Low MOQ for CV-709 silicone sealant for PV moudels to New York Factories

Low MOQ for CV-709 silicone sealant for PV moudels to New York Factories
  • Low MOQ for CV-709 silicone sealant for PV moudels to New York FactoriesLow MOQ for CV-709 silicone sealant for PV moudels to New York Factories
  • Low MOQ for CV-709 silicone sealant for PV moudels to New York FactoriesLow MOQ for CV-709 silicone sealant for PV moudels to New York Factories
  • Low MOQ for CV-709 silicone sealant for PV moudels to New York FactoriesLow MOQ for CV-709 silicone sealant for PV moudels to New York Factories

Short Description:

Description CV709 is a high-performance silicone sealant, one-component oxime type room temperature curing silicone rubber, has excellent weather resistance, high thixotropy, after curing for solar components involved in the base material has good caking property, by TUV for environmental requirements of the ROHS, UL E339949   Key Features 1. 100% silicone 2. No sag 3. high thixotropy 4. Water & weatherproof 5. For solar components involved in the base material has good bonding   Basic Ap...


Product Detail

Attentions

Application

Product Tags

We insist on the principle of development of 'High quality, Efficiency, Sincerity and Down-to-earth working approach' to provide you with excellent service of processing for Low MOQ for CV-709 silicone sealant for PV moudels to New York Factories, Welcome to contact us if you are interested in our product, we will give you a surprice for Qulity and Price.


Description

CV709 is a high-performance silicone sealant, one-component oxime type room temperature curing silicone rubber, has excellent weather resistance, high thixotropy, after curing for solar components involved in the base material has good caking property, by TUV for environmental requirements of the ROHS, UL E339949

 

Key Features

1. 100% silicone

2. No sag

3. high thixotropy

4. Water & weatherproof

5. For solar components involved in the base material has good bonding

 

Basic Application

1.Solar module frame seal

2.The adhesive of the solar energy back to the terminal block

3.General industrial assembly with seal

 

Technical data sheet

Test standard Test project Unit value
Before curing——25℃,50%R.H.
  specific gravity g/ml 1.34-1.40
GB13477 Operating time min 15
GB13477 surface drying time(25℃,50%R.H.) min 40-60
3 days after curing——25℃,50%R.H.
  Temperature range -55~200
GB13477 Durometer Hardness Shore A 40~55
  The ultimate tensile strength Mpa ≥2
GB13477 Breaking elongation % 300-600
  Aluminum bonding shear strength Mpa ≥1.5
Electrical properties
  Breakdown voltage Kv/mm ≥20
  Volume resistance ohm.cm 9E+14
  Dielectric constant   3.1@50Hz

 

Certification

UL E339949; TUV

 

Color

Black, White

 

Package

300ml in cartridge * 24 per box, 500ml in sausage *20 per box

 

Shelf life

12 months

 

Note

If you want the TDS or MSDS or other details, please contact with our sales person.

  • Previous:
  • Next:



  • Click here to see this product & more on Fibreglast.com: https://bit.ly/1K8PvxG

    Excellent Clarity and Durability

    #3500 Clear Urethane Casting Resin is perfectly water clear and won’t yellow with UV exposure like an epoxy would. Also, it won’t discolor in high humidity environments. This room temperature cure, two-part casting resin is self leveling and can be poured to create exceptionally rigid, durable, and impact resistant parts in applications that previously used acrylic or polycarbonate.

    It is more resilient than clear polyester casting resins, and can be used to create quieter, more durable tabletops than clear epoxy resins. Typical applications include: lenses, clear reproduction parts, decorative pieces, prototype models, tabletops, and encapsulations. This resin can pour castings as shallow as 1/4″ up to 3″ deep at a time.

    When mixed thoroughly, pour the clear urethane slowly to aid the release of air bubbles. It may be necessary to place the mixed resin in a degassing chamber to ensure all air is released to achieve a perfect casting. When using Clear Urethane Casting Resin, avoid water and all types of moisture contamination. Avoid direct contact with wood. Do not use any urethane kit with PVA Release Film, and do not mix with wooden mixing sticks. #2333 Plastic Paint Stirrers for Urethanes are recommended. To ensure a proper release from a mold, use at least four layers of #4121 Non-Silicone High Temp Paste Wax.

    If using as a tabletop coating, it is advisable to clean the tabletop surface with alcohol and dry with a heat gun. This will ensure the surface is moisture free. Light heat can also be added to aide in outgassing during the cure cycle. Do not over heat. As a tabletop resin, our #3500 Clear Urethane is quieter than epoxy resins, and will not crack.

    Related Products

    WhatsApp Online Chat !