Good Wholesale Vendors Siway SV-602 Epoxy Structural Adhesive A/B to Paraguay Importers

Good Wholesale Vendors 
 Siway SV-602 Epoxy Structural Adhesive A/B to Paraguay Importers
  • Good Wholesale Vendors 
 Siway SV-602 Epoxy Structural Adhesive A/B to Paraguay ImportersGood Wholesale Vendors 
 Siway SV-602 Epoxy Structural Adhesive A/B to Paraguay Importers

Short Description:

Description SV-602 is a 2-part structural epoxy adhesive developed for such application as dry fixing cladding. It has strong adhesion to metals, woods, reinforced plastics stone, ceramic and masonry. It is the best choice for bonding parts which must withstand weather, moisture and temperature fluctuations. SV-602 will adhere with minimum surface preparation and has a low coefficient of expansion.   Key Features 1. Room temperature curing Epoxy adhesive 2. Fast cure at room temperature,...


Product Detail

Attentions

Application

Product Tags

Our personnel are always in the spirit of "continuous improvement and excellence", and with the superior quality products, favorable price and good after-sales services, we try to win every customer's trust for Good Wholesale Vendors Siway SV-602 Epoxy Structural Adhesive A/B to Paraguay Importers, We are sincerely welcome good friends from numerous circles at dwelling and abroad come to cooperate!


Description

SV-602 is a 2-part structural epoxy adhesive developed for such application as dry fixing cladding. It has strong adhesion to metals, woods, reinforced plastics stone, ceramic and masonry. It is the best choice for bonding parts which must withstand weather, moisture and temperature fluctuations. SV-602 will adhere with minimum surface preparation and has a low coefficient of expansion.

 

Key Features

1. Room temperature curing Epoxy adhesive

2. Fast cure at room temperature, <40 min for reaching a tack-free status under standard environment (STD: 23℃, 50% humidity)

3. Mix ratio of 1:1 by volume or by weight

4. Good mechanical property

5. Bonds a wide variety of building materials

6. Good waterproofing and chemical resistance

 

Basic Application

1, the external walls of stone material, ceramic and other hang bond;

2, concrete, ceramics, stone, wood and other prefabricated split, bonding and jointing;

3, concrete, stone and so on crack repair;

4, the structure of the localization, anchor, reinforcement and reinforcement.

 

Technical data sheet

The following data is for reference only and is not recommended for the specification

Shear strength Stainless steel-stainless steel/Standard conditions ≥18   JC887-2001
Pressure shear strength Stone-stone/ Standard conditions ≥12
Stone-stone/ The freeze-thaw cycle 50 times ≥10
Stone – stainless steel/ Standard conditions ≥12
Standard conditions:Temperature=23℃,relative humidity=50%,48 hours curing
attribute SV-602-A SV-602-B SV-602(After mixing)
Colour gray white grey
Density(g/cm³) 1.8 1.8 1.8
Viscosity(PaS) 200-400 150-250  
Effective operating time(23℃) N/A N/A 20min
           

 

Certification

JC 887-2001

 

Color

Part A-Grey Paste/Part B-White Paste

 

Package

9kg/9kg per unit and 15kg/15kg per unit

 

Shelf life

12 months

 

Note

If you want the TDS or MSDS or other details, please contact with our sales person.

  • Previous:
  • Next:



  • If you would like to view this product or buy one for yourself you can do so here: https://amzn.to/2ddYF4q



    O-Lube Information: https://ph.parker.com/us/27601/en/general-purpose-barium-grease-lubricant-hydrocarbon-service-and-pneumatic-systems-under-200-psi-translucent-o-lube

    Super O-Lube Information: https://ph.parker.com/us/27601/en/high-viscosity-silicone-lubricant-general-purpose-and-high-pressure-pneumatic-translucent-super-o-lube

    Today we’re going to talk about lubrication of O-rings. Lubrication of O-rings is extremely important. The greatest benefit of using a lubricant is typically obtained during installation. Using a lubricant is going to decrease the surface friction of the O-ring helping to prevent abrasion, pinching or cutting of the O-ring during installation. Lubricating an O-ring can also help to seat the O-ring properly into the application, as well as aid and speed up automated assembly processes. The proper method of applying a lubricant to an O-ring always seems to be an area of concern for many of our customers and there are many methods used in the marketplace. One is to apply the lubricant to the O-ring using your fingers, your hand or a brush. Another is to dip the O-ring into a container of the lubricant. A third method commonly used is to dispense the O-ring lubricant into the seal packaging and use what we call the “shake and bake” method. The common goal of all of these different lubrication methods is to have a thin uniform film applied to the entire surface of the O-ring when completed. This will ease installation and provide best friction reduction.

    Parker offers the o-lube and super o-lube as well as many other surface treatments to aid in installation. Please visit www.parkerorings.com for more information on these products.

    Related Products

    WhatsApp Online Chat !