hours curing
attribute SV-602-A SV-602-B SV-602(After mixing)
Colour gray white grey
Density(g/cm³) 1.8 1.8 1.8
Viscosity(PaS) 200-400 150-250  
Effective operating time(23℃) N/A N/A 20min
           

 

Certification

JC 887-2001

 

Color

Part A-Grey Paste/Part B-White Paste

 

Package

9kg/9kg per unit and 15kg/15kg per unit

 

Shelf life

12 months

 

Note

If you want the TDS or MSDS or other details, please contact with our sales person.

  • Previous:
  • Next:



  • Buy Axle Bearings here https://www.amazon.com/gp/product/B008OIG4FK/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B008OIG4FK&linkCode=as2&tag=bullshitkor01-20&linkId=QOQYT6UIALXYDBN5
    Need a Slide hammer https://www.amazon.com/gp/product/B000I8R7EQ/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B000I8R7EQ&linkCode=as2&tag=bullshitkor01-20&linkId=TQ3NFVWPOFHTRSY7
    Get the Bearing and Seal Driver Here https://amzn.to/1ZyDtIm
    I’ve seen some people go though all the trouble of removing the axles to replace a seal but I figure if you’ve gone that far for the price of a bearing you may as well toss a new one in with it.
    one way to tell if your axle seal is leaking is oil coming from the drums when the drum is removed you will seal oil leaking around the seal. Using a axle bearing remover and a slide hammer that bearing will come out in a matter of seconds. if you have a bad axle bearing you should be able to hear some rear end noise while driving. anyways it’s beer time

    https://twitter.com/bullshitkorner

    https://www.facebook.com/pages/Bullshitkorner/415124691917952



    Our silicone coating technology permits MTi to coat silicones onto direct-coated papers like SCK and CCK, or polycoated paper, PET, TPO, polyolefin, and non-woven substrates at high coating speeds and with extremely low extractables. We are capable of attaining extractable levels less then 1% on PP and PE films. This cure level is advanced for thermal silicone systems.

    These low extractables allow our customer’s adhesives to perform their jobs without negative influences from migrating silicone. Using MTI’s highly-engineered release products, customers have achieved increases in tack levels with their standard adhesives. In some instances performance improvements of up to 33% were realized without any change to the psa chemistry.

    Superior release performance
    MTi’s technicians are experts at designing silicone chemistries for protecting and releasing all manner of pressure sensitive adhesives and mastic compounds at very high temperatures. This is especially important for roofing, building, and construction applications.

    MTiPolyexe products are designed to meet and exceed even the most stringent specifications, maximizing operating efficiencies in your plant. Key characteristics like high temperature resistance, dimensional integrity/flatness, and caliper control, will result in measurable improvements in your manufacturing operations.

    Release Liner Coating Highlights
    Silicone coating for film, paper, and poly coated paper
    Release chemistries for all pressure-sensitive adhesives and mastics
    Extremely low extractible silicone systems

    Related Products

    WhatsApp Online Chat !