Newly Arrival Siway MG PU FOAM for French Manufacturer
Short Description:
Description MG PU FOAM is the expansion, moisture curing, has the strong cohesiveness, elastic foam obturator structure; Save work to save time, reduce waste; High bond strength; Bubble can stick in the concrete, wood, metal, plastic, such as base material surface, but not including teflon, silicon resins; Key Features 1. Noise silencing effect 2. Strong bonding strength 3. Water & weatherproof 4. Primerless adhesion to most building materials Basic Application 1.Doors and Windows and...
To create more value for customers is our business philosophy; customer growing is our working chase for Newly Arrival Siway MG PU FOAM for French Manufacturer, We welcome new and old customers from all walks of life to contact us for future business relationships and achieving mutual success!
Description
MG PU FOAM is the expansion, moisture curing, has the strong cohesiveness, elastic foam obturator structure; Save work to save time, reduce waste; High bond strength;
Bubble can stick in the concrete, wood, metal, plastic, such as base material surface, but not including teflon, silicon resins;
Key Features
1. Noise silencing effect
2. Strong bonding strength
3. Water & weatherproof
4. Primerless adhesion to most building materials
Basic Application
1.Doors and Windows and wall body between the gap filling sealing, fixed bond
2.Language lab, studio, etc when decorating, gap to fill
Technical data sheet
|
Project |
Value |
||
|
Density, Kg/m³，Not less |
10 |
||
|
Thermal conductivity，35℃，W/(m·K) no more than |
0.050 |
||
|
Dimensional stability（23±2）℃，48，h no more than |
5 |
||
|
Operating temperature |
-10~+35℃ |
||
|
Optimum operating temperature |
+18~+25℃ |
||
|
Temperature range（After curing） |
-35~+80℃ |
||
|
Tensile bond strength kPa Not less |
Aluminum plate |
Standard condition，7d |
80 |
|
Immersion，7d |
60 |
||
|
PVC plate |
Standard condition,7d |
80 |
|
|
Immersion，7d |
60 |
||
|
Cement Plate |
Standard condition，7d |
60 |
|
|
Shear strength，kpa，Not less |
80 |
||
|
Foam expansion ratio，Not less |
Standard value-10 |
||
Certification
JC 936-2004
Color
White
Package
750ml in Bottle * 12 per box
Shelf life
12 months
Note
If you want the TDS or MSDS or other details, please contact with our sales person.
UTVHitchworks.com – Welcome to UTV Hitchworks, Home of the Farmboy. In this video we will be demonstrating the proper installation of the Bed Boss rack system. The first step is to remove the rubber caps located at the 4 corners of the dump bed. Then, raise the dump bed to provide room for the installation of the side pieces of the Bed Boss. Slide the short pieces into the holes in the corner of the dump bed, making sure that the mesh is on the inside. Then, lower the dump bed back down. Once this is done, locate the remaining wall that does not have the UTV Hitchworks tag on it. This will be installed at the front of the dump bed using the provided bolts and washers. 2 washers should go between each piece. Again, make sure the mesh is on the inside. Next, install the last side wall directly over the tailgate with the mesh facing inside. Only 2 bolts will be used on this piece, in the upper holes. Once all sides are in place, tighten bolts fully. Next, install the pins as shown. Final installation should look like this. If you have any questions, or to see the rest of our products, visit utvhitchworks.com
