China Professional Supplier SV-311 Polyurethane Sealant for Construction to Houston Importers

With a positive and progressive attitude to customer's interest, our company continuously improves our product quality to meet the needs of customers and further focuses on safety, reliability, environmental requirements, and innovation of
China Professional Supplier SV-311 Polyurethane Sealant for Construction to Houston Importers, "Create Values,Serving Customer!" is the aim we pursue. We sincerely hope that all customers will establish long term and mutually beneficial cooperation with us.If you wish to get more details about our company, Please contact with us now

Description

SV-311  is a one component polyurethane high modulus flexible sealant formulated as reliable bonding adhesive and joint sealant for construction industry, particularly where a higher modulus and lower movement capacity are required for joints with low or medium movement, e.g. connection joints between floor/stairs and wall, connection joints between floor and machinery, seam sealing / sealing of pipe ducts / ventilation systems, multipurpose joints in metal and wood construction work.

Key Features

1. Non-sag consistency 

2. Excellent adhesion to most common building materials

3. High tear strength 

4. High tensile strength

5. Less fluid migration to porous material

Technical data sheet

Color

White, black, grey

Package

300ml plastic cartridges and 600ml in sausage

Shelf life

9 months 

Note

If you want the TDS or MSDS or other details, please contact with our sales person.

In this video, I test the strength of four different glues and adhesives. These tests aren’t exactly scientific but I wanted more of a “real world” test because I’m making UAV/quadcopter frames and you never know how you’re going to crash.

ABOUT THE TESTS
I made 4 wood frames from 1/16″ thick birch plywood. This is the same wood that I’m using to sandwich in between layers of carbon fiber in my frames. Glued to the bottom of each frame is 0.008″ thick woven carbon fiber sheet. This is very thin, lightweight stuff and all 4 pieces came from the same sheet.

The carbon fiber sheet was sanded and all surfaces were cleaned thoroughly. All adhesives were mixed and applied according to their instructions.

TEST 1 – BSI 30 Minute Slow Cure Epoxy
BSI stands for Bob Smith Industries. This epoxy is sold in many hobby stores and I seen videos where people rave about how good it is. For this application it was the worst. While it is slightly flexible after it cures, its still brittle. All I had to do was crack a corner and I easily peeled off the carbon fiber with hardly any effort. This stuff is not going to work well with a frame that’s constantly flexing and its not going to hold up at all in a crash.

TEST 2 – Loctite CA Professional
I’ve heard good things about using CA (Cyanoacrylate or “Super Glue”) on carbon fiber but you can’t trust everything you read on the internet. I used CA quite a bit on my micro quads but I was gluing wood and plastic. Here, it was a tiny bit better than the BSI epoxy, but not much. It took a little more effort to separate the carbon fiber but once it started peeling away, it was the end. Just like hard epoxy, CA is too brittle and can’t handle flexing.

TEST 3 – JB WELD Clear Weld
This 2 part epoxy is a COMPLETELY different product from the original JB Weld. This is a 5 minute epoxy that comes in a handy syringe style applicator. I’ve always heard quick drying epoxies are brittle but this stuff remains very flexible! When I tried to peel a corner, it resisted quite well, to the point where the wood started to split first. I really was struggling to peel the carbon fiber away. The carbon fiber actually ripped before I could peel the entire piece away. Remember, I was using very thin carbon fiber sheet for these tests. When I peeled the last piece off, you can see the wood itself had separated, not the bond between the carbon fiber and wood.

I would certainly recommend this product when you need to fix something in the field or you need to glue something that isn’t critical. The problem with gluing more complex things like a frame, is that it hardens too quickly.

TEST 4 – 3M EC2216 Epoxy
This stuff is pretty amazing but it has its drawbacks. First, its expensive. Its around $20 for a 1.45 oz tube. Also, it dries very slowly- 24 hours for handling strength and 7 days for full strength. All that aside, you can see how well it held up in my test. When I tried to peel a corner, it took considerable effort to do any damage and then the carbon fiber sheet ripped. I was able to tear the entire edge away while the remaining carbon fiber was still firmly attached to the wood. I tried it on the other end and the same thing happened. I ended up having to break the frame to get enough leverage to separate the wood from the carbon fiber. You can see me twisting one piece of wood all the way around and the bond still holds. This is an amazing adhesive.

NOT SHOWN IN THIS VIDEO
I had already tested 2 other glues that aren’t in this video because I didn’t want to waste more carbon fiber. I tested regular JB Weld and its too brittle. It behaved in a similar way to the BSI epoxy. I also tested Gorilla Glue. While its a great glue for foam and wood, it does not stick to carbon fiber at all.

If you’ve been following my videos, you know I’ve built a replacement frame for my QAV400 that weighs less than half of the original frame but lacks torsional stiffness. I’m currently testing several designs for a strong, light frame that has good torsional properties as well. To follow along as I build new frames, see my QAV400 mods log:

https://diydrones.com/forum/topics/qav400-mods-to-increase-flight-time

If you’re planning to build a stock QAV400, its a great quad! Here’s my original build log that uses all of the factory parts:

https://fpvlab.com/forums/showthread.php?33317-Rob215-s-QAV400-Build

Current Specs:
- DIY carbon fiber lower frame / Lumenier QAV400 upper frame
- Lumenier FX2216-9 1100KV motors
- Lumenier 30A SimonK ESCs
- APM 2.6 flight controller with uBlox GPS/compass kit
- 3D Robotics telemetry radio
- FrSky X8R 2.4GHz receiver
- Graupner 9×5 E-Props
- QAV Quick-mount 2-axis brushless gimbal
- GoPro Hero3 Black camera
- Lumenier CS-600 FPV camera
- Flytron TVS-2 remote camera switch
- MinimOSD
- ImmersionRC 5.8GHz 600mw Tx
- ImmersionRC Uno 5800 V2 Rx
- IBCrazy 5.8GHz Bluebeam Ultra antennas
- Lumenier 5200mAh 4S battery

Thanks for watching! Please Subscribe!! =)

With Aquaseal by M Essentials, you can easily repair tears and rips in your favorite wetsuit, and other watersports gear. Aquaseal is a clear, waterproof adhesive and sealant, specially formulated for the flexibility, adhesion and abrasion protection you need when you’re in the water.

Don’t let a rip or a tear stop you. Aquaseal will patch that hole in your neoprene, fix the gash in your drysuit, even make an abrasion patch.

Aquaseal is all you need to keep your gear going as long as you do.

Check out our repair guide for more tips and information at www.mcnett.com/messentials