Hot Selling for SV-312 Polyurethane Sealant for Windshield Glazing Export to French
Short Description:
Description SV-312 is an isocyanate-free, high modulus,non conductive, thixotropic, single component modified polyurethane adhesive, which polymerizes rapidly under the effect of atmospheric moisture. It has been specially designed for bonding of fixed glass in automotive repair. It allows a drive away time of 6 hours in vehicles with or without airbag. *Providing the ambient temperature is at least 23°C and relative humidity 50 %. At lower temperatures and humidities drive away time will be...
We have many excellent staff members good at marketing, QC, and dealing with kinds of troublesome problem in the production process for Hot Selling for SV-312 Polyurethane Sealant for Windshield Glazing Export to French, We appreciate your enquiry and it's our honor to work with every friend worldwide.
Description
SV-312 is an isocyanate-free, high modulus,non conductive, thixotropic, single component modified polyurethane adhesive, which polymerizes rapidly under the effect of atmospheric moisture. It has been specially designed for bonding of fixed glass in automotive repair.
It allows a drive away time of 6 hours in vehicles with or without airbag.
*Providing the ambient temperature is at least 23°C and relative humidity 50 %.
At lower temperatures and humidities drive away time will be longer.
Where to use
Bonding and sealing for windshield glass, glass fiber reinforced plastic fittings, steel and aluminum board of automobiles.
Key Features
a. Fast curing under room temperature, no sagging, solvent free
b. High bonding strength,
c. Good chemical and water resistance
d. No conductive
e. Excellent noise, vibration and impaction resistance
f. Automotive OEM quality
Technical data sheet
| Test standard | Test project | Unit | value |
| GB13477 | Flow, sagging or vertical flow | mm | 0 |
| GB13477 | surface drying time（25℃，50%R.H.） | min | 30 |
| Curing speed | mm/24h | 3 | |
| GB/T 531.1-2008 | Durometer Hardness | Shore A | 45 |
| GB/T 2793 | Non-volatile components | % | ≥96 |
| GB/T 528 | The tensile strength | Mpa | 2.5Mpa |
| GB/T 528 | Elongation at break | % | ≥400% |
| GB/T 528 | Tear strength | N/mm | ≥5.0 |
Color
White, black, grey
Package
300ml plastic cartridges and 600ml in sausage
Shelf life
9 months
Note
If you want the TDS or MSDS or other details, please contact with our sales person.
Visit: https://www.fabricprotectionsprays.com.au/collections/ray-and-rain-range
This Waterproof spray for fabric protection will protect anything from a t-shirt through to upholstery, carpets, sofas and interior textiles. Protects against sun (UV), water and stains. See how this t-shirt holds up against Red Wine.
Weather Proof Wire Nuts – Waterproof Connectors
Use with outdoor low voltage deck lights or any wet location connections.
* Essential for connections exposed to condensation, water, vapors or dust
* Eliminates the need for heat shrink or anti-corrosion devices
* Corrosion proof
* Long lasting
* Reduces fire risk
These silicone filled connectors can be used with the utmost confidence anywhere, especially where exposure to moisture or deteriorating agents exist. No more heat shrink, resin packs, or multi-piece corrosion kits are needed! These waterproof and direct burial connectors are for copper to copper connections only.
Installation Instructions
IMPORTANT: Turn off power before installing or removing connector. Product to be used in accordance with local and national codes.
1. Strip Wire – 1/2″ for 18 gauge wire nuts or 5/8″ for 12 gauge wire nuts.
2. Align any frayed strands or conductors
3. Pre-twisting unnecessary. Place stripped wires together with ends of insulation even.
4. Twist connector onto wires pushing firmly until hand-tight. Do not over torque.
5. Wipe sealant in and around conductors and connector opening with tightening. Do not reuse.
