Hot-selling attractive price Siway SV-602 Epoxy Structural Adhesive A/B to Slovenia Factory
Description SV-602 is a 2-part structural epoxy adhesive developed for such application as dry fixing cladding. It has strong adhesion to metals, woods, reinforced plastics stone, ceramic and masonry. It is the best choice for bonding parts which must withstand weather, moisture and temperature fluctuations. SV-602 will adhere with minimum surface preparation and has a low coefficient of expansion. Key Features 1. Room temperature curing Epoxy adhesive 2. Fast cure at room temperature,...
We also offer product sourcing and flight consolidation services. We have our own factory and sourcing office. We can provide you with almost every type of product related to our product range for Hot-selling attractive price Siway SV-602 Epoxy Structural Adhesive A/B to Slovenia Factory, If you are interested in any of our products or would like to discuss a custom order, please feel free to contact us. We are looking forward to forming successful business relationships with new clients around the world in the near future.
SV-602 is a 2-part structural epoxy adhesive developed for such application as dry fixing cladding. It has strong adhesion to metals, woods, reinforced plastics stone, ceramic and masonry. It is the best choice for bonding parts which must withstand weather, moisture and temperature fluctuations. SV-602 will adhere with minimum surface preparation and has a low coefficient of expansion.
1. Room temperature curing Epoxy adhesive
2. Fast cure at room temperature, <40 min for reaching a tack-free status under standard environment (STD: 23℃, 50% humidity)
3. Mix ratio of 1:1 by volume or by weight
4. Good mechanical property
5. Bonds a wide variety of building materials
6. Good waterproofing and chemical resistance
1, the external walls of stone material, ceramic and other hang bond;
2, concrete, ceramics, stone, wood and other prefabricated split, bonding and jointing;
3, concrete, stone and so on crack repair;
4, the structure of the localization, anchor, reinforcement and reinforcement.
Technical data sheet
The following data is for reference only and is not recommended for the specification
|Shear strength||Stainless steel-stainless steel/Standard conditions||≥18||JC887-2001|
|Pressure shear strength||Stone-stone/ Standard conditions||≥12|
|Stone-stone/ The freeze-thaw cycle 50 times||≥10|
|Stone – stainless steel/ Standard conditions||≥12|
|Standard conditions：Temperature=23℃，relative humidity=50%，48 hours curing|
|Effective operating time(23℃)||N/A||N/A||20min|
Part A-Grey Paste/Part B-White Paste
9kg/9kg per unit and 15kg/15kg per unit
If you want the TDS or MSDS or other details, please contact with our sales person.
Action Wipes are a safe and effective way to remove all types of contaminants, even silicone, from hands – also great for cleaning hard surfaces. Supplied in packs of 100 wipes. For more information and supply please contact Capital Power Clean on 01506 854585.
Today, Greg polishes swirls and scratches away from wood dashboard trim in a BMW 530i. Watch how Greg erases years of use and abuse on the rock-hard shiny wood with just a couple products.
This is a video for our viewers who asked how to care for wood trim. If you have a Mercedes, BMW, Lexus, Toyota, or Volvo, a lot of these luxury cars have a wood veneer trim. Looks kinda hot.. some people think it’s old grandma but it looks kinda cool. This trim is actually sensitive to getting scratches and swirl marks. Then when the sun hits it, you see the swirl marks and the trim looks bad.
What causes swirl marks? It’s people doing this… people doing this s@#t… all this… Nobody likes that s@#t, so we’re gonna polish it off because nobody likes that look. I’m gonna take some V36 and show you how to polish wood trim.
V36 is a cutting polish designed for paint, but this wood veneer has a clear coat over it, and we’re gonna make sure it looks real nice. First I’ll shake it up, then use a Hex-Logic White hand pad. I’ll gently spread it on the wood veneer. If you get it on the door panel, it’s not a big deal, it’ll just wipe off. I’ll just lightly polish the surface. The cool thing about cutting polish is it removes light swirls and scratches and enhances gloss.
This wood had some swirls on it and it kind of looked bad, now we’re cleaning it up to make it look fresh and hot again. I like my wood to look smooth and yummy. You can see some dirt coming off from the trim. That’s from people licking it and doing weird stuff to the wood. I’ll take one of my eco-green Workhorse microfiber towels, and buff off the wood trim.
There we go. Cool.. Fresh… We’ve got a lot of shine out of the trim. It looks much glossier. This trim has never been done. The car is from 2002, it has over 177,000 miles on it… But now it looks real fresh and we’ve restored gloss to the dash. If you have heavy swirls and scratches, you can use a machine polisher. I’ll show you that next.
I’ll show you how to machine polish wood trim. All the ladies love my rock-hard wood. When it’s shiny and looks good, we all enjoy it. We have some annoying scuffs and scratches here. But before you start polishing a dash, you need to tape up the area where you’ll be working.
I’m back on this side and I’ll show you how to machine polish wood trim. When your rock-hard wood looks good, all the ladies love it. So keep your wood polished, and make sure your knobs look clean. To do this, I’m going to use a Porter Cable 7424XP with a 3” backing plate. If you want to know how to install a 3” backing plate, check our YouTube channel for the how-to video. I’m also using a Green Hex-Logic 4.5” heavy polishing pad.
You may have noticed I taped up the area around the wood. I did that because I don’t want to harm the dashboard. There’s some overhang from my buffer, and I don’t want to stain the dash. This blue painters tape will not really stick to this dash, but it should protect us enough. I’m gonna go ahead and place a few dots of V36 on my polishing pad. You’ll notice I’m using very little polish since I’m doing such a small area.
I’ll spread it out over the surface, and you’ll see the tape is already doing its job. I’ll spread it out… there we go. Before you polish your wood trim, make sure it’s real wood and not vinyl. This is what’s called a wood veneer. It’s a thin piece of wood with a clear coat on it. So I’m polishing the clear coat, not the actual wood. I’ll go with speed setting 5 for this job. Let’s go ahead and polish this!
There we go, a light polish is all we need. I’ll buff off the extra polish with a microfiber towel.
Now we have a smooth dashboard. If you want to protect your dashboard, you can use a premium sealant or a natural carnauba wax. I’m going to use JetSeal because this car gets driven by me and other Chemical Guys employees on the way to lunch, and they have greasy fingers. I’m going to go ahead and protect the dash from their greasy nasty fingers. I’ll just place this all over the dash, that’ll seal it up and give it a nice look. I’ll give it 20 minutes to dry, then come back.
Oh! It’s been 20 minutes already. Geez, time flies! I’ll go ahead and buff off any sealant that was on the dash.
Now you’ll see the wood really shines. We cleaned off any swirls, and we have a nice smooth finish. It looks significantly glossier than this wood over here. This wood has actually started to crack over this CD player. You know you’re legit when you have a business CD player! Now the wood looks fresh and clean. I’m liking it, and I know everyone who comes in the car will notice the amazing rock hard wood!
If you have any more questions about JetSeal, or wood polishing with V36, check them out at our website. Subscribe to our YouTube channel for more videos on all this cool stuff.
See you next time!