OEM manufacturer custom Siway MG PU FOAM to America Manufacturer

We believe in: Innovation is our soul and spirit. Quality is our life. Customer need is our God for OEM manufacturer custom Siway MG PU FOAM to America Manufacturer, We are always looking forward to forming successful business relationships with new clients around the world.

Description

MG PU FOAM is the expansion, moisture curing, has the strong cohesiveness, elastic foam obturator structure; Save work to save time, reduce waste; High bond strength;

Bubble can stick in the concrete, wood, metal, plastic, such as base material surface, but not including teflon, silicon resins;

Key Features

1. Noise silencing effect

2. Strong bonding strength

3. Water & weatherproof

4. Primerless adhesion to most building materials

Basic Application

1.Doors and Windows and wall body between the gap filling sealing, fixed bond

2.Language lab, studio, etc when decorating, gap to fill

Technical data sheet

Certification

JC 936-2004

Color

White

Package

750ml in Bottle * 12 per box

Shelf life

12 months

Note

If you want the TDS or MSDS or other details, please contact with our sales person.

How to Create a Solar Panel Water Heater
00:00:28 Steps
00:00:33 1 – Get a double-glazed unit for the sunlight to pass through
00:00:59 2 – Get a single-panel room radiator that is slightly smaller than the glass unit
00:01:20 3 – Build a strong wooden box to fit the double-glazed unit
00:01:59 4 – If the box will sit on a flat surface build a support so that the box can be installed perpendicular to the sun
00:02:20 5 – Treat the outside of the box to make the wood water resistant
00:02:31 6 – Glue aluminum kitchen foil to the plywood inside the box
00:02:42 7 – Screw two radiator brackets inside the box to support the radiator
00:02:54 8 – Insert a layer of 50mm thermal insulation slabs over the kitchen foil
00:03:07 9 – Fit the radiator onto the brackets and drill 20mm holes in the side of the box where the pipes will come out
00:03:31 10 – Plumb in the radiator so that two pieces of 15mm copper tube extends 100mm from the outside of the box
00:03:55 11 – Spray the front of the radiator matt black using heat resistant paint, such as that used for spraying the radiant parts of coal and gas fires
00:04:11 12 – Screw two angle brackets onto the bottom edge of the box and bend them up to stop the glass sliding off the box
00:04:25 13 – Run a bead of silicone sealant around the edge of the box and place lengths of electrical tape over the bead so the glass doesn’t stick to it
00:04:41 14 – Place the glass on the box and leave the silicon to set
00:05:00 15 – Screw L section UPVC strips to the three sides where the glass is flush with the box to prevent rain ingress
00:05:22 16 – Get rubber engine hose with an internal diameter of 15mm from a car parts shop and attach it to the 15mm copper tube with jubilee clips
00:05:49 17 – Finished

Content taken from WikiHow https://www.wikihow.com/Create-a-Solar-Panel-Water-Heater