Factory For SV-311 Polyurethane Sealant for Construction for Hungary Factory

Factory For
 SV-311 Polyurethane Sealant for Construction for Hungary Factory
  • Factory For
 SV-311 Polyurethane Sealant for Construction for Hungary FactoryFactory For
 SV-311 Polyurethane Sealant for Construction for Hungary Factory
  • Factory For
 SV-311 Polyurethane Sealant for Construction for Hungary FactoryFactory For
 SV-311 Polyurethane Sealant for Construction for Hungary Factory

Short Description:

Description SV-311  is a one component polyurethane high modulus flexible sealant formulated as reliable bonding adhesive and joint sealant for construction industry, particularly where a higher modulus and lower movement capacity are required for joints with low or medium movement, e.g. connection joints between floor/stairs and wall, connection joints between floor and machinery, seam sealing / sealing of pipe ducts / ventilation systems, multipurpose joints in metal and wood construction w...


Product Detail

Attentions

Application

Product Tags

We keep improving and perfecting our products and service. At the same time, we work actively to do research and development for Factory For SV-311 Polyurethane Sealant for Construction for Hungary Factory, We sincerely welcome both foreign and domestic business partners, and hope to work with you in the near future!


Description

SV-311  is a one component polyurethane high modulus flexible sealant formulated as reliable bonding adhesive and joint sealant for construction industry, particularly where a higher modulus and lower movement capacity are required for joints with low or medium movement, e.g. connection joints between floor/stairs and wall, connection joints between floor and machinery, seam sealing / sealing of pipe ducts / ventilation systems, multipurpose joints in metal and wood construction work.

 

Key Features

1. Non-sag consistency 

2. Excellent adhesion to most common building materials

3. High tear strength 

4. High tensile strength

5. Less fluid migration to porous material

 

Technical data sheet
Test standard Test project Unit value
GB13477 density g/m³ 1.20±0.1
GB13477 Flow, sagging or vertical flow mm 0
GB13477 surface drying time(25℃,50%R.H.) min 30
  Curing speed mm/24h 3
GB13477 Durometer Hardness Shore A 25-35
GB13477 100% tensile strength Mpa ≤0.4
GB13477 The elastic recovery rate % 80
  Maximum seam width mm 35
  Minimum seam width mm 8

Color

White, black, grey

 

Package

300ml plastic cartridges and 600ml in sausage

 

Shelf life

9 months 

 

Note

If you want the TDS or MSDS or other details, please contact with our sales person.

  • Previous:
  • Next:



  • William Collins with Energy Design Group Enterprises demonstration the Com-Ten Adhesion Testing on the Tytan Pro Outdoor & Auto foam sealant which was sprayed by the Spray Pod Maxi and the Spray Pods Gun.

    Adhesion is the bond strength measurement of a sealant to a substrate. When an adhesive is bonded to an item or surface, numerous physical, mechanical and chemical forces come into play, which may have an effect on each other. These need to be tested before a product can be used. Adhesion testing, some times called pull test can determine the bond strength of almost any sealant.

    TYTAN PRO Outdoor & Auto is an innovative, low-pressure, formula that seals and insulates with a water and airtight seal. It is specifically formulated for outdoor use and is black in color so it won’t discolor if exposed to UV radiation. It is resistant to heat and reduces noise pollution in Autos. The black color blends in with black undercarriages and auto wiring and pipes. Its watertight seal is perfect for Koi Ponds or waterfalls and it is safe to be used around Koi Fish. It has premium adhesion abilities to most construction materials including: wood, metal, masonry, glass, and most plastics so outdoor weather conditions and typical auto vibrations won’t harm the seal.

    To plug into Spray Sealants Blog, visit https://www.SpraySealants.com

    Related Products

    WhatsApp Online Chat !