Hot Selling for Siway SV-602 Epoxy Structural Adhesive A/B for Kuala Lumpur Importers
Short Description:
Description SV-602 is a 2-part structural epoxy adhesive developed for such application as dry fixing cladding. It has strong adhesion to metals, woods, reinforced plastics stone, ceramic and masonry. It is the best choice for bonding parts which must withstand weather, moisture and temperature fluctuations. SV-602 will adhere with minimum surface preparation and has a low coefficient of expansion. Key Features 1. Room temperature curing Epoxy adhesive 2. Fast cure at room temperature,...
Quality First,and Customer Supreme is our guideline to provide the best service to our customers.Nowadays, we are trying our best to become one of the best exporters in our field to meet customers more need for Hot Selling for Siway SV-602 Epoxy Structural Adhesive A/B for Kuala Lumpur Importers, we are now looking forward to even greater cooperation with overseas customers based on mutual benefits. If you are interested in any of our products, please feel free to contact us for more details.
Description
SV-602 is a 2-part structural epoxy adhesive developed for such application as dry fixing cladding. It has strong adhesion to metals, woods, reinforced plastics stone, ceramic and masonry. It is the best choice for bonding parts which must withstand weather, moisture and temperature fluctuations. SV-602 will adhere with minimum surface preparation and has a low coefficient of expansion.
Key Features
1. Room temperature curing Epoxy adhesive
2. Fast cure at room temperature, <40 min for reaching a tack-free status under standard environment (STD: 23℃, 50% humidity)
3. Mix ratio of 1:1 by volume or by weight
4. Good mechanical property
5. Bonds a wide variety of building materials
6. Good waterproofing and chemical resistance
Basic Application
1, the external walls of stone material, ceramic and other hang bond;
2, concrete, ceramics, stone, wood and other prefabricated split, bonding and jointing;
3, concrete, stone and so on crack repair;
4, the structure of the localization, anchor, reinforcement and reinforcement.
Technical data sheet
The following data is for reference only and is not recommended for the specification
| Shear strength | Stainless steel-stainless steel/Standard conditions | ≥18 | JC887-2001 | ||
| Pressure shear strength | Stone-stone/ Standard conditions | ≥12 | |||
| Stone-stone/ The freeze-thaw cycle 50 times | ≥10 | ||||
| Stone – stainless steel/ Standard conditions | ≥12 | ||||
| Standard conditions：Temperature=23℃，relative humidity=50%，48 hours curing | |||||
| attribute | SV-602-A | SV-602-B | SV-602(After mixing) | ||
| Colour | gray | white | grey | ||
| Density(g/cm³) | 1.8 | 1.8 | 1.8 | ||
| Viscosity（PaS） | 200-400 | 150-250 | |||
| Effective operating time(23℃) | N/A | N/A | 20min | ||
Certification
JC 887-2001
Color
Part A-Grey Paste/Part B-White Paste
Package
9kg/9kg per unit and 15kg/15kg per unit
Shelf life
12 months
Note
If you want the TDS or MSDS or other details, please contact with our sales person.
Silicone sealant dispensing: http://robot.fanucamerica.com/Products/Robots/painting-robots.aspx
FANUC America Authorized System Integrator Integrated Solutions developed a robotic sealant dispensing system to apply a silicone path on four different parts in order to prevent water from entering their doors.
The system utilizes FANUC’s versatile and compact LR Mate 200iD Robot to dispense the silicone onto the parts, and the robot uses Graco pumping and dispensing equipment to dispense. The system utilizes FANUC’s Dual Check Safety Software in two position check zones, providing safety rated speed and position monitoring on the robot. The system starts with DCS zone 1 activated – The user places and screws down a nest on the mounting plate, then places parts inside the nest. Upon pressing the cycle start button, the system’s pneumatically controlled door is actuated, an interlock switch is made and DCS zone 2 is enabled. From here, the system determines what nest is present based on a combination of proximity sensors, then runs its program accordingly based on the part.
The system’s vacuum turns on and suctions the parts down to ensure Z-axis placement of the parts. The FANUC LR Mate 200iD robot moves to the nest approach point. The robot then moves to the laser approach point. This laser has multiple functions, including confirmation of part presence and that the part is successfully suctioned, effectively reassuring that the Z-axis of each part is accurate. The FANUC robot lays the silicone bead with extreme precision and accuracy, then returns to the home position. Mineral water is used to prevent the needle tip from drying out.
To learn more about FANUC America Authorized System Integrator, Integrated Solutions, and their full range of automation capabilities, please visit http://www.integratedsolutions.com.
General sealants are not suitable for applications where high dynamics loads are encountered. This video explains why V-tech MS Industrial Adhesive Sealants are the right bonding and sealing solutions for different industrial applications.
For more information visit:
www.vitaltechnical.com
