OEM manufacturer custom Siway SV-602 Epoxy Structural Adhesive A/B Supply to Detroit

OEM manufacturer custom
 Siway SV-602 Epoxy Structural Adhesive A/B Supply to Detroit
  • OEM manufacturer custom
 Siway SV-602 Epoxy Structural Adhesive A/B Supply to DetroitOEM manufacturer custom
 Siway SV-602 Epoxy Structural Adhesive A/B Supply to Detroit

Short Description:

Description SV-602 is a 2-part structural epoxy adhesive developed for such application as dry fixing cladding. It has strong adhesion to metals, woods, reinforced plastics stone, ceramic and masonry. It is the best choice for bonding parts which must withstand weather, moisture and temperature fluctuations. SV-602 will adhere with minimum surface preparation and has a low coefficient of expansion.   Key Features 1. Room temperature curing Epoxy adhesive 2. Fast cure at room temperature,...


Product Detail

Attentions

Application

Product Tags

With advanced technologies and facilities, strict quality control, reasonable price, superior service and close co-operation with customers, we are devoted to providing the best value for our customers for OEM manufacturer custom Siway SV-602 Epoxy Structural Adhesive A/B Supply to Detroit, We have confident that we can provide the high quality products at resonable price, good after-sales service to the customers. And we will create a bright future.


Description

SV-602 is a 2-part structural epoxy adhesive developed for such application as dry fixing cladding. It has strong adhesion to metals, woods, reinforced plastics stone, ceramic and masonry. It is the best choice for bonding parts which must withstand weather, moisture and temperature fluctuations. SV-602 will adhere with minimum surface preparation and has a low coefficient of expansion.

 

Key Features

1. Room temperature curing Epoxy adhesive

2. Fast cure at room temperature, <40 min for reaching a tack-free status under standard environment (STD: 23℃, 50% humidity)

3. Mix ratio of 1:1 by volume or by weight

4. Good mechanical property

5. Bonds a wide variety of building materials

6. Good waterproofing and chemical resistance

 

Basic Application

1, the external walls of stone material, ceramic and other hang bond;

2, concrete, ceramics, stone, wood and other prefabricated split, bonding and jointing;

3, concrete, stone and so on crack repair;

4, the structure of the localization, anchor, reinforcement and reinforcement.

 

Technical data sheet

The following data is for reference only and is not recommended for the specification

Shear strength Stainless steel-stainless steel/Standard conditions ≥18   JC887-2001
Pressure shear strength Stone-stone/ Standard conditions ≥12
Stone-stone/ The freeze-thaw cycle 50 times ≥10
Stone – stainless steel/ Standard conditions ≥12
Standard conditions:Temperature=23℃,relative humidity=50%,48 hours curing
attribute SV-602-A SV-602-B SV-602(After mixing)
Colour gray white grey
Density(g/cm³) 1.8 1.8 1.8
Viscosity(PaS) 200-400 150-250  
Effective operating time(23℃) N/A N/A 20min
           

 

Certification

JC 887-2001

 

Color

Part A-Grey Paste/Part B-White Paste

 

Package

9kg/9kg per unit and 15kg/15kg per unit

 

Shelf life

12 months

 

Note

If you want the TDS or MSDS or other details, please contact with our sales person.

  • Previous:
  • Next:



  • Jeep Liberty Water Pump Replace. This is a 2003 Jeep Liberty Sport with a 3.7 engine , that has a bad water pump.The serpentine belt was already taken off the jeep liberty so we could load the jeep up on the trailer. You will need to drain the rest of the jeeps antifreeze out and you can either take the bottom radiator hose off to drain . There may be a drain plug in the jeep liberty radiator but i did not look, the hose was right there.To get the water pump off the jeep liberty you will need to remove the idler pulley.. Then the water pump can be removed from the jeep liberty ,by removing the bolts from the water pump. the 3.7 jeep liberty water pump is not to hard to do compared to many other vehicles. Clean the surface that the water pump will seal on the 3.7 block. Then just reverse the steps to reinstall the water pump on the 3.7 jeep liberty.
    Due to G+ Allowing links to be posted and I do not have time to make sure all links are safe ,ANY post with a link in it will be deleted. Sorry. .
    car repair



    MotorWeek’s Pat Goss (RockAuto.com is a MotorWeek Sponsor) shows what to avoid when removing old gaskets from aluminum cylinder heads and other aluminum car parts.

    Related Products

    WhatsApp Online Chat !