OEM Supplier for Siway PU FOAM Wholesale to Japan

OEM Supplier for Siway PU FOAM Wholesale to Japan
  • OEM Supplier for Siway PU FOAM Wholesale to JapanOEM Supplier for Siway PU FOAM Wholesale to Japan
  • OEM Supplier for Siway PU FOAM Wholesale to JapanOEM Supplier for Siway PU FOAM Wholesale to Japan
  • OEM Supplier for Siway PU FOAM Wholesale to JapanOEM Supplier for Siway PU FOAM Wholesale to Japan

Short Description:

Description This product is the expansion, moisture curing, has the strong cohesiveness, elastic foam obturator structure; Save work to save time, reduce waste; High bond strength; Bubble can stick in the concrete, wood, metal, plastic, such as base material surface, but not including teflon, silicon resins;   Key Features 1. Noise silencing effect 2. Strong bonding strength 3. Water & weatherproof 4. Primerless adhesion to most building materials   Basic Application 1.Doors and Windows a...


Product Detail

Attentions

Application

Product Tags

Assume full responsibility to meet all demands of our clients; achieve continuous advancements by promoting the growth of our clients; become the final permanent cooperative partner of clients and maximize the interests of clients for OEM Supplier for Siway PU FOAM Wholesale to Japan, If you are interested in any of our products or would like to discuss a customized order, please feel free to contact us.


Description

This product is the expansion, moisture curing, has the strong cohesiveness, elastic foam obturator structure; Save work to save time, reduce waste; High bond strength;

Bubble can stick in the concrete, wood, metal, plastic, such as base material surface, but not including teflon, silicon resins;

 

Key Features

1. Noise silencing effect

2. Strong bonding strength

3. Water & weatherproof

4. Primerless adhesion to most building materials

 

Basic Application

1.Doors and Windows and wall body between the gap filling sealing, fixed bond

2.Language lab, studio, etc when decorating, gap to fill

 

Technical data sheet

Project

Value

Density, Kg/m³,Not less

10

Thermal conductivity,35℃,W/(m·K) no more than

0.050

Dimensional stability(23±2)℃,48,h no more than

5

Operating temperature

-10~+35℃

Optimum operating temperature

+18~+25℃

Temperature range(After curing)

-35~+80℃

Tensile bond strength

kPa

Not less

Aluminum plate

Standard condition,7d

80

Immersion,7d

60

PVC plate

Standard condition,7d

80

Immersion,7d

60

Cement Plate

Standard condition,7d

60

Shear strength,kpa,Not less

80

Foam expansion ratio,Not less

Standard value-10

 

Certification

JC 936-2004

 

Color

White

 

Package

750ml in Bottle * 12 per box

 

Shelf life

12 months

 

Note

If you want the TDS or MSDS or other details, please contact with our sales person.

  • Previous:
  • Next:



  • Sometime during the last couple weeks of our winter snowbird travels the Keystone Cougar’s built in black tank flushing system gave up the ghost. I hook up the hose to the sewer flush inlet connection, turn on the water, and nothing happens. Something must be plugged.

    I tried a thorough cleaning of the back tank using several different treatment chemicals. I also picked up a through the toilet type flushing wand. No luck, the built in tank flush was still broken. It was time to get a bit dirty and take apart the system and see what the problem was.

    My system is called a No Fuss Flush. I was able to find a diagram for it online. After perusing the No Fuss Flush diagram, the fault looked to be one of three things. A clogged plumbing pipe, a defective or plugged check valve or a stopped up flushing nozzle.

    I found the check valve located under our bathroom sink and could see the water was reaching it. Next, I unscrewed the valve and took it to a tap to test it out. Everything appeared to be in working order. The valve mechanics functioned as they should, and it passed water.

    So, it seemed the likely culprit was the flusher’s output nozzle mounted inside the tank.  I followed the plumbing pipe into an area of the underbelly on the passenger side of the trailer. After cutting a small access flap into the corrugated plastic, I  finally found the nozzle. It’s mounted on the black waste tank with three screws and a large glob of silicone sealant.

    Once I removed the nozzle, the problem was obvious. All the nozzle spray holes were plugged up with hardened dark deposits of who knows what. I let the nozzle soak for a while in some hot soapy water and was able to clean it up. Next, I reamed out each hole with a 1/16 bit to make sure they were entirely clear.

    I then removed all the old silicone and reinstalled the nozzle with new 3M clear marine grade silicone. Once everything was dry, and the silicone hardened I gave the tank flusher a test. Woohoo! I was back in business.

    RV Products I use and recommend – https://www.loveyourrv.com/love-rv-recommended-products-page/
    ———————————–
    Follow our RVing adventures at https://www.loveyourrv.com and https://rvhappyhour.com

    Connect with Love Your RV!

    Pinterest ► https://www.pinterest.com/loveyourrv
    Google+ ► https://plus.google.com/+LoveYourRVonGPLUS
    Facebook ► https://www.facebook.com/LoveYourRV
    Twitter ► https://twitter.com/loveyourrv
    Blog Feed ► https://feeds.feedburner.com/LoveYourRV
    Monthly Newsletter ► https://www.loveyourrv.com/mailing-list-sign-up/

    Don’t forget to Subscribe! ► https://www.youtube.com/subscription_center?add_user=LoveYourRV

    Related Products

    WhatsApp Online Chat !