factory customized Siway SV-602 Epoxy Structural Adhesive A/B for Vietnam Manufacturers
Description SV-602 is a 2-part structural epoxy adhesive developed for such application as dry fixing cladding. It has strong adhesion to metals, woods, reinforced plastics stone, ceramic and masonry. It is the best choice for bonding parts which must withstand weather, moisture and temperature fluctuations. SV-602 will adhere with minimum surface preparation and has a low coefficient of expansion. Key Features 1. Room temperature curing Epoxy adhesive 2. Fast cure at room temperature,...
We insist on the principle of development of 'High quality, Efficiency, Sincerity and Down-to-earth working approach' to provide you with excellent service of processing for factory customized Siway SV-602 Epoxy Structural Adhesive A/B for Vietnam Manufacturers, We, with great passion and faithfulness, are willing to provide you with perfect services and striding forward with you to create a bright future.
SV-602 is a 2-part structural epoxy adhesive developed for such application as dry fixing cladding. It has strong adhesion to metals, woods, reinforced plastics stone, ceramic and masonry. It is the best choice for bonding parts which must withstand weather, moisture and temperature fluctuations. SV-602 will adhere with minimum surface preparation and has a low coefficient of expansion.
1. Room temperature curing Epoxy adhesive
2. Fast cure at room temperature, <40 min for reaching a tack-free status under standard environment (STD: 23℃, 50% humidity)
3. Mix ratio of 1:1 by volume or by weight
4. Good mechanical property
5. Bonds a wide variety of building materials
6. Good waterproofing and chemical resistance
1, the external walls of stone material, ceramic and other hang bond;
2, concrete, ceramics, stone, wood and other prefabricated split, bonding and jointing;
3, concrete, stone and so on crack repair;
4, the structure of the localization, anchor, reinforcement and reinforcement.
Technical data sheet
The following data is for reference only and is not recommended for the specification
|Shear strength||Stainless steel-stainless steel/Standard conditions||≥18||JC887-2001|
|Pressure shear strength||Stone-stone/ Standard conditions||≥12|
|Stone-stone/ The freeze-thaw cycle 50 times||≥10|
|Stone – stainless steel/ Standard conditions||≥12|
|Standard conditions：Temperature=23℃，relative humidity=50%，48 hours curing|
|Effective operating time(23℃)||N/A||N/A||20min|
Part A-Grey Paste/Part B-White Paste
9kg/9kg per unit and 15kg/15kg per unit
If you want the TDS or MSDS or other details, please contact with our sales person.
Check out our blog for more details about this DIY!
Things you will need:
- Stock tank
- Above Ground Pool Pump (https://www.amazon.com/gp/product/B005QIYMNM/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B005QIYMNM&linkCode=as2&tag=heywanderer-20&linkId=eb02a0f70f7346365cb3605526c762a1)
- Weatherproof Silicone Sealant (https://www.amazon.com/gp/product/B0000CBJ7W/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B0000CBJ7W&linkCode=as2&tag=heywanderer-20&linkId=fed3bf25655f953f9dffe6f5a7125b41)
- Hole Saw with Arbor (https://www.amazon.com/gp/product/B00N41ECXI/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B00N41ECXI&linkCode=as2&tag=heywanderer-20&linkId=53e5f5258cb8b72c0e3d0de148b30929)
- Plunger Valves (https://www.amazon.com/gp/product/B00EIMRZGS/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B00EIMRZGS&linkCode=as2&tag=heywanderer-20&linkId=892e868c1267ff7ffd6407c597d557eb)”
- Pool Outlet (https://www.amazon.com/gp/product/B004S7QQ2M/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B004S7QQ2M&linkCode=as2&tag=heywanderer-20&linkId=108da486037248ed5399ade919e504e9)
- 1-3 Rubber Washers (or Gaskets) (https://www.intexcorp.com/10255.html)
- Strainer Nut (https://www.intexcorp.com/10256.html)
Other things you will need for maintenance:
- Chlorine Tablets (https://www.amazon.com/gp/product/B00PZZFQKY/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B00PZZFQKY&linkCode=as2&tag=heywanderer-20&linkId=dd445281975e0f88f1840b8924aabc5c
- Floating Pool Dispensert (https://www.amazon.com/gp/product/B000P5A4R4/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B000P5A4R4&linkCode=as2&tag=heywanderer-20&linkId=8aa8479f61243a92ea124f1d9423f376
- Water Testing Kit (https://www.amazon.com/gp/product/B0038YL4M8/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B0038YL4M8&linkCode=as2&tag=heywanderer-20&linkId=b233a993b3d0993b7de815a339d3e7da
Step 1- Find a nice level area to lay the stock tank on. If the area where you have chosen isn’t level, use sand or rocks to build up whatever side needs it. It is very important that your stock tank be level so there aren’t any unexpected leaks.
Step 2- Cut holes in your stock tank. I’m not going to lie- this is a pain in the butt. We bought a hole saw with an arbor and it took two people to get through the metal. You will need two holes, one at the top and one at the bottom. In an above ground pool, these aren’t usually right on top of each other, but ours are. We haven’t ever seen this as a problem.
Step 3- Start assembling the parts. In the pool pump package there is a packet with instructions, warnings and troubleshooting. This packet proved to be vital in the setup of the pool. I did end up getting 2 gaskets for the bottom section (the drain section), one for the inside of the pool and one for the outside. It only says you need one for the inside, but this was causing a drip for us. I also put thread seal tape around the connections that were closest to the pool. There are a lot of connections, and each one has a gasket, so you could probably get away without the tape. I didn’t put it on all the connections, the only ones that really seemed to matter were the ones that are connecting the hoses to the pool.
Step 4- Apply silicone waterproof sealant around all crevices involving the input and output parts. I did this on the inside of the pool and the outside. And I applied it VERY HEAVILY and did two layers, allowing one to dry before the second was applied. Sealing these crevices is one of the most important parts. This is what is going to keep the water in the pool. Well all of these steps are leading up to keeping water in the pool, but if there is any chance that it’s going to be getting out, this is what will save you.
Step 5- Test for leaks. Before I added water to the pool, I took a water bottle and poured a good amount of water on the input and output parts. You could also just use a water hose. I would make sure the hose wasn’t on full blast. You don’t want to accidentally penetrate the sealant.
Step 6- Once you are sure there aren’t any leaks, fill the pool just above the bottom hole/output. Check again to see if any leaks have started. If there aren’t any, fill the rest of the pool up!
Step 7- Turn the pump on. Make sure both plunger valves are open/unlocked. When you first do this water may not come out of the output, but there is a solution! Twist off the knob on top of the filter pump to let some air out. Some water may escape too and that’s okay, just be ready to screw it back on as soon as the water starts coming out.
Be sure to check us out at https://www.workshopaddict.com where we love talking about tools and seeing your shop projects.
Milwaukee 18V Cordless Caulk/Adhesive Gun with 10 oz. Carriage, a powerful applicator that delivers incredible pushing force for the toughest applications. Providing the highest level of control, it’s designed with a variable speed trigger for precise and accurate material application. Milwaukee built all metal gears offer an industry leading 950 lbs. of force for the highest viscosity materials, and Constant Flow Technology (CFT) eliminates motor oscillation resulting in steady material dispensing and even beads at all viscosity levels. Powered by Milwaukee M18 Lithium-Ion batteries, over 200 tubes of 10 oz. construction adhesive can be dispensed off one battery charge.