26 Years Factory Siway SV-602 Epoxy Structural Adhesive A/B for Estonia Manufacturers

26 Years Factory Siway SV-602 Epoxy Structural Adhesive A/B for Estonia Manufacturers
  • 26 Years Factory Siway SV-602 Epoxy Structural Adhesive A/B for Estonia Manufacturers26 Years Factory Siway SV-602 Epoxy Structural Adhesive A/B for Estonia Manufacturers

Short Description:

Description SV-602 is a 2-part structural epoxy adhesive developed for such application as dry fixing cladding. It has strong adhesion to metals, woods, reinforced plastics stone, ceramic and masonry. It is the best choice for bonding parts which must withstand weather, moisture and temperature fluctuations. SV-602 will adhere with minimum surface preparation and has a low coefficient of expansion.   Key Features 1. Room temperature curing Epoxy adhesive 2. Fast cure at room temperature,...


Product Detail

Attentions

Application

Product Tags

Our development depends on the advanced equipment ,excellent talents and continuously strengthened technology forces for 26 Years Factory Siway SV-602 Epoxy Structural Adhesive A/B for Estonia Manufacturers, Inspired by the rapid developing market of the fast food and beverage consumables all over the world , We are looking forward to working with partners /clients to make success together .


Description

SV-602 is a 2-part structural epoxy adhesive developed for such application as dry fixing cladding. It has strong adhesion to metals, woods, reinforced plastics stone, ceramic and masonry. It is the best choice for bonding parts which must withstand weather, moisture and temperature fluctuations. SV-602 will adhere with minimum surface preparation and has a low coefficient of expansion.

 

Key Features

1. Room temperature curing Epoxy adhesive

2. Fast cure at room temperature, <40 min for reaching a tack-free status under standard environment (STD: 23℃, 50% humidity)

3. Mix ratio of 1:1 by volume or by weight

4. Good mechanical property

5. Bonds a wide variety of building materials

6. Good waterproofing and chemical resistance

 

Basic Application

1, the external walls of stone material, ceramic and other hang bond;

2, concrete, ceramics, stone, wood and other prefabricated split, bonding and jointing;

3, concrete, stone and so on crack repair;

4, the structure of the localization, anchor, reinforcement and reinforcement.

 

Technical data sheet

The following data is for reference only and is not recommended for the specification

Shear strength Stainless steel-stainless steel/Standard conditions ≥18   JC887-2001
Pressure shear strength Stone-stone/ Standard conditions ≥12
Stone-stone/ The freeze-thaw cycle 50 times ≥10
Stone – stainless steel/ Standard conditions ≥12
Standard conditions:Temperature=23℃,relative humidity=50%,48 hours curing
attribute SV-602-A SV-602-B SV-602(After mixing)
Colour gray white grey
Density(g/cm³) 1.8 1.8 1.8
Viscosity(PaS) 200-400 150-250  
Effective operating time(23℃) N/A N/A 20min
           

 

Certification

JC 887-2001

 

Color

Part A-Grey Paste/Part B-White Paste

 

Package

9kg/9kg per unit and 15kg/15kg per unit

 

Shelf life

12 months

 

Note

If you want the TDS or MSDS or other details, please contact with our sales person.

  • Previous:
  • Next:



  • 1. Silicone rubber for gypsum mold making application:

    RTV silicone can be used for production of different sizes of plaster moulds,stone moulds,resin moulds,polyresin moulds,PU resin moulds,wax moulds,stone moulds ,epoxy moulds,acrylic moulds,polyester moulds making

    A. Decorative items: cornices moulding ,columns moulding,ornaments moulding,statues molding…..

    B. Casting of funiture and decoration crafts molding

    C. Construction: prefabrication of decrative features molding,pavement molding,paving stone moulding,urban

    furniture molding,concrete products molding

    D. Soap moulding,candles crafts moulding,toys moulding,sculpture moulding

    2. Silicone rubber for gypsum mold making of TDS:

    Model
    630#

    Appearance
    white

    Mixing ratio (%)
    5%

    Operating time ( hours )
    30~40

    Curing time( hours )
    3~4

    Hardness (A°)
    30

    Density ( g/cm 3)
    1.08

    Viscosity (25 C°,mPa.s)
    22000~ 24000

    Tensile-strength

    ( kgf/cm2 )
    40

    Tear-strength (kgf/cm )
    25

    Elongation-break(%)
    ≥ 420

    Retractility(%)
    ≤0.25

    3. Silicone rubber for gypsum mold making main features:

    1. Good characteristics of easy-operation

    2. Light viscosity and good flowability

    3. Low shrinkage

    4. Excellent tensile and tear strength

    5. Favorable hardness

    6. High temperature resistance, acid and alkali-resistance and ageing resistance

    7. High duplication times

    4. Silicone rubber for gypsum mold making frequently asked question:

    Why does the silicone molds appeared striately and unsmoothly?

    It is because the appearance of the product or the model itself is not perfect, and it has not been polished before the further operation. So when you make silicon molds, firstly you should polish the product, spray the mold spray evenly on the product. In this case, the problem can be avoided.

    To recommend suitable product for your application, we would be much appreciated to have your following information:

    1. What is the material of your product?

    2. What is the size of your product?

    3. How do you make silicone mold, by pouring or brushing?

    Any questions of Silicone rubber for gypsum mold making, please feel free to

    contact Aaron:

    Homepage: www.szrl.net

    TEL: 086-755-89948006

    FAX: 086-755-89948030

    MOBILE:086-18938867535

    Email:hyjf@szrl.net

    Related Products

    WhatsApp Online Chat !