New Arrival China SV-311 Polyurethane Sealant for Construction to United Arab Emirates Factories

New Arrival China SV-311 Polyurethane Sealant for Construction to United Arab Emirates Factories
  • New Arrival China SV-311 Polyurethane Sealant for Construction to United Arab Emirates FactoriesNew Arrival China SV-311 Polyurethane Sealant for Construction to United Arab Emirates Factories
  • New Arrival China SV-311 Polyurethane Sealant for Construction to United Arab Emirates FactoriesNew Arrival China SV-311 Polyurethane Sealant for Construction to United Arab Emirates Factories

Short Description:

Description SV-311  is a one component polyurethane high modulus flexible sealant formulated as reliable bonding adhesive and joint sealant for construction industry, particularly where a higher modulus and lower movement capacity are required for joints with low or medium movement, e.g. connection joints between floor/stairs and wall, connection joints between floor and machinery, seam sealing / sealing of pipe ducts / ventilation systems, multipurpose joints in metal and wood construction w...


Product Detail

Attentions

Application

Product Tags

Sticking to the belief of "Creating products of high quality and making friends with people from all over the world", we always put the interest of customers in the first place for New Arrival China SV-311 Polyurethane Sealant for Construction to United Arab Emirates Factories, We welcome new and old customers from all walks of life to contact us for future business relationships and achieving mutual success!


Description

SV-311  is a one component polyurethane high modulus flexible sealant formulated as reliable bonding adhesive and joint sealant for construction industry, particularly where a higher modulus and lower movement capacity are required for joints with low or medium movement, e.g. connection joints between floor/stairs and wall, connection joints between floor and machinery, seam sealing / sealing of pipe ducts / ventilation systems, multipurpose joints in metal and wood construction work.

 

Key Features

1. Non-sag consistency 

2. Excellent adhesion to most common building materials

3. High tear strength 

4. High tensile strength

5. Less fluid migration to porous material

 

Technical data sheet
Test standard Test project Unit value
GB13477 density g/m³ 1.20±0.1
GB13477 Flow, sagging or vertical flow mm 0
GB13477 surface drying time(25℃,50%R.H.) min 30
  Curing speed mm/24h 3
GB13477 Durometer Hardness Shore A 25-35
GB13477 100% tensile strength Mpa ≤0.4
GB13477 The elastic recovery rate % 80
  Maximum seam width mm 35
  Minimum seam width mm 8

Color

White, black, grey

 

Package

300ml plastic cartridges and 600ml in sausage

 

Shelf life

9 months 

 

Note

If you want the TDS or MSDS or other details, please contact with our sales person.

  • Previous:
  • Next:



  • https://www.drenergysaver.com | 1-888-225-6260

    In this 50th episode of the “On The Job” web series, Larry Janesky does something a little different. Rather than walking us through a recent project, he takes us to Dr. Energy Saver’s National Energy Conservation Center – a 40,000 sq. ft. training facility at the company’s headquarters in Seymour CT – to demonstrate how different types of insulation materials will behave in case of a house fire.

    Fire rating of insulation materials is something often overlooked not only in energy-efficient upgrades, but also in new construction. There are some code-mandated guidelines for using different types of insulation in different areas of the house, but at Dr. Energy Saver, we believe that the fire safety of homes and buildings can be greatly improved with the right choice of materials.

    This is not a scientific test. The purpose of this video is to demonstrate the significant differences in the way different insulation materials behave when exposed to fire.

    Using a propane torch, Larry put all the most common types of insulation to the test, including fiberglass (faced and unfaced), open-cell foam, closed-cell foam, open-cell foam with FSK paper, polyisocyanurate foam, fire resistant open-cell foam, expanded polystyrene foam, extruded polystyrene foam, fire block foam, denim insulation, AirKrete injection foam, cellulose and Rockwool insulation.

    According to this demonstration, the best performing materials by far were AirKrete injection foam, cellulose and Rockwool, but Larry explains that this should not constitute grounds for avoiding the use any of the other materials, because each different material has its specific application. When it comes to green building and remodeling, there is no one-size-fits-all solution. Smart energy-efficient retrofitting is about evaluating each home’s features, energy consumption patterns and finding the best materials and techniques to achieve the most energy savings while making homes more comfortable, healthier and safer.

    Dr. Energy Saver dealers nationwide have improved the homes and lives of many homeowners across the United States and we’d love to help you too! Call us or visit our website to locate a dealer near you!

    Subscribe to our YouTube channel for updates on new “On The Job” episodes!



    Watch as the Dremel Multi-Max and MM501 Carbide Grout Blade remove old grout around a bath tub to be replaced with clean grout for a refreshed look.

    The action of the Dremel Multi-Max coupled with its uniquely shaped grout blade makes it the perfect solution for repairing a baths surround.

    For this project we’ll use the Dremel Multi-Max oscillating tool and MM501 one-sixteenth inch Carbide Grout Blade. Begin this project by inserting the carbide grout blade into the tool. Tighten the screw with the allen wrench to secure the blade in the holder. Set the tool to medium to high speed then guide the blade into the grout. To protect your tub we recommend that you apply a line of tape around the top edge of your tub first. You can also tape the tile for added protection. In smooth even motions continue to remove the grout on all sides.

    Depending on the hardness of the grout a few passes may be required. If needed the blade can be easily rotated to get into tight corners. Be sure to unplug the tool before changing the blade. Remember to keep the blade parallel to the tub ledge, do not allow it to rest on the tub to avoid any scratches. This also sets the blade to a right angle at the wall. Put the blade in the grout and with a smooth motion you’ll prevent tiles for being nicked. To control plunge depth use the carbide grit line on the blade as an indicator. Do not plunge beyond the grit line as you could damage the backer board material. When you’re finished dust the area, remove the layer of tape and whipe clean with a damp cloth. Start your line of cualk working from the corner’s first. Once a smooth bead is all that’s left, wet your finger and smooth out the caulk. Let it set for the recommended time and your bath is as good as new.

    Learn more about Dremel Multi-Max tools: https://goo.gl/D0QXLM

    Related Products

    WhatsApp Online Chat !