Best quality and factory SMP-333 Industrial silane modified polyether sealant Wholesale to France
Description SMP333 Industrial Silane Modified Polyether Sealant is a transparent single component, high performance, neutral curing adhesive. The product is green and does not contain toxic and harmful substances. It has good bonding ability for most substrates such as metal, ceramics, wood, polyvinyl chloride (PVC) and polycarbonate (PC). After curing, the surface can be coated and can be widely Used in a variety of train / bus / car and other motor vehicles, elevator cars, containers, machi...
With a sound business credit, excellent after-sales service and modern manufacturing facilities, we have earned an excellent reputation among our customers across the world for Best quality and factory SMP-333 Industrial silane modified polyether sealant Wholesale to France, As we are moving forward, we keep an eye on our ever-expanding product range and make improvement to our services.
SMP333 Industrial Silane Modified Polyether Sealant is a transparent single component, high performance, neutral curing adhesive. The product is green and does not contain toxic and harmful substances. It has good bonding ability for most substrates such as metal, ceramics, wood, polyvinyl chloride (PVC) and polycarbonate (PC). After curing, the surface can be coated and can be widely Used in a variety of train / bus / car and other motor vehicles, elevator cars, containers, machinery and equipment, electrical equipment and other areas of the adhesive seal.
1.Environmental protection products: fast curing, low VOC, non-toxic and tasteless, non-polluting substrate, no corrosion.
2.The surface can be painted: the surface can be sprayed after the surface coating paint color.
3.Good operability: one-component, easy to operate, in the 4 ℃ ~ 40 ℃ temperature range has a good extrudability, with a plastic gun extrusion can be directly.
4.Excellent adhesion: with metal, ceramics, wood and PVC, PC, PA and other materials with excellent adhesion, without the use of primer.
5.Excellent weather resistance, aging resistance, dielectric and mechanical properties.
Where to use
Train / bus / car and other motor vehicle body, interior, floor, air conditioning and other systems of bonding and sealing.
Mobile phones, tablet PCs, navigators, digital cameras and other electrical equipment bonding seal.
Containers, elevator cars, ventilation equipment, such as seams sealed.
Electronics, machinery, ships and other areas of the adhesive seal.
Other suitable for this product in the field of bonding and sealing purposes.
Technical data sheet
|Test standard||Test project||Unit||value|
|coloer||Black, white, gray|
|GB13477||surface drying time（25℃，50%R.H.）||min||15-60|
|GB528||Elongation at break||%||600|
300ml in cartridge * 24 per box, 500ml in sausage *20 per box
If you want the TDS or MSDS or other details, please contact with our sales person.
Making a Cavity Pour Mold with Mold Max 30 RTV Silicone Rubber from Smooth-On.
Our model is a hand-carved hard wood 3-dimensional figure. Drill an air release hole in to the middle of a baseboard. Secure model to baseboard with screws. Apply plastic wrap to the original model to protect the surface. Cover the model with 1/2-inch (1.3 cm) clay blanket. Create a 2-inch (5.1 cm) flange for registration. Build a 3-inch (7.6 cm) clay dividing wall and apply clay supports. Drill indentations in the baseboard to register shell. Build a clay pour spout and a 1/2-inch clay dam. Apply Sonite Wax to baseboard and then apply Ease Release 200 to the entire surface.
Measure and mix duoMatrix NEO with a mix ratio of 2A:1B. Combine parts and mix thoroughly. For the first layer, apply a detail coat to the first half. Measure and mix duoMatrix NEO with chopped fiber. Apply this as the second layer. Apply a third layer of duoMatrix NEO without chopped fiber. A wood support leg is attached using duoMatrix NEO. Let cure for one hour.
Once the NEO has cured, remove the dividing wall. Drill indentations into shell for registration. Build a clay dam and pour spout. Apply Sonite Wax to baseboard and exposed shell and then apply Ease Release 200 to the entire surface. Measure and mix NEO for the second half of the support shell, following the same procedure used to create the first half. Again, a wood support leg is attached using NEO and the shell is allowed to cure one hour at room temperature. A rasp is used to create a smooth flange edge, and then three holes are drilled through the support shell. Bolts will help secure the support shell during casting.
Demold the support shell halves, remove the plastic wrap from the model, and then remove clay from the support shell. Create vent holes in support shell to allow air to escape. A 1/4-inch (6 mm) drill bit is used to drill holes through the support shell for a total of six air vents. Apply release agent to both the model and support shell. Register the support shell over the model and secure. Use bolts to hold the support shell halves together. Drywall screws are used to secure the support shell to the baseboard. Seal all seams with a hot glue gun. Place drinking straws into pre-drilled holes for air release, using clay to help secure and seal the straw. Only 1/4-inch of the straw will go into the support shell. IMPORTANT: Do not allow the drinking straws to touch the model. Trim the top two straws for easier access to the pour spout.
Measure and mix Mold Max 30 silicone rubber. Then vacuum the Mold Max 30. After vacuuming, pour Mold Max 30 into the pour spout. Cap the top of the straws with clay to stop the flow of rubber, saving material. Continue to pour rubber until the cavity is filled. Let Mold Max 30 rubber cure for 16 hours at room temperature. Once cured, remove the support shell and rubber mold from the model. Perfect detail is captured from the original model.
How to cast into the mold:
The mold is first primed with auto body primer. Smooth-Cast 300 liquid plastic is measured, mixed, and poured into the mold. After three minutes, the liquid plastic turns to a solid. Let Smooth-Cast 300 cure for 10 minutes at room temperature. Remove the support shell and demold casting. A perfect reproduction! The casting is ready to be painted.
Make It Now! with Smooth-On