OEM Customized wholesale Siway SV-602 Epoxy Structural Adhesive A/B for Milan Factories

OEM Customized wholesale
 Siway SV-602 Epoxy Structural Adhesive A/B for Milan Factories
  • OEM Customized wholesale
 Siway SV-602 Epoxy Structural Adhesive A/B for Milan FactoriesOEM Customized wholesale
 Siway SV-602 Epoxy Structural Adhesive A/B for Milan Factories

Short Description:

Description SV-602 is a 2-part structural epoxy adhesive developed for such application as dry fixing cladding. It has strong adhesion to metals, woods, reinforced plastics stone, ceramic and masonry. It is the best choice for bonding parts which must withstand weather, moisture and temperature fluctuations. SV-602 will adhere with minimum surface preparation and has a low coefficient of expansion.   Key Features 1. Room temperature curing Epoxy adhesive 2. Fast cure at room temperature,...


Product Detail

Attentions

Application

Product Tags

We support our buyers with ideal high quality products and high level service. Becoming the specialist manufacturer in this sector, we have gained rich practical experience in producing and managing for OEM Customized wholesale Siway SV-602 Epoxy Structural Adhesive A/B for Milan Factories, We look forward to establish a long-term business relationship with your esteem co-operation.


Description

SV-602 is a 2-part structural epoxy adhesive developed for such application as dry fixing cladding. It has strong adhesion to metals, woods, reinforced plastics stone, ceramic and masonry. It is the best choice for bonding parts which must withstand weather, moisture and temperature fluctuations. SV-602 will adhere with minimum surface preparation and has a low coefficient of expansion.

 

Key Features

1. Room temperature curing Epoxy adhesive

2. Fast cure at room temperature, <40 min for reaching a tack-free status under standard environment (STD: 23℃, 50% humidity)

3. Mix ratio of 1:1 by volume or by weight

4. Good mechanical property

5. Bonds a wide variety of building materials

6. Good waterproofing and chemical resistance

 

Basic Application

1, the external walls of stone material, ceramic and other hang bond;

2, concrete, ceramics, stone, wood and other prefabricated split, bonding and jointing;

3, concrete, stone and so on crack repair;

4, the structure of the localization, anchor, reinforcement and reinforcement.

 

Technical data sheet

The following data is for reference only and is not recommended for the specification

Shear strength Stainless steel-stainless steel/Standard conditions ≥18   JC887-2001
Pressure shear strength Stone-stone/ Standard conditions ≥12
Stone-stone/ The freeze-thaw cycle 50 times ≥10
Stone – stainless steel/ Standard conditions ≥12
Standard conditions:Temperature=23℃,relative humidity=50%,48 hours curing
attribute SV-602-A SV-602-B SV-602(After mixing)
Colour gray white grey
Density(g/cm³) 1.8 1.8 1.8
Viscosity(PaS) 200-400 150-250  
Effective operating time(23℃) N/A N/A 20min
           

 

Certification

JC 887-2001

 

Color

Part A-Grey Paste/Part B-White Paste

 

Package

9kg/9kg per unit and 15kg/15kg per unit

 

Shelf life

12 months

 

Note

If you want the TDS or MSDS or other details, please contact with our sales person.

  • Previous:
  • Next:



  • This is a basic overview and water repellency test for both Meguiar’s Ultimate Quik Wax and Ultimate Quik Detailer. The hood was prepped using M205, followed by an IPA wipedown prior to application. On the left side hood facing the car I applied Ultimate Quik Detailer(UQD), the right side hood has Ultimate Quik Wax(UQW). This is a water test after a 24 hour period of waiting.

    These products are very versatile and I enjoy using them. You can use both as a drying aid, mist onto the paint after a wash and rinse in order to help get water off and retain it into your drying towel more effectively. UQD is the type of product I would recommend if you determine that the car is not quite dirty enough for a full wash, but you want to give it a nice wipedown or dusting off, use it like this at your discretion. I would also recommend UQD for emergency bird bomb removal which in some cases can cause almost immediate etching if in a hot environment, UQD should get the job done safely. And UQW I would recommend for that booster wax after washes when the car is fully washed and dried off. Meguiar’s Ultimate Quik Wax has more durable polymers which will leave you with better protection compared to Ultimate Quik Detailer.

    Also, these are extremely easy to work with. They are both spray on wipe down products, they don’t take any time to work into the paint, they flash quickly and you’re then ready to move onto the next spot without worrying about smearing. It does not take much to get the job done, I usually use one or two sprays to do half a hood on a car like this, you do not have to over apply them for them to be effective.

    They also smell great, which is always a plus!

    Check out my other videos as well for more water tests and product reviews!

    Meguiar’s Paint Protect: https://youtu.be/a3bi0EASbiE
    Meguiar’s Ultimate Paste Wax & Turtle Wax ICE Paste Wax: https://youtu.be/m_t2KXIhgzs
    Turtle Wax ICE Spray Wax & ICE Spray Detailer (2015): https://youtu.be/6aUnCkaxVI8
    Turtle Wax ICE Liquid Wax (2015): https://youtu.be/VT60wBWbIiA
    Turtle Wax ICE Shine Lock Sealant: https://youtu.be/2-KPi804MjM
    Turtle Wax ICE Liquid Wax & Meguiar’s NXT Tech Wax 2.0: https://youtu.be/XQcCtmAbNOU
    Turtle Wax ICE Paste Wax (2015) & Super Hard Shell Paste Wax: https://youtu.be/ZKZpGkPZl4s
    Turtle Wax ICE Paste Polish (2007) & Corrosion Technologies RejeX Paint Sealant: https://youtu.be/X2tr38-y5aE?list=UURjVlo1D9eSs9QWXlIPL5eg



    Read more: https://3dprintingindustry.com/2014/10/15/picsima-3d-print-silicones-without-support-structures/

    Video transcript: Fripp Design and Research has released a YouTube video teasing their new 3D printing Picsima technology capable of printing medical and food grade parts using linked polymers like silicone, epoxy resin and acrylics without the need for support structures.

    The Picsima process uses commercially available silicone products, which means that they have already been cleared by the FDA for food and medical applications. The process solidifies the materials with a patent pending process that controls the polymerisation of the silicone. The comapny has already created parts as thin as 400 microns with a shore hardness of 10A. For comparison, Stratasys’ flexible Tango Black material has a shore hardness of 27A.

    The company’s long term goal is to create a commercial 3D printer using the Picsima technology and the team is currently working on the product design and raising the required capital. However, currently the machines in the Fripp Design factory are the only 3D printers capable of using this new process and with these they are offering silicone 3D printing services in the interim.

    The process will have many medical applications as well as uses for 3D printing custom gaskets and seals. Typically these parts would be 3D printed in a flexible material to test the shape and fit and then have a mold cast so they could be reproduced in silicone. Because the Picsima process does not require support structures, it can completely eliminate that step and print functional end-use parts.

    You can check out the video on youtube.

    Related Products

    WhatsApp Online Chat !