Hot sale Factory SMP-333 Industrial silane modified polyether sealant Supply to Hanover
Description SMP333 Industrial Silane Modified Polyether Sealant is a transparent single component, high performance, neutral curing adhesive. The product is green and does not contain toxic and harmful substances. It has good bonding ability for most substrates such as metal, ceramics, wood, polyvinyl chloride (PVC) and polycarbonate (PC). After curing, the surface can be coated and can be widely Used in a variety of train / bus / car and other motor vehicles, elevator cars, containers, machi...
Our development depends on the advanced equipment, excellent talents and continuously strengthened technology forces. Hot sale Factory SMP-333 Industrial silane modified polyether sealant Supply to Hanover, We sincerely welcome overseas customers to consult for the long-term cooperation and the mutual development.We strongly believe that we can do better and better.
SMP333 Industrial Silane Modified Polyether Sealant is a transparent single component, high performance, neutral curing adhesive. The product is green and does not contain toxic and harmful substances. It has good bonding ability for most substrates such as metal, ceramics, wood, polyvinyl chloride (PVC) and polycarbonate (PC). After curing, the surface can be coated and can be widely Used in a variety of train / bus / car and other motor vehicles, elevator cars, containers, machinery and equipment, electrical equipment and other areas of the adhesive seal.
1.Environmental protection products: fast curing, low VOC, non-toxic and tasteless, non-polluting substrate, no corrosion.
2.The surface can be painted: the surface can be sprayed after the surface coating paint color.
3.Good operability: one-component, easy to operate, in the 4 ℃ ~ 40 ℃ temperature range has a good extrudability, with a plastic gun extrusion can be directly.
4.Excellent adhesion: with metal, ceramics, wood and PVC, PC, PA and other materials with excellent adhesion, without the use of primer.
5.Excellent weather resistance, aging resistance, dielectric and mechanical properties.
Where to use
Train / bus / car and other motor vehicle body, interior, floor, air conditioning and other systems of bonding and sealing.
Mobile phones, tablet PCs, navigators, digital cameras and other electrical equipment bonding seal.
Containers, elevator cars, ventilation equipment, such as seams sealed.
Electronics, machinery, ships and other areas of the adhesive seal.
Other suitable for this product in the field of bonding and sealing purposes.
Technical data sheet
|Test standard||Test project||Unit||value|
|coloer||Black, white, gray|
|GB13477||surface drying time（25℃，50%R.H.）||min||15-60|
|GB528||Elongation at break||%||600|
300ml in cartridge * 24 per box, 500ml in sausage *20 per box
If you want the TDS or MSDS or other details, please contact with our sales person.
To know more about the great company which manufacture silicone rubber and resins, polyurethane and so on. please feel free to contact Jasmine, skpye: Jasminechanszrl.net Email: email@example.com
Installation Instructions for an ASI Soundproof Door – High Definition version
The wall that this was installed to was treated with products, too. You can view our video on Soundproofing a Wall (https://www.youtube.com/watch?v=rVtY6MZoFrY) for more information.
-Quart-Size Caulk Gun
-Heavy Duty Screws*
-Door Hardware Kit*
-Door Casing (One installed on door when shipped, other side comes loose)*
-Door & Jamb*
*Included in Door Purchase (https://bit.ly/qZQjRh)
Make sure to inspect the door and included items for any damage prior to installation.
1. Unscrew the temporary threshold on the bottom of the door.
2. Determine which side of the jamb the hinges will be.
3. Measure and mark hinge locations onto the door frame.
4. Place a set of shims at each hinge, making sure they are plumb with the level.
5. Tip the door into place, make sure all is plumb and level.
6. Remove the two screws in the hinge closest to the door stop.
7. Repeat for each hinge.
8. Prop the bottom corner of the door with it swung at 90 degrees so that it holds the jamb tight to the drywall.
9. Pre-drill the holes from the screws you just removed to prepare for the long screws. (We use a 5/32 bit)
10. From top hinge down, install the included long screws.
11. Adjust shims as necessary to ensure the door stays level.
12. Shim the strike side of the door to get an even reveal on the inside of the door.
13. Install the backer rod around the gap in the rough opening by pushing it in about an inch deep. You can use a shim to push it in.
14. Fill the remaining gap with acoustical sealant.
15. Remove the temporary brace off the bottom of the trim kit.
16. Maintaining a 1/4″ reveal, attach the trim with the supplied screws.
17. Nail trim to wall as needed.
18. Fill holes with wood putty and sand.
19. Remove the short hardware screws that came shipped from the strike side of the door.
20. Replace them with the long screws for the strike hardware to secure the framing.
21. Remove the trim on the hinge side of the door that shipped on the door.
22. Repeat steps 13-18 on this side of the door.
23. Install door hardware as specified.
24. Ensure the door is shut and latched.
25. Adjust the door seals by locating the Phillips screws on the face of the door seal and turn counter-clockwise to tighten the door seal. This will close the gap between the seal and the door.
26. Work the way down the seal until all screws are adjusted so that the seal comes in contact with the door slab.
27. Trim off excess gasket on the strike side of the door jamb at the bottom so that the gasket is flush with the floor.
28. Adjust the bottom drop seal by loosening the set screw at the top of the drop seal counter-clockwise. When the screw engages the stop on the jamb, it will drop the seal down.
29. Peel off the backer on the peel-and-stick seal cover panels and pressure fit over door seals. Start with the top and fit the sides into the miter.