High Efficiency Factory SV-999 Structural Glazing Silicone Sealant for Bangkok Importers

High Efficiency Factory SV-999 Structural Glazing Silicone Sealant for Bangkok Importers
  • High Efficiency Factory SV-999 Structural Glazing Silicone Sealant for Bangkok ImportersHigh Efficiency Factory SV-999 Structural Glazing Silicone Sealant for Bangkok Importers
  • High Efficiency Factory SV-999 Structural Glazing Silicone Sealant for Bangkok ImportersHigh Efficiency Factory SV-999 Structural Glazing Silicone Sealant for Bangkok Importers
  • High Efficiency Factory SV-999 Structural Glazing Silicone Sealant for Bangkok ImportersHigh Efficiency Factory SV-999 Structural Glazing Silicone Sealant for Bangkok Importers

Short Description:

Description SV – 999 silicone structural sealant is a one-component, neutral curing, designed for glass curtain wall, aluminum curtain wall, glass daylighting roof and metal structural engineering structural assembly silicone sealant. Show the effective physical properties and bonding performance   Key Features 1. 100% silicone 2. No sag 3. Strong bonding strength 4. Water & weatherproof 5. Primerless adhesion to most building materials 6. 25% movement capability   Basic Application...


Product Detail

Attentions

Application

Product Tags

Reliable quality and good credit standing are our principles, which will help us at a top-ranking position. Adhering to the tenet of "quality first, customer supreme" for High Efficiency Factory SV-999 Structural Glazing Silicone Sealant for Bangkok Importers, Our final goal is "To try the best, To be the Best". Please feel free to contact with us if you have any requirements.


Description

SV – 999 silicone structural sealant is a one-component, neutral curing, designed for glass curtain wall, aluminum curtain wall, glass daylighting roof and metal structural engineering structural assembly silicone sealant. Show the effective physical properties and bonding performance

 

Key Features

1. 100% silicone

2. No sag

3. Strong bonding strength

4. Water & weatherproof

5. Primerless adhesion to most building materials

6. 25% movement capability

 

Basic Application

1.Glass curtain wall, aluminum curtain wall structure adhesive seal

2.Glass daylighting roof, metal structure engineering

3.Insulating glass bonding

 

Technical data sheet

Test standard Test project Unit value
Before curing——25℃,50%R.H.
  specific gravity g/ml 1.40
GB13477 Flow, sagging   or vertical flow mm 0
GB13477 Operating time min 15
GB13477 surface drying time(25℃,50%R.H.) min 40-60
Sealant curing speed and operating time   will have different with different temperatures and temperature, high   temperature and high humidity can make sealant curing speed faster, rather   low temperature and low humidity are slower.21 days after   curing——25℃,50%R.H.
GB13477 Durometer Hardness Shore A 40
  The ultimate   tensile strength Mpa 1.3
GB13477 Tensile strength(23℃) Mpa 0.8
GB13477 Tensile strength(90℃) Mpa 0.5
GB13477 Tensile strength(-30℃) Mpa 0.9
GB13477 Tensile strength(flooding) Mpa 0.6
GB13477 Tensile strength(flooding   – ultraviolet) Mpa 0.6

 

Certification

GB 16776;ASTM C1184

 

Color

Black

 

Package

300ml in cartridge * 24 per box, 500ml in sausage *20 per box

 

Shelf life

12 months

 

Note

If you want the TDS or MSDS or other details, please contact with our sales person.

 

  • Previous:
  • Next:



  • 3M 5200 Adhesive Sealant creates a waterproof permanent bond and seal. 3M now offers a 4200 for a less permanent seal and a 4000 for more cosmetic seal. All these and other 3M products are available at https://www.westmarine.com



    All heater mats are manufactured to conform to the EEC Low Voltage and EMC Directives and are CE marked accordingly. UL approval available.

    The etched foil element type is created by acid etching a circuit in resistance alloy foil. This process ensures excellent circuit pattern repeatability and allows the design of complex heat distribution patterns within the heater area.

    Etched foil elements are able to operate at very high watt densities, this is due to the large surface area covered by the foil track. The flat foil track also gives excellent uniformity and faster heat transfer resulting in longer heater life in high power applications.

    Etched foil heaters are available in three types of insulation;

    Silicone Rubber:
    Has superb electrical insulating properties and a high temperature tolerance. The maximum continuous operating temperature is 200°C with short-term excursions to 230° C.

    Kapton:
    Polyamide is a thin lightweight organic polymer film that provides excellent tensile strength, tear resistance and dimensional stability. Ideal for applications requiring low outgassing or resistance to radiation, chemicals and solvents. Operating temperature range up to +260° C

    Polyester:
    Low cost alternative to silicone rubber and kapton. Polyester is suitable for low temperature applications up to 120° C.

    The heaters for small batch runs can be produced as wire wound heaters but for larger production batches we would look to supply etch foil types.

    Wire wound heaters are available from one off to larger batch quantities with almost no limit to design variations to satisfy customer specification. A high quality product at competitive prices coupled with fast delivery times all backed up by a full design and technical service to meet our customers’ stringent requirements.

    All mats are manufactured to conform to the EEC Low Voltage and EMC Directives and are CE marked accordingly. UL approval available.

    Silicone rubber because of its high temperature tolerance and superb electrical insulating properties is well suited to the production of heater mats. Heater mats are produced by laminating the evenly spaced resistance wires between two sheets of silicone rubber, reinforced with a glass textile to give improved mechanical strength.

    These surface heaters are suitable for applications where precise heating is required. Fine resistance wires accurately and precisely positioned over areas of almost any shape or size. The close even spacing of the wires ensure a uniform heat distribution over the entire working area. The maximum continuous operating temperature for a silicone rubber heater mat is 200°C, allowing for a generous safety margin for short term over-temperature excursions as high as 230°C. Being thin and light weight, silicone rubber heater mats have a low thermal mass and therefore have rapid heat up characteristics and a fast response to temperature control.

    Heater mats can be manufactured in almost any size and shape to suit the application, including holes and cut outs without disturbing the even distribution of heat. Also available is a range of in-built temperature limiters or temperature sensors to suit customer’s instrumentation.

    Surface heaters can be supplied with an acrylic self-adhesive backing to allow for easy positioning and assembly. A separate silicone adhesive system is available if required. These heaters can also be manufactured with eyelets, straps, hooks or Velcro as further options for fixing. As for heaters which are not for static applications we can supply a more rugged silicone material to allow for repeated handling which will give a longer life.

    As an addition to our wire wound heaters we provide etched foil heaters to meet the demands of the OEM market. This enables us to offer flexible heaters in polyamide and Polyester insulation. Available in higher power densities with an exceptionally uniform heat output. Custom designs to suit any requirement.

    Related Products

    WhatsApp Online Chat !