High Quality Industrial Factory SV-8800 Silicone Sealant for Insulating Glass for Houston Factory
Description SV-8800 is two components, high modulus; neutral curing silicone sealant specifically developed for assembly of high performance insulated glass units as secondary sealing material. Where to use It is a two-component silicone that offers variable work life with high bonding strength to maintain the integrity of insulating glass unit, suits both commercial and residential IGU. Key Features 1. High Modulus 2. UV resistance 3. Low vapor and gas transmission 4. Primerless adhesion...
In the past few years, our company absorbed and digested advanced technologies both at home and abroad. Meanwhile, our company staffs a team of experts devoted to the development of High Quality Industrial Factory SV-8800 Silicone Sealant for Insulating Glass for Houston Factory, "Passion, Honesty, Sound service, Keen cooperation and Development" are our goals. We are here expecting friends all over the world!
SV-8800 is two components, high modulus; neutral curing silicone sealant specifically developed for assembly of high performance insulated glass units as secondary sealing material.
Where to use
It is a two-component silicone that offers variable work life with high bonding strength to maintain the integrity of insulating glass unit, suits both commercial and residential IGU.
1. High Modulus
2. UV resistance
3. Low vapor and gas transmission
4. Primerless adhesion to coated glass
5. 100% compatible to SV-8890
Technical data sheet
|Test standard||Test project||Unit||value|
|GB13477||Specific gravity(After mixing)||1.33|
|GB13477||surface drying time（25℃，50%R.H.）||min||80-188|
|7 days after curing——25℃，50%R.H.|
|GB/T 531||Durometer Hardness||Shore A||40|
|GB13477||The tensile modulus at 12.5% elongation||Mpa||0.18|
|The ultimate tensile strength||Mpa||0.92|
|GB13477||Elongation limit (fracture)||%||150|
Component A(Base) – White, Component B(Catalyst)- Black
1. Component A(Base): (190L), Component B(Catalyst) (18.5L)
2. Component A(Base):24.5kg (18L), Component B(Catalyst): 1.9kg (1.8L)
If you want the TDS or MSDS or other details, please contact with our sales person.
As it’s progressing to the time of the year (unless you live in the Southern Hemisphere) where the weather gets a bit rubbish, the DRtv team try their hand at weather sealing a DSLR.
Connect with us:
Bokeh by DigitalRev: https://bokeh.digitalrev.com
The fresher and funner photography read
Watch More DRTV Videos
Join DigitalRev Social and share your photos:
Shop DigitalRev Online Store:
Detailed explanation about how to use LIQUID RUBBER to DIY waterproof & fix a leaking roof. Demonstrates the importance of methodical surface preparation & polyethylene fabric for detailing. FIND OUT MORE ON WEBSITE: https://www.diywaterproofing.com.au
LIQUID RUBBER ideal waterproof membrane to patch a roof. PURCHASE HERE https://www.diywaterproofing.com.au/shop/
DELIVERY THROUGHOUT AUSTRALIA. PH 03 8812 2918
USE FOR: Roof, Balcony, Retaining Wall & Internal Waterproofing.
DIY Waterproofing with Liquid Rubber – Bush/Roll On is used as a protective coating to prevent water leaks & corrosion damage.
Liquid Rubber can be applied to Metal, Concrete & Timber.
LIQUID RUBBER APPLICATION
Liquid rubber is water based environmentally safe alternative to conventional heat-applied or solvent based waterproofing systems.
When cured, Liquid Rubber Waterproofing Membrane will form a continuous, seamless & flexible coating.
LIQUID RUBBER is a single component product that may be applied using a brush, roller or squeegee.
LIQUID RUBBER can also be spray applied using specially designed spray equipment.
LIQUID RUBBER cures by evaporation & application temperature of 15 – 40°C is recommended.
LIQUID RUBBER should be applied to a dry surface which is free of dirt, debris, oil or grease.
Joints or cracks in the surface should be reinforced using GEOTEXTILE Reinforcing Cloth.
Ph: 03 8812 2918
I created this video with the YouTube Video Editor (https://www.youtube.com/editor)