22 Years Factory Siway SV-602 Epoxy Structural Adhesive A/B Supply to Istanbul

22 Years Factory Siway SV-602 Epoxy Structural Adhesive A/B Supply to Istanbul
  • 22 Years Factory Siway SV-602 Epoxy Structural Adhesive A/B Supply to Istanbul22 Years Factory Siway SV-602 Epoxy Structural Adhesive A/B Supply to Istanbul

Short Description:

Description SV-602 is a 2-part structural epoxy adhesive developed for such application as dry fixing cladding. It has strong adhesion to metals, woods, reinforced plastics stone, ceramic and masonry. It is the best choice for bonding parts which must withstand weather, moisture and temperature fluctuations. SV-602 will adhere with minimum surface preparation and has a low coefficient of expansion.   Key Features 1. Room temperature curing Epoxy adhesive 2. Fast cure at room temperature,...


Product Detail

Attentions

Application

Product Tags

With our rich experience and considerate services, we have been recognized as a reliable supplier for many international buyers for 22 Years Factory Siway SV-602 Epoxy Structural Adhesive A/B Supply to Istanbul, We are also constantly looking to establish relationship with new suppliers to provide innovative and smart solution to our valued customers.


Description

SV-602 is a 2-part structural epoxy adhesive developed for such application as dry fixing cladding. It has strong adhesion to metals, woods, reinforced plastics stone, ceramic and masonry. It is the best choice for bonding parts which must withstand weather, moisture and temperature fluctuations. SV-602 will adhere with minimum surface preparation and has a low coefficient of expansion.

 

Key Features

1. Room temperature curing Epoxy adhesive

2. Fast cure at room temperature, <40 min for reaching a tack-free status under standard environment (STD: 23℃, 50% humidity)

3. Mix ratio of 1:1 by volume or by weight

4. Good mechanical property

5. Bonds a wide variety of building materials

6. Good waterproofing and chemical resistance

 

Basic Application

1, the external walls of stone material, ceramic and other hang bond;

2, concrete, ceramics, stone, wood and other prefabricated split, bonding and jointing;

3, concrete, stone and so on crack repair;

4, the structure of the localization, anchor, reinforcement and reinforcement.

 

Technical data sheet

The following data is for reference only and is not recommended for the specification

Shear strength Stainless steel-stainless steel/Standard conditions ≥18   JC887-2001
Pressure shear strength Stone-stone/ Standard conditions ≥12
Stone-stone/ The freeze-thaw cycle 50 times ≥10
Stone – stainless steel/ Standard conditions ≥12
Standard conditions:Temperature=23℃,relative humidity=50%,48 hours curing
attribute SV-602-A SV-602-B SV-602(After mixing)
Colour gray white grey
Density(g/cm³) 1.8 1.8 1.8
Viscosity(PaS) 200-400 150-250  
Effective operating time(23℃) N/A N/A 20min
           

 

Certification

JC 887-2001

 

Color

Part A-Grey Paste/Part B-White Paste

 

Package

9kg/9kg per unit and 15kg/15kg per unit

 

Shelf life

12 months

 

Note

If you want the TDS or MSDS or other details, please contact with our sales person.

  • Previous:
  • Next:



  • How to unclog Paint Spray Cans – both types.
    Well first, if you shake the spray paint can thoroughly for at least 5 minutes, you likely will have no problem with the paint clogging the spray can. But if you do have a clog in the paint spray can, I found the fastest and simplest way to unclog the spray paint can is to use compressed air. Most cans are filled to 90 psi to 105 psi at 70 to 75 degrees Fahrenheit when new. So I use about 100 psi to unclog the feed tube inside the can. I’ll use an old tire valve and push it on the top of the paint can tight and use compressed air at no more than 100 psi and that will push the clog back inside the spray can. Then shake the can up very well to break up any clumped paint inside the can and you should be good to go.



    Breast forms graciously supplied by The Breast Form Store (not sponsored): https://thebreastformstore.com/divine-collection-aphrodite-breastforms.aspx Breast forms are reusable, adhesive silicone breast prosthetics that mimic the look and feel of natural breasts. They adhere to the body and can be worn all day long. Men tried them out for the first time in this experiment.

    Related Products

    WhatsApp Online Chat !