Factory directly supply SV-8800 Silicone Sealant for Insulating Glass to Kenya Factories

Factory directly supply
 SV-8800 Silicone Sealant for Insulating Glass to Kenya Factories
  • Factory directly supply
 SV-8800 Silicone Sealant for Insulating Glass to Kenya FactoriesFactory directly supply
 SV-8800 Silicone Sealant for Insulating Glass to Kenya Factories
  • Factory directly supply
 SV-8800 Silicone Sealant for Insulating Glass to Kenya FactoriesFactory directly supply
 SV-8800 Silicone Sealant for Insulating Glass to Kenya Factories
  • Factory directly supply
 SV-8800 Silicone Sealant for Insulating Glass to Kenya FactoriesFactory directly supply
 SV-8800 Silicone Sealant for Insulating Glass to Kenya Factories

Short Description:

Description SV-8800 is two components, high modulus; neutral curing silicone sealant specifically developed for assembly of high performance insulated glass units as secondary sealing material.   Where to use It is a two-component silicone that offers variable work life with high bonding strength to maintain the integrity of insulating glass unit, suits both commercial and residential IGU.   Key Features 1. High Modulus 2. UV resistance 3. Low vapor and gas transmission 4. Primerless adhesion...


Product Detail

Attentions

Application

Product Tags

We aim to find out quality disfigurement from the production and supply the best service to domestic and overseas customers wholeheartedly for Factory directly supply SV-8800 Silicone Sealant for Insulating Glass to Kenya Factories, We sincerely welcome you come to visit us. Hope we have good cooperation in the future.


Description

SV-8800 is two components, high modulus; neutral curing silicone sealant specifically developed for assembly of high performance insulated glass units as secondary sealing material.

 

Where to use

It is a two-component silicone that offers variable work life with high bonding strength to maintain the integrity of insulating glass unit, suits both commercial and residential IGU.

 

Key Features

1. High Modulus

2. UV resistance

3. Low vapor and gas transmission

4. Primerless adhesion to coated glass

5. 100% compatible to SV-8890

 

Technical data sheet

Test standard Test project Unit value
Before curing——25℃,50%R.H.
GB13477 Specific gravity(After mixing)   1.33
GB13477 Operating time min 20-40
GB13477 surface drying time(25℃,50%R.H.) min 80-188
corrosivity     No
7 days after curing——25℃,50%R.H.
GB/T 531 Durometer Hardness Shore A 40
GB13477 The tensile modulus at 12.5% elongation Mpa 0.18
  The ultimate tensile strength Mpa 0.92
GB13477 Elongation limit (fracture) % 150

 

Certification

GB-24266-2009;

 

Color

Component A(Base) – White, Component B(Catalyst)- Black

 

Package

1. Component A(Base): (190L), Component B(Catalyst) (18.5L)

2. Component A(Base):24.5kg (18L), Component B(Catalyst): 1.9kg (1.8L)

 

Shelf life

12 months

 

Note

If you want the TDS or MSDS or other details, please contact with our sales person.

  • Previous:
  • Next:



  • Blew my sunroof off so I used the great stuff to raise it an inch cause I need to bring it up closer to the top of the car so when I add the silicone it I dont have to use 5 tubes



    Thought I’d do a quick tutorial of something I’ve been messing with. This is how to use silicone caulk (as in the type you buy at the hardware store) to make a mold of something. Since silicone bonds to very little, it works great! I prefer this to latex molds.

    For quick reference, to make the material for the mold, use silicone I caulk (DO NOT USE SILICONE II), acrylic paint, and glycerin. The ratio for mixing that works best is 1 ounce of silicone, a dab of paint (I’d say a drop, but the acrylic never comes out in drop form), and 3-4 drops of glycerin. More glycerin can be used, but the more you add of the glycerin, the quicker the silicone will start to dry and the stiffer it will become, so be careful and work quickly!

    I made this specifically with fursuiters in mind, especially those who like adding realistic follow-me eyes in their heads, but maybe can’t find a good mold to use to make resin eyes. But it can be used for many type of molds. If you are unsure if the silicone will work, do a small test with a tiny bit of the silicone mixture. I’ve managed to pull the silicone off of a variety of things (wood, metal, plastics) but it’s always better to be safe than sorry.

    Forgot to mention in the video, but silicone, once dry, can be cut very easily with scissors, so you can use it for a variety of projects, and trim up your molds to look prettier than mine.

    Split into two parts because Youtube wouldn’t accept one large video.
    Part 1: https://www.youtube.com/watch?v=cmgUhdSqgtU

    Related Products

    WhatsApp Online Chat !