Factory making Siway SV-602 Epoxy Structural Adhesive A/B Export to Italy

Factory making Siway SV-602 Epoxy Structural Adhesive A/B Export to Italy
  • Factory making Siway SV-602 Epoxy Structural Adhesive A/B Export to ItalyFactory making Siway SV-602 Epoxy Structural Adhesive A/B Export to Italy

Short Description:

Description SV-602 is a 2-part structural epoxy adhesive developed for such application as dry fixing cladding. It has strong adhesion to metals, woods, reinforced plastics stone, ceramic and masonry. It is the best choice for bonding parts which must withstand weather, moisture and temperature fluctuations. SV-602 will adhere with minimum surface preparation and has a low coefficient of expansion.   Key Features 1. Room temperature curing Epoxy adhesive 2. Fast cure at room temperature,...


Product Detail

Attentions

Application

Product Tags

We will make every effort to be outstanding and perfect, and accelerate our steps for standing in the rank of international top-grade and high-tech enterprises for Factory making Siway SV-602 Epoxy Structural Adhesive A/B Export to Italy, We are always looking forward to forming successful business relationships with new clients around the world.


Description

SV-602 is a 2-part structural epoxy adhesive developed for such application as dry fixing cladding. It has strong adhesion to metals, woods, reinforced plastics stone, ceramic and masonry. It is the best choice for bonding parts which must withstand weather, moisture and temperature fluctuations. SV-602 will adhere with minimum surface preparation and has a low coefficient of expansion.

 

Key Features

1. Room temperature curing Epoxy adhesive

2. Fast cure at room temperature, <40 min for reaching a tack-free status under standard environment (STD: 23℃, 50% humidity)

3. Mix ratio of 1:1 by volume or by weight

4. Good mechanical property

5. Bonds a wide variety of building materials

6. Good waterproofing and chemical resistance

 

Basic Application

1, the external walls of stone material, ceramic and other hang bond;

2, concrete, ceramics, stone, wood and other prefabricated split, bonding and jointing;

3, concrete, stone and so on crack repair;

4, the structure of the localization, anchor, reinforcement and reinforcement.

 

Technical data sheet

The following data is for reference only and is not recommended for the specification

Shear strength Stainless steel-stainless steel/Standard conditions ≥18   JC887-2001
Pressure shear strength Stone-stone/ Standard conditions ≥12
Stone-stone/ The freeze-thaw cycle 50 times ≥10
Stone – stainless steel/ Standard conditions ≥12
Standard conditions:Temperature=23℃,relative humidity=50%,48 hours curing
attribute SV-602-A SV-602-B SV-602(After mixing)
Colour gray white grey
Density(g/cm³) 1.8 1.8 1.8
Viscosity(PaS) 200-400 150-250  
Effective operating time(23℃) N/A N/A 20min
           

 

Certification

JC 887-2001

 

Color

Part A-Grey Paste/Part B-White Paste

 

Package

9kg/9kg per unit and 15kg/15kg per unit

 

Shelf life

12 months

 

Note

If you want the TDS or MSDS or other details, please contact with our sales person.

  • Previous:
  • Next:



  • This installation video shows how to attach thermal insulation, in this case rock wool and mineral wool insulation boards, using adhesive in 2 different ways:

    - Full-surface adhesion of the rock wool insulation board
    - Spot-edge adhesion

    Depending on the substrate, wind loads, building heights etc., the insulation boards need to be dowelled after having been attached.

    More info on EIFS / EWIS from Sto:

    https://www.sto.com/102012_EN-Sto_international.htm



    Silicone sealant is the most commonly used product for sealing corners on tiled areas, around showers, baths & basins, around worktops, wall & floor joints, door & window frames. However, the application of silicone sealant usually requires a relatively high level of skill to achieve a consistent quality of finish. If applied incorrectly the joint will look poor and waterproofing may be compromised.

    Seal Rite — The New Sealant Masking System from Everbuild Building Products is a dispenser and micro-fine foil masking tape which enables both Tradesmen and DIY’ers to achieve a perfectly finished joint every time, without any level of skill, eliminating both mess and wastage. This new system is designed particularly with corner joints in bathroom/kitchen applications in mind, but equally it can also be used in various other areas.

    The unique adjustable dispenser, which has a patent pending, allows the joint width to be adjusted using the outer wheel of the product — both of these outer sides move simultaneously so that when applied the tape is positioned offset from the wall by the chosen number of millimetres. There are six joint size options ranging from 4mm to 9mm (in 1mm increments).

    Once the joint size has been selected it is easy to run the dispenser down one side of the corner joint, nipping off the tape when the bottom is reached, with the handy cutting blade built into the dispenser. The same is then repeated on the adjoining wall to create the parallel lines to apply the sealant. Once this has been done, the Everbuild Smooth-Out Tool should be used to smooth down the joint before the tape is pulled off leaving The Perfect Seal Everytime.

    For more information on the Seal Rite range or any other product within the Everbuild range please contact your Everbuild Sales Representative, or contact the Everbuild Sales Office on 0113 240 2424. The Seal Rite video is also available to watch on the Everbuild website, www.everbuild.co.uk

    Related Products

    WhatsApp Online Chat !