factory wholesale good quality SV-777 silicone sealant for stone for Belize Manufacturer

factory wholesale good quality SV-777 silicone sealant for stone for Belize Manufacturer
  • factory wholesale good quality SV-777 silicone sealant for stone for Belize Manufacturerfactory wholesale good quality SV-777 silicone sealant for stone for Belize Manufacturer
  • factory wholesale good quality SV-777 silicone sealant for stone for Belize Manufacturerfactory wholesale good quality SV-777 silicone sealant for stone for Belize Manufacturer
  • factory wholesale good quality SV-777 silicone sealant for stone for Belize Manufacturerfactory wholesale good quality SV-777 silicone sealant for stone for Belize Manufacturer

Short Description:

Description SV-777 silicone sealant for stone, is an elastomer sealant in modulus, single. Waterproof joints need to be sensitive to natural stone, glass and metal building clean appearance panel for sealing design, it to the moisture in the air after curing in contact, the formation of elastic rubber sealing performance, durability, weather resistance, good combination with most building materials.   Key Features 1. 100% silicone 2. Minimized fluid migration 3. Low dirt pick up 4. Water &...


Product Detail

Attentions

Application

Product Tags

Our goal is to provide high quality products at competitive prices, and top-notch service to customers around the world. We are ISO9001, CE, and GS certified and strictly adhere to their quality specifications for factory wholesale good quality SV-777 silicone sealant for stone for Belize Manufacturer, Welcome friends from all over the world come to visit, guide and negotiate.


Description

SV-777 silicone sealant for stone, is an elastomer sealant in modulus, single. Waterproof joints need to be sensitive to natural stone, glass and metal building clean appearance panel for sealing design, it to the moisture in the air after curing in contact, the formation of elastic rubber sealing performance, durability, weather resistance, good combination with most building materials.

 

Key Features

1. 100% silicone

2. Minimized fluid migration

3. Low dirt pick up

4. Water & weatherproof

5. Primerless adhesion to most building materials

6. 25% movement capability

 

Basic Application

1.Stone curtain wall sealing

2.Engineering ceramic sealing

3.Stone and other materials such as glass, metal seam sealing

4.Other uses

 

Technical data sheet

Test standard Test project Unit value
Before curing——25℃,50%R.H.
ASTM C 679 Flow, sagging or vertical flow mm 0
  VOC g/L <80
GB13477 surface drying time(25℃,50%R.H.) min 30
  Curing time(25℃,50%R.H.) Day 7-14
Sealant curing speed and operating time will have different with different temperatures and temperature, high temperature and high humidity can make sealant curing speed faster, rather low temperature and low humidity are slower.21 days after curing——25℃,50%R.H.
GB13477 Durometer Hardness Shore A 30
GB13477 The ultimate tensile strength Mpa 0.7
  Temperature stability -50~+150
GB13477 Movement capability % 25
ASTM C 1248 Pollution / oil, natural stone   No

 

Certification

25HM GB/T 23261-2009;ASTM C920-2011

 

Color

Black,White,Gray

 

Package

300ml in cartridge * 24 per box, 590ml in sausage *20 per box

 

Shelf life

12 months

 

Note

If you want the TDS or MSDS or other details, please contact with our sales person.

  • Previous:
  • Next:



  • Tired of boring drink coasters? Let’s design our own with just a few simple supplies. You will need a picture, some tiles, mod podge, felt and a brush!
    Email List Signup: https://householdhacker.tv/list

    Full Instructions:
    To pull this off we need a few basic items… a cutting board or scissors… Some mod lodge glue and sealant. a brush, some ceramic tiles and some felt.

    If you want a custom design print out a couple color pictures but leave enough room for about 4 and a half inches each. A standard piece of paper can hold a couple of these.

    We are using a standard 4×4 ceramic tile. These can be purchased at the hardware store for about 18 cents each!

    Print out your design and lets cut it up! You want to make a square that is 4 and 1/8th inches on all sides.

    Once you cut it up place it on the tile to make sure the measurements were correct. You want a little bit of white as a border.

    Now grab some mod lodge and apply a thin coat directly on to the tile. In a pinch you could use elmers glue but the top layer will not be as clean and good looking.

    At this point it’s good to mention that you don’t have to print anything, you can cut logos or pictures out of a magazine or old book to make your awesome coasters however you want… just follow the same process as before.

    Once the image is centered and secured into place. Apply a first top coat to the picture. Go slowly and steady here to avoid bubbles in the paper. Make a nice thin and straight layer and then give it at least 10 minutes to dry.

    After you have applied about 3 layers, you should have a nice water proof and flush looking coaster. It’s time to pad the bottom with felt to finish up the project.

    Get your felt out which can be purchased at any art store and cut it to the same size at the paper… That’s 4 1/8 inches on all sides. Now apply another thin layer of mod lodge or glue to the bottom and carefully place the felt into position.

    And that’s it! Once this process is completed, let everything dry for about an hour and they are ready for use! These things make great gifts for anyone.

    -~-~~-~~~-~~-~-
    NEWEST VIDEO: 10 Ways To Reuse Soda Cans In Your Home

    -~-~~-~~~-~~-~-



    Fun science stuff: https://astore.amazon.com/letogr-20?_encoding=UTF8&node=6
    Make your own bouncy ball. DIY How to make bouncy and stretchy polymer balls using Borax and school glue science experiment!

    Related Products

    WhatsApp Online Chat !