Factory Cheap Siway SV-602 Epoxy Structural Adhesive A/B to Mombasa Importers
Description SV-602 is a 2-part structural epoxy adhesive developed for such application as dry fixing cladding. It has strong adhesion to metals, woods, reinforced plastics stone, ceramic and masonry. It is the best choice for bonding parts which must withstand weather, moisture and temperature fluctuations. SV-602 will adhere with minimum surface preparation and has a low coefficient of expansion. Key Features 1. Room temperature curing Epoxy adhesive 2. Fast cure at room temperature,...
Our advantages are lower prices,dynamic sales team,specialized QC,strong factories,high quality products and services for Factory Cheap Siway SV-602 Epoxy Structural Adhesive A/B to Mombasa Importers, We welcome customers, business associations and friends from all parts of the world to contact us and seek cooperation for mutual benefits.
SV-602 is a 2-part structural epoxy adhesive developed for such application as dry fixing cladding. It has strong adhesion to metals, woods, reinforced plastics stone, ceramic and masonry. It is the best choice for bonding parts which must withstand weather, moisture and temperature fluctuations. SV-602 will adhere with minimum surface preparation and has a low coefficient of expansion.
1. Room temperature curing Epoxy adhesive
2. Fast cure at room temperature, <40 min for reaching a tack-free status under standard environment (STD: 23℃, 50% humidity)
3. Mix ratio of 1:1 by volume or by weight
4. Good mechanical property
5. Bonds a wide variety of building materials
6. Good waterproofing and chemical resistance
1, the external walls of stone material, ceramic and other hang bond;
2, concrete, ceramics, stone, wood and other prefabricated split, bonding and jointing;
3, concrete, stone and so on crack repair;
4, the structure of the localization, anchor, reinforcement and reinforcement.
Technical data sheet
The following data is for reference only and is not recommended for the specification
|Shear strength||Stainless steel-stainless steel/Standard conditions||≥18||JC887-2001|
|Pressure shear strength||Stone-stone/ Standard conditions||≥12|
|Stone-stone/ The freeze-thaw cycle 50 times||≥10|
|Stone – stainless steel/ Standard conditions||≥12|
|Standard conditions：Temperature=23℃，relative humidity=50%，48 hours curing|
|Effective operating time(23℃)||N/A||N/A||20min|
Part A-Grey Paste/Part B-White Paste
9kg/9kg per unit and 15kg/15kg per unit
If you want the TDS or MSDS or other details, please contact with our sales person.
Hey guys!! A lot of you asked me to make more color changing things, so today I bring you this super cool and really easy color changing phone case!
The first thing you will need is some sticker or adhesive paper. You can find this at any craft store. Take any phone case that fits your phone, it doesn’t have to be transparent or anything and trace the outline on the paper, don’t make it perfect, it’s just a guide.
I’m going to use some color changing paint mixed with some color changing pigment to make the effect stronger:
In ebay spain:
In ebay.com (lots of options):
So I’m just mixing a little bit of both and painting on the sticker paper. Let it dry before adding a second layer, and you can also add a layer of mod podge or varnish to protect it and make it shiny.
After letting everything dry, trace the outline of your phone case again including the camera holes and stuff and cut it out!
Then just stick it to your phone case and that’s it! You can try and paint directly onto the phone case too, but I wanted something a little less permanent. Now let’s try it out!
As you see, it works fine and the finger prints left have a lot of detail! This is how it looks cold and hot. And it will also tell you if your phone is heating up too much from charging!
Music by: let’s go! by CMA
Overlays by Gabrielle Marie at: https://www.youtube.com/user/GlamSolu…
Now I have a P.O. box (don’t write DIYlover or anything just this):
APARTADO DE CORREOS 3017
20002 DONOSTIA (GIPUZKOA)
More DIYlover at:
VT Vacuum Curing and Debulking Table
Dual display shows set-point and actual process temperature
Multiple ramp / soak steps option
Automatic tuning of PID parameters
Programmable to either ° C or ° F
Program security lock capabilities
Sensor break protection
Highly durable and uniform multi-stranded heating element for even heat distribution
Heater break protection
2 stage electric oil-less rocker piston vacuum pump
High tear strength, reversion resistant silicone rubber reusable vacuum bag with 800% elongation factor
Greatly reduces setup time
Safety interlocked push buttons ensure both hands are on the operating console while the lid is in motion
Dual ball screw actuators for positive lid movement
Your choice of 3-phase 200VAC, 208VAC, 240VAC, 277VAC, and 480VAC
All systems are fuse protected
BriskHeat Vacuum Curing and Debulking Table:
Heat and vacuum in one easy step for debulking and curing composite parts. Single setup greatly reduces overall time and cost associated with traditional debulking and autoclave curing. Reusable and highly stretchable vacuum bag membrane form fits around your part. Curing temperatures up to 400 degrees F (204 degrees C). Acheive temperatures up to 600 degrees F on vacuum tables without lid (manual bagging lay-up required). Temperature Control: Dual display shows set-point and actual process temperature. Multiple ramp / soak steps option. Automatic tuning of PID parameters. Programmable to either degrees C or degrees F. Audible alarm. Program security lock capabilities. Sensor break protection. Heating System: Highly durable and uniform multi-stranded heating element for even heat distribution. Heater break protection. Vacuum System: 2 stage electric oil-less rocker piston vacuum pump. Retractable Lid. High tear strength, reversion resistant silicone rubber reusable vacuum bag with 800 percent elongation factor. Greatly reduces setup time. Safety interlocked push buttons ensure both hands are on the operating console while the lid is in motion. Dual ball screw actuators for positive lid movement. Power: Your choice of 3-phase 200VAC, 208VAC, 240VAC, 277VAC, and 480VAC. All systems are fuse protected. BriskHeat Vacuum Curing / Debulking Tables can be configured-to-order for your application. Please contact us for assistance and a quotation. Standard Table Sizes: VT4000: 60″ x 66″ total, 52″ x 56″ useable area: Single heat zone. VT8000: 60″ x 132″ total, 52″ x 124″ useable area: Two heat zones. VT10000: 72″ x 144″ total, 66″ x 138″ useable area: Two heat zones. Table Configuration Options: All table configurations include electric vacuum pump. A: Heated table without a retractable lid. Includes basic temperature control. (Manual bagging lay-up required). B: Heated table with a retractable lid. Includes basic temperature control. C: Heated table with a retractable lid. Includes ramp / soak temperature control. D: Heated table with a retractable lid. Includes ramp / soak temperature control and 16-channel monitor system. E: Heated table with a retractable lid. Includes ramp / soak temperature control, 16-channel monitor system, and digital data logger. Voltage Choices: 1: 200VAC, 3-phase. 2: 240VAC, 3-phase. 3: 208VAC, 3-phase. 4: 480VAC, 3-phase. 5: 277VAC, 3-phase. Please BriskHeat for assistance and a quotation.