High Quality Industrial Factory Siway SV-602 Epoxy Structural Adhesive A/B for Morocco Factory

High Quality Industrial Factory Siway SV-602 Epoxy Structural Adhesive A/B for Morocco Factory
  • High Quality Industrial Factory Siway SV-602 Epoxy Structural Adhesive A/B for Morocco FactoryHigh Quality Industrial Factory Siway SV-602 Epoxy Structural Adhesive A/B for Morocco Factory

Short Description:

Description SV-602 is a 2-part structural epoxy adhesive developed for such application as dry fixing cladding. It has strong adhesion to metals, woods, reinforced plastics stone, ceramic and masonry. It is the best choice for bonding parts which must withstand weather, moisture and temperature fluctuations. SV-602 will adhere with minimum surface preparation and has a low coefficient of expansion.   Key Features 1. Room temperature curing Epoxy adhesive 2. Fast cure at room temperature,...


Product Detail

Attentions

Application

Product Tags

With our rich experience and considerate services, we have been recognized as a reliable supplier for many international buyers for High Quality Industrial Factory Siway SV-602 Epoxy Structural Adhesive A/B for Morocco Factory, we are looking forward to even greater cooperation with overseas customers based on mutual benefits. Please feel free to contact us for more detail


Description

SV-602 is a 2-part structural epoxy adhesive developed for such application as dry fixing cladding. It has strong adhesion to metals, woods, reinforced plastics stone, ceramic and masonry. It is the best choice for bonding parts which must withstand weather, moisture and temperature fluctuations. SV-602 will adhere with minimum surface preparation and has a low coefficient of expansion.

 

Key Features

1. Room temperature curing Epoxy adhesive

2. Fast cure at room temperature, <40 min for reaching a tack-free status under standard environment (STD: 23℃, 50% humidity)

3. Mix ratio of 1:1 by volume or by weight

4. Good mechanical property

5. Bonds a wide variety of building materials

6. Good waterproofing and chemical resistance

 

Basic Application

1, the external walls of stone material, ceramic and other hang bond;

2, concrete, ceramics, stone, wood and other prefabricated split, bonding and jointing;

3, concrete, stone and so on crack repair;

4, the structure of the localization, anchor, reinforcement and reinforcement.

 

Technical data sheet

The following data is for reference only and is not recommended for the specification

Shear strength Stainless steel-stainless steel/Standard conditions ≥18   JC887-2001
Pressure shear strength Stone-stone/ Standard conditions ≥12
Stone-stone/ The freeze-thaw cycle 50 times ≥10
Stone – stainless steel/ Standard conditions ≥12
Standard conditions:Temperature=23℃,relative humidity=50%,48 hours curing
attribute SV-602-A SV-602-B SV-602(After mixing)
Colour gray white grey
Density(g/cm³) 1.8 1.8 1.8
Viscosity(PaS) 200-400 150-250  
Effective operating time(23℃) N/A N/A 20min
           

 

Certification

JC 887-2001

 

Color

Part A-Grey Paste/Part B-White Paste

 

Package

9kg/9kg per unit and 15kg/15kg per unit

 

Shelf life

12 months

 

Note

If you want the TDS or MSDS or other details, please contact with our sales person.

  • Previous:
  • Next:



  • Pad printing silicone rubber is applicable to produce printing pads, mainly used for printing the irregular patterns on plastic toys, electroplating products, electronic toys, trademarks, etc.
    more information ,pls contact the email :info@szrl.net & info@resinpu.com .www.szrl.net



    Breathing protection and protective gear is a good idea when working with these products, no matter how safe they claim to be. Safer epoxies can harden quickly, and it is possible to end up with skin damage as a result. Some people are more sensitive than others to fumes, and even the products which claim to have “no fumes” and be safe to use indoors in enclosed spaces can cause problems for sensitive people.

    Always follow the safety suggestions on the product you are using.

    This video is really long. The next one will be shorter, I promise.

    If you don’t want to watch it, the short version is: Pond shield is a cycloaliphatic epoxy (proof in video). Everyone knows it works, but you might not know that cheaper solutions like Corotech V430 will work the exact same way, and you won’t even know the difference between the two.

    Polyamide epoxies are better in every way for DIY tanks than cycloaliphatic epoxies, and a quick cure polyamide epoxy like aquepoxy 250 HD is a much better solution than Pond Shield, and a lot cheaper ($240 for three gallons from Edison) http://www.edisoncoatings.com/store/aquepoxy_250.html)

    Phenalkamine epoxies like duraplate 325 work in cold weather, but otherwise I think they’re garbage. Ok, they’re actually really good, but they’re dangerous/fumey and I don’t think they’re worth the trouble unless you need to do use them in the cold.

    Lexel will probably work to seal rubber sealed tanks, but I honestly don’t know so if you’ve tried it tell me. It is fish tank safe after it cures, but it takes a week or longer to cure depending on thickness.

    I talk too much. Big surprise.

    There’s a lot more, but I’m going to bed.

    Related Products

    WhatsApp Online Chat !