23 Years Factory SV-312 Polyurethane Sealant for Windshield Glazing Wholesale to Brasilia
Short Description:
Description SV-312 is an isocyanate-free, high modulus,non conductive, thixotropic, single component modified polyurethane adhesive, which polymerizes rapidly under the effect of atmospheric moisture. It has been specially designed for bonding of fixed glass in automotive repair. It allows a drive away time of 6 hours in vehicles with or without airbag. *Providing the ambient temperature is at least 23°C and relative humidity 50 %. At lower temperatures and humidities drive away time will be...
We have many excellent staff members good at marketing, QC, and dealing with kinds of troublesome problem in the production process for 23 Years Factory SV-312 Polyurethane Sealant for Windshield Glazing Wholesale to Brasilia, we are seeking for extensive cooperation with honest customers, achieving a new cause of glory with customers and strategic partners.
Description
SV-312 is an isocyanate-free, high modulus,non conductive, thixotropic, single component modified polyurethane adhesive, which polymerizes rapidly under the effect of atmospheric moisture. It has been specially designed for bonding of fixed glass in automotive repair.
It allows a drive away time of 6 hours in vehicles with or without airbag.
*Providing the ambient temperature is at least 23°C and relative humidity 50 %.
At lower temperatures and humidities drive away time will be longer.
Where to use
Bonding and sealing for windshield glass, glass fiber reinforced plastic fittings, steel and aluminum board of automobiles.
Key Features
a. Fast curing under room temperature, no sagging, solvent free
b. High bonding strength,
c. Good chemical and water resistance
d. No conductive
e. Excellent noise, vibration and impaction resistance
f. Automotive OEM quality
Technical data sheet
Test standard | Test project | Unit | value |
GB13477 | Flow, sagging or vertical flow | mm | 0 |
GB13477 | surface drying time(25℃,50%R.H.) | min | 30 |
Curing speed | mm/24h | 3 | |
GB/T 531.1-2008 | Durometer Hardness | Shore A | 45 |
GB/T 2793 | Non-volatile components | % | ≥96 |
GB/T 528 | The tensile strength | Mpa | 2.5Mpa |
GB/T 528 | Elongation at break | % | ≥400% |
GB/T 528 | Tear strength | N/mm | ≥5.0 |
Color
White, black, grey
Package
300ml plastic cartridges and 600ml in sausage
Shelf life
9 months
Note
If you want the TDS or MSDS or other details, please contact with our sales person.
https://www.michaelbronco.wordpress.com Glazing is easy when you know how. This is a simple technique that works every time.
Inspired from Anbu masks. I didn’t have really good clay or a base for it so, I used tin foil and just use newspapers to make a mask. This is just my own way of making a Anbu sort of mask.
Hope ya like it. Chow-
If you don’t have a clay, why don’t you try using papers?
A homemade mask made entirely out of paper using aluminium foil as the base.
Instructions:
1. Start by scrunching about 8-10 pieces of aluminium foils
2. Put it on your face to shape it into your face
3. Mark a line up to the edge of your forehead and cut it
4. Mark your nose on the foil and cut 2 cm down from it
5. Mark where your eyes are to make a hole
6. Cut two slits and make a flap for the nose
7. Cut slits to make a curve for the forehead and tape it
8. Make slits up to the line and fold to tape it so it has the shape of your jaw
9. Cut the excess so it perfectly fits your jaw
10. There you have your two pieces
11. Tape them together and stick some tape on the eyes
12. Whisk water and flour until it is a thick paste
13. Tear or Cut strips of newspaper
14. Dip the paper and apply about 2 layers to the base
15. Then let it dry or use hairdryer
16. Apply another layer but more layers on the mouth to make it curve
17. For the ears fold the foil into half then into triangle
18. Tape the pieces above the eye level
19. Apply some layer on the mask including the ears and let it dry
20. Cut strips of towel paper
21. Apply two vertical layers of towel paper
23. Let it dry
24. Apply one horizontal layer of towel paper and let it dry
25. Apply white acrylic on the mask
26. Leave it to dry
27. Draw the design on the mask
28. Apply the colours according to your design
*You can put PVA glue after the colour has dried*
* You can put a strap using a glue gun*
————
Tips
+ Acrylic paint is best to use in my opinion.
+ You can use poster colour and after it dries evenly cover it with PVA to preserve and make it shiny.
+ You can take the foil out from the mask…but kinda tricky. But I just covered the foil with the white tape on underside.
+ Let the newspaper you stuck well, cuz if it’s not properly dry, it started to stink. You DONT want to wear a stinky mask.
+ Just put some tape underside cuz the foil can cut your face.