High Quality Siway MG PU FOAM Wholesale to Sudan

High Quality
 Siway MG PU FOAM Wholesale to Sudan
  • High Quality
 Siway MG PU FOAM Wholesale to SudanHigh Quality
 Siway MG PU FOAM Wholesale to Sudan

Short Description:

Description MG PU FOAM is the expansion, moisture curing, has the strong cohesiveness, elastic foam obturator structure; Save work to save time, reduce waste; High bond strength; Bubble can stick in the concrete, wood, metal, plastic, such as base material surface, but not including teflon, silicon resins;   Key Features 1. Noise silencing effect 2. Strong bonding strength 3. Water & weatherproof 4. Primerless adhesion to most building materials   Basic Application 1.Doors and Windows and...


Product Detail

Attentions

Application

Product Tags

The key to our success is "Good Product Quality, Reasonable Price and Efficient Service" for High Quality Siway MG PU FOAM Wholesale to Sudan, We will wholeheartedly welcome all clients in the industry both at home and abroad to cooperate hand in hand, and create a bright future together.


Description

MG PU FOAM is the expansion, moisture curing, has the strong cohesiveness, elastic foam obturator structure; Save work to save time, reduce waste; High bond strength;

Bubble can stick in the concrete, wood, metal, plastic, such as base material surface, but not including teflon, silicon resins;

 

Key Features

1. Noise silencing effect

2. Strong bonding strength

3. Water & weatherproof

4. Primerless adhesion to most building materials

 

Basic Application

1.Doors and Windows and wall body between the gap filling sealing, fixed bond

2.Language lab, studio, etc when decorating, gap to fill

 

Technical data sheet

Project

Value

Density, Kg/m³,Not less

10

Thermal conductivity,35℃,W/(m·K) no more than

0.050

Dimensional stability(23±2)℃,48,h no more than

5

Operating temperature

-10~+35℃

Optimum operating temperature

+18~+25℃

Temperature range(After curing)

-35~+80℃

Tensile bond strength

kPa

Not less

Aluminum plate

Standard condition,7d

80

Immersion,7d

60

PVC plate

Standard condition,7d

80

Immersion,7d

60

Cement Plate

Standard condition,7d

60

Shear strength,kpa,Not less

80

Foam expansion ratio,Not less

Standard value-10

 

Certification

JC 936-2004

 

Color

White

 

Package

750ml in Bottle * 12 per box

 

Shelf life

12 months

 

Note

If you want the TDS or MSDS or other details, please contact with our sales person.

  • Previous:
  • Next:



  • Introduction to Pureshield

    Pureshield is a fast growing company which deals with the sourcing, development, and distribution of high-end surface technology products. Pureshield Car Glass Sealant is a hydrophobic coating for Automotive Glass which enhance visibility by repelling water, dirt and oils making the glass easy to clean. Pureshield Car Glass selant is a 3 sachet set for Pre-Cleaning, Sealing and Polishing.

    Preparing For Application

    Car must be inside the garage and away from direct sunlight before the application .
    Clean the outer glass surface to be applied thoroughly with water and make it dry
    In hot conditions, when temperature is over 35 degree celcius, it is advisable to keep the temperature down by switching on the air conditioner in the car.
    Wipe the glass clean with lint free cotton cloth, and ensure that all traces of water and dust are removed.

    Application

    Wear gloves provided in the set before starting application.

    Pre-Cleaning,

    Open the Cleaning Sachet(Sachet No:1), and use cleaning cloth to wipe clean the glass in uniform circular motions.
    Ensure that the entire surface of the glass is wiped clean. Do not leave any gaps.
    Wipe clean the glass, at least twice using both sides of the cleaning cloth.
    This will help to remove any additional grease or any other oily substances which will not be cleaned with water alone.
    Make sure that the Glass is completely dry before the next procedure.

    Sealing

    Open Sealant Sachet (Sachet No;2) and use sealing cloth to apply the sealant.
    Start applying from the drivers side from top to bottom and continue this till the full Glass is coated with sealant solution. Use either side of the sealing cloth, this should be done with out wasting any time as the sealant will be lost due to evaporation. As soon as the first layer is applied start polishing the surface with the same sealing cloth. with medium pressure in circular motion again starting from the drivers side and continue to the other end of the glass.
    Continue this for 8 to 10 rounds till the sealant sachet is completely dry. this is done to prevent the wastage and to use maximum number of nano particles are transferred to the glass from the sealant cloth.

    Polishing

    • Once polishing with the sealing cloth is over, then open the Polishing cloth(sachet no:3) and polish thoroughly in circular motion for about 10 to 15 minutes with medium pressure.

    • Polishing helps to fix the nano particles to the car glass and absorbs the base from the glass , so polishing is very important step in the application of Pureshield Car Glass Sealant.

    • After application the car must be inside the garage for minimum 3 -6 hours. It is advisable not to use the car for 12-24 hours to ensure maximum effect.

    Maintaining the Glass

    Do not use any chemicals such as de-icer to clean the glass. Use plain water only.
    If the hydrophobic effect fades, clean with water and polish with lint free cotton cloth.
    Hydrophobic effect fades over time, especially after first application. Repeat application within 4 to 6 months of first application will give a long lasting pureshield effect.



    Demonstrating the importance of shaking brushable catalyst for silicone RTV mold making rubber. For more information, please go to https://www.aeromarineproducts.com/ or call us toll-free 1.877.342.8860

    Related Products

    WhatsApp Online Chat !