High Quality Industrial Factory Siway MG PU FOAM Export to kazakhstan
Short Description:
Description MG PU FOAM is the expansion, moisture curing, has the strong cohesiveness, elastic foam obturator structure; Save work to save time, reduce waste; High bond strength; Bubble can stick in the concrete, wood, metal, plastic, such as base material surface, but not including teflon, silicon resins; Key Features 1. Noise silencing effect 2. Strong bonding strength 3. Water & weatherproof 4. Primerless adhesion to most building materials Basic Application 1.Doors and Windows and...
We are committed to providing easy,time-saving and money-saving one-stop purchasing service of consumer for High Quality Industrial Factory Siway MG PU FOAM Export to kazakhstan, We warmly welcome friends from all walks of life to seek mutual cooperation and create a more brilliant and splendid tomorrow.
Description
MG PU FOAM is the expansion, moisture curing, has the strong cohesiveness, elastic foam obturator structure; Save work to save time, reduce waste; High bond strength;
Bubble can stick in the concrete, wood, metal, plastic, such as base material surface, but not including teflon, silicon resins;
Key Features
1. Noise silencing effect
2. Strong bonding strength
3. Water & weatherproof
4. Primerless adhesion to most building materials
Basic Application
1.Doors and Windows and wall body between the gap filling sealing, fixed bond
2.Language lab, studio, etc when decorating, gap to fill
Technical data sheet
|
Project |
Value |
||
|
Density, Kg/m³，Not less |
10 |
||
|
Thermal conductivity，35℃，W/(m·K) no more than |
0.050 |
||
|
Dimensional stability（23±2）℃，48，h no more than |
5 |
||
|
Operating temperature |
-10~+35℃ |
||
|
Optimum operating temperature |
+18~+25℃ |
||
|
Temperature range（After curing） |
-35~+80℃ |
||
|
Tensile bond strength kPa Not less |
Aluminum plate |
Standard condition，7d |
80 |
|
Immersion，7d |
60 |
||
|
PVC plate |
Standard condition,7d |
80 |
|
|
Immersion，7d |
60 |
||
|
Cement Plate |
Standard condition，7d |
60 |
|
|
Shear strength，kpa，Not less |
80 |
||
|
Foam expansion ratio，Not less |
Standard value-10 |
||
Certification
JC 936-2004
Color
White
Package
750ml in Bottle * 12 per box
Shelf life
12 months
Note
If you want the TDS or MSDS or other details, please contact with our sales person.
How to unclog Paint Spray Cans – both types.
Well first, if you shake the spray paint can thoroughly for at least 5 minutes, you likely will have no problem with the paint clogging the spray can. But if you do have a clog in the paint spray can, I found the fastest and simplest way to unclog the spray paint can is to use compressed air. Most cans are filled to 90 psi to 105 psi at 70 to 75 degrees Fahrenheit when new. So I use about 100 psi to unclog the feed tube inside the can. I’ll use an old tire valve and push it on the top of the paint can tight and use compressed air at no more than 100 psi and that will push the clog back inside the spray can. Then shake the can up very well to break up any clumped paint inside the can and you should be good to go.
Thank you for watching video!
For the full details, please find on: https://amzn.to/1WgUDbh
