factory Outlets for Siway PU FOAM Export to kazan

factory Outlets for
 Siway PU FOAM Export to kazan
  • factory Outlets for
 Siway PU FOAM Export to kazanfactory Outlets for
 Siway PU FOAM Export to kazan
  • factory Outlets for
 Siway PU FOAM Export to kazanfactory Outlets for
 Siway PU FOAM Export to kazan
  • factory Outlets for
 Siway PU FOAM Export to kazanfactory Outlets for
 Siway PU FOAM Export to kazan

Short Description:

Description This product is the expansion, moisture curing, has the strong cohesiveness, elastic foam obturator structure; Save work to save time, reduce waste; High bond strength; Bubble can stick in the concrete, wood, metal, plastic, such as base material surface, but not including teflon, silicon resins;   Key Features 1. Noise silencing effect 2. Strong bonding strength 3. Water & weatherproof 4. Primerless adhesion to most building materials   Basic Application 1.Doors and Windows a...


Product Detail

Attentions

Application

Product Tags

The key to our success is "Good Product Quality, Reasonable Price and Efficient Service" for factory Outlets for Siway PU FOAM Export to kazan, We appreciate your enquiry and it's our honor to work with every friend worldwide.


Description

This product is the expansion, moisture curing, has the strong cohesiveness, elastic foam obturator structure; Save work to save time, reduce waste; High bond strength;

Bubble can stick in the concrete, wood, metal, plastic, such as base material surface, but not including teflon, silicon resins;

 

Key Features

1. Noise silencing effect

2. Strong bonding strength

3. Water & weatherproof

4. Primerless adhesion to most building materials

 

Basic Application

1.Doors and Windows and wall body between the gap filling sealing, fixed bond

2.Language lab, studio, etc when decorating, gap to fill

 

Technical data sheet

Project

Value

Density, Kg/m³,Not less

10

Thermal conductivity,35℃,W/(m·K) no more than

0.050

Dimensional stability(23±2)℃,48,h no more than

5

Operating temperature

-10~+35℃

Optimum operating temperature

+18~+25℃

Temperature range(After curing)

-35~+80℃

Tensile bond strength

kPa

Not less

Aluminum plate

Standard condition,7d

80

Immersion,7d

60

PVC plate

Standard condition,7d

80

Immersion,7d

60

Cement Plate

Standard condition,7d

60

Shear strength,kpa,Not less

80

Foam expansion ratio,Not less

Standard value-10

 

Certification

JC 936-2004

 

Color

White

 

Package

750ml in Bottle * 12 per box

 

Shelf life

12 months

 

Note

If you want the TDS or MSDS or other details, please contact with our sales person.

  • Previous:
  • Next:



  • This is how we did a CRACK INJECTION job to repair water leaks in CONCRETE for an underground garage.

    https://www.buildingservicesaustralia….

    We do polyurethane crack injection and remedial repairs to concrete. This particular job is just a small domestic job, garage actually. There is a leaking terrace from above and it has been leaking for some time apparently. The client has asked us to come so we can do about repairing it. We’ve done that. We’ve approached it from underneath because I don’t want to pull out the blue stamp paving from above.

    https://www.buildingservicesaustralia….

    THE PROCEDURE
     So we’ve drilled into the cracks below and the wall.
     We’ve inserted injector pins.
     Then we, under high pressure injected a polyurethane water reactive sealing. This sealing adds with the water that is already in the joint, reacts and blooms to about ten times its size. You can see the blooming there, on the yellow color that’s coming out of the actual joint, dragging the salts with it, which is the white salts, the kali chlorides, which is coming out of it and leaching out, which is good. So it’s a good reaction. This is on the wall.
     The pins have been driven to the wall, the yellow is blooming out and sealing up the joint as its blooming, doing a terrific job there.

    We usually leave that to see how effective it is. There are usually a couple leaks afterwards, after a couple of weeks.
    This is a shot here, we have returned.
    Procedure After We Returned After a Couple of Weeks
    There are still a couple of drips, so we:
     Re-injected and put a couple more pins in there, put some more material in there and solve the problem completely.
     Afterwards we cut all the pins off.
     Seal the ports off with polyurethane sealing and
     Give it a quick coat of cement screen, ready for painting.
    That’s it for now, we’ve finished the job, everybody’s happy and look, just want to say, thank you for listening and looking at the video.
    If you’d like to contact us, you can get us on

    https://www.buildingservicesaustralia….

    PHONE: 03 9897 4865

    https://www.youtube.com/watch?v=GcSeX…

    Related Products

    WhatsApp Online Chat !