23 Years Factory SV-618 Acetic Glass Sealant to Uganda Manufacturers

23 Years Factory
 SV-618 Acetic Glass Sealant to Uganda Manufacturers
  • 23 Years Factory
 SV-618 Acetic Glass Sealant to Uganda Manufacturers23 Years Factory
 SV-618 Acetic Glass Sealant to Uganda Manufacturers
  • 23 Years Factory
 SV-618 Acetic Glass Sealant to Uganda Manufacturers23 Years Factory
 SV-618 Acetic Glass Sealant to Uganda Manufacturers

Short Description:

Description It is one-component acetoxy silicone sealant with fungicide to form a durable and flexible rubber seal resistant to water, mildew and mold.   Where to use SV-618  is an excellent candidate to consider the reliable prevention of mildew formation around fixtures in high humidity and temperature areas such as bath and kitchen rooms, swimming pool, facilities and lavatories. It also has good adhesion to most common building materials e.g. glass, tiles, ceramics and fiber glass, painte...


Product Detail

Attentions

Application

Product Tags

With a positive and progressive attitude to customer's interest, our company continuously improves our product quality to meet the needs of customers and further focuses on safety, reliability, environmental requirements, and innovation of
23 Years Factory SV-618 Acetic Glass Sealant to Uganda Manufacturers, We welcome new and old customers from all walks of life to contact us for future business relationships and achieving mutual success!


Description

It is one-component acetoxy silicone sealant with fungicide to form a durable and flexible rubber seal resistant to water, mildew and mold.

 

Where to use

SV-618  is an excellent candidate to consider the reliable prevention of mildew formation around fixtures in high humidity and temperature areas such as bath and kitchen rooms, swimming pool, facilities and lavatories. It also has good adhesion to most common building materials e.g. glass, tiles, ceramics and fiber glass, painted wood.

 

Key Features

1. 100% silicone

2. Easy to apply

3. Highly efficient and safe bactericide

4. Low VOC

5. Proven Performer

 

Technical data sheet

Technical data sheet for reference,

  Test standard 1000
Appearance ISO 11600 Have no grain, no agglomerations
Extrudability,g/ml ISO 8394 450
Tack Free Time,min ASTM C 679 20
Density,g/cm3 ISO 1183 1.0
Slump,mm ISO 7390 0
Heat weight loss,% ISO 10563 7
Ultimate Tensile Strength,MPa ISO 8339 0.4
Ultimate Elongation,% ISO 8339 150
Ultimate Shear Strength, MPa ISO 4587 N/A

 

Certification

JC/T885-2001 20LM; and GB/T1741-2007 Mildew Proofing Grade 0

 

Color

clear, black, silver gray, white

 

Package

300ml in cartridge * 24 per box

 

Shelf life

12 months

 

Note

If you want the TDS or MSDS or other details, please contact with our sales person.

  • Previous:
  • Next:



  • How to Create a Solar Panel Water Heater
    00:00:28 Steps
    00:00:33 1 – Get a double-glazed unit for the sunlight to pass through
    00:00:59 2 – Get a single-panel room radiator that is slightly smaller than the glass unit
    00:01:20 3 – Build a strong wooden box to fit the double-glazed unit
    00:01:59 4 – If the box will sit on a flat surface build a support so that the box can be installed perpendicular to the sun
    00:02:20 5 – Treat the outside of the box to make the wood water resistant
    00:02:31 6 – Glue aluminum kitchen foil to the plywood inside the box
    00:02:42 7 – Screw two radiator brackets inside the box to support the radiator
    00:02:54 8 – Insert a layer of 50mm thermal insulation slabs over the kitchen foil
    00:03:07 9 – Fit the radiator onto the brackets and drill 20mm holes in the side of the box where the pipes will come out
    00:03:31 10 – Plumb in the radiator so that two pieces of 15mm copper tube extends 100mm from the outside of the box
    00:03:55 11 – Spray the front of the radiator matt black using heat resistant paint, such as that used for spraying the radiant parts of coal and gas fires
    00:04:11 12 – Screw two angle brackets onto the bottom edge of the box and bend them up to stop the glass sliding off the box
    00:04:25 13 – Run a bead of silicone sealant around the edge of the box and place lengths of electrical tape over the bead so the glass doesn’t stick to it
    00:04:41 14 – Place the glass on the box and leave the silicon to set
    00:05:00 15 – Screw L section UPVC strips to the three sides where the glass is flush with the box to prevent rain ingress
    00:05:22 16 – Get rubber engine hose with an internal diameter of 15mm from a car parts shop and attach it to the 15mm copper tube with jubilee clips
    00:05:49 17 – Finished

    Content taken from WikiHow https://www.wikihow.com/Create-a-Solar-Panel-Water-Heater



    Case Count: 12
    Bulk Weight: 1.5(oz) / 0.04(kg)
    Requires 1 AA Battery
    4” x 1”/10.25 cm x 2.5 cm
    Velvety soft and flexible Silicone massagers with unique pleasure tips and vibrations throughout
    Discreetly sized
    10 powerful functions of vibration, pulsation and escalation
    Easy push button controls with auto off
    Silicone (massager, buttons) ABS with PU Cote (cap) ABS with Silver Plating (décor)

    For More Information:

    https://www.calexotics.com/p-23914-dr-laura-berman-intimate-basics-collection-roxy-10-function-silicone-o-ring-massager.aspx

    Related Products

    WhatsApp Online Chat !