Hot New Products SV-312 Polyurethane Sealant for Windshield Glazing to Cologne Factory
Short Description:
Description SV-312 is an isocyanate-free, high modulus,non conductive, thixotropic, single component modified polyurethane adhesive, which polymerizes rapidly under the effect of atmospheric moisture. It has been specially designed for bonding of fixed glass in automotive repair. It allows a drive away time of 6 hours in vehicles with or without airbag. *Providing the ambient temperature is at least 23°C and relative humidity 50 %. At lower temperatures and humidities drive away time will be...
With our excellent management, strong technical capability and strict quality control system, we continue to provide our clients with reliable quality, reasonable prices and excellent services. We aim at becoming one of your most reliable partners and earning your satisfaction for Hot New Products SV-312 Polyurethane Sealant for Windshield Glazing to Cologne Factory, We are sincerely looking forward to establishing good cooperative relationships with customers from at home and abroad for creating a bright future together.
Description
SV-312 is an isocyanate-free, high modulus,non conductive, thixotropic, single component modified polyurethane adhesive, which polymerizes rapidly under the effect of atmospheric moisture. It has been specially designed for bonding of fixed glass in automotive repair.
It allows a drive away time of 6 hours in vehicles with or without airbag.
*Providing the ambient temperature is at least 23°C and relative humidity 50 %.
At lower temperatures and humidities drive away time will be longer.
Where to use
Bonding and sealing for windshield glass, glass fiber reinforced plastic fittings, steel and aluminum board of automobiles.
Key Features
a. Fast curing under room temperature, no sagging, solvent free
b. High bonding strength,
c. Good chemical and water resistance
d. No conductive
e. Excellent noise, vibration and impaction resistance
f. Automotive OEM quality
Technical data sheet
| Test standard | Test project | Unit | value |
| GB13477 | Flow, sagging or vertical flow | mm | 0 |
| GB13477 | surface drying time（25℃，50%R.H.） | min | 30 |
| Curing speed | mm/24h | 3 | |
| GB/T 531.1-2008 | Durometer Hardness | Shore A | 45 |
| GB/T 2793 | Non-volatile components | % | ≥96 |
| GB/T 528 | The tensile strength | Mpa | 2.5Mpa |
| GB/T 528 | Elongation at break | % | ≥400% |
| GB/T 528 | Tear strength | N/mm | ≥5.0 |
Color
White, black, grey
Package
300ml plastic cartridges and 600ml in sausage
Shelf life
9 months
Note
If you want the TDS or MSDS or other details, please contact with our sales person.
click here to review https://www.amazon.com/exec/obidos/ASIN/B00TGAISX6/kastruli-20/
Silicone Lids:Preserve Food Longer with Tight Vacuum Seal on Bowls Pots
Detailed explanation about how to use LIQUID RUBBER to DIY waterproof & fix a leaking roof. Demonstrates the importance of methodical surface preparation & polyethylene fabric for detailing. FIND OUT MORE ON WEBSITE: https://www.diywaterproofing.com.au
LIQUID RUBBER ideal waterproof membrane to patch a roof. PURCHASE HERE https://www.diywaterproofing.com.au/shop/
DELIVERY THROUGHOUT AUSTRALIA. PH 03 8812 2918
USE FOR: Roof, Balcony, Retaining Wall & Internal Waterproofing.
DIY Waterproofing with Liquid Rubber – Bush/Roll On is used as a protective coating to prevent water leaks & corrosion damage.
Liquid Rubber can be applied to Metal, Concrete & Timber.
LIQUID RUBBER APPLICATION
Liquid rubber is water based environmentally safe alternative to conventional heat-applied or solvent based waterproofing systems.
When cured, Liquid Rubber Waterproofing Membrane will form a continuous, seamless & flexible coating.
LIQUID RUBBER is a single component product that may be applied using a brush, roller or squeegee.
LIQUID RUBBER can also be spray applied using specially designed spray equipment.
LIQUID RUBBER cures by evaporation & application temperature of 15 – 40°C is recommended.
LIQUID RUBBER should be applied to a dry surface which is free of dirt, debris, oil or grease.
Joints or cracks in the surface should be reinforced using GEOTEXTILE Reinforcing Cloth.
Ph: 03 8812 2918
Website: https://www.diywaterproofing.com.au
YouTube:
FB: https://www.facebook.com/DIYWaterproofing?ref=hl
G+:https://plus.google.com/b/115557979586393880420/+DiywaterproofingAu
I created this video with the YouTube Video Editor (https://www.youtube.com/editor)
