18 Years Factory offer SV-311 Polyurethane Sealant for Construction for Puerto Rico Manufacturers

Always customer-oriented, and it's our ultimate target to be not only the most reliable, trustable and honest supplier, but also the partner for our customers for 18 Years Factory offer SV-311 Polyurethane Sealant for Construction for Puerto Rico Manufacturers, We hope to establish more business relationships with customers all over the world.

Description

SV-311  is a one component polyurethane high modulus flexible sealant formulated as reliable bonding adhesive and joint sealant for construction industry, particularly where a higher modulus and lower movement capacity are required for joints with low or medium movement, e.g. connection joints between floor/stairs and wall, connection joints between floor and machinery, seam sealing / sealing of pipe ducts / ventilation systems, multipurpose joints in metal and wood construction work.

Key Features

1. Non-sag consistency 

2. Excellent adhesion to most common building materials

3. High tear strength 

4. High tensile strength

5. Less fluid migration to porous material

Technical data sheet

Color

White, black, grey

Package

300ml plastic cartridges and 600ml in sausage

Shelf life

9 months 

Note

If you want the TDS or MSDS or other details, please contact with our sales person.

Miracle Sealants 511 Seal & Enhance Is a unique, solvent-base formula designed to eliminate the need to use an impregnator before using a color enhancer for maximum stain protection and superior color enhancement. 511 Seal & Enhance is safe for use on granite, marble, limestone, natural stone, slate, ceramic tile, quarry tile, grout, concrete and masonry surfaces. 511 Seal & Enhance will enhance the color and rejuvenate the appearance of tumbled, honed, acid-washed, sandblasted, flamed, textured, even polished stone and tile surfaces. In addition, 511 Seal & Enhance revitalizes old and worn stone and tile installations. It can be used successfully in both interior and exterior environments and is freeze/thaw resistant.

Level floors prior to the installation of tile or other flooring requiring a flat surface. Rapid setting LevelQuik Self-Leveling Underlayment can be poured up to 1 1/2″ deep and seeks its own level in minutes. LevelQuik RS helps prevent bond failure, crumbling and staining.

The first step to a successful tile or other floor covering installation is a flat subfloor.
By using LevelQuik RS, from Custom Building Products, you will help to eliminate:

- Lippage or unevenness between tiles and cracks in tile or grout
This is especially important if you are installing large format tile, which is any tile with a side 15 inches or longer.

Rapid-setting LevelQuik cures fast, so it’s ready for tiling in only 4 hours.

Before getting started, review the Technical Data sheet for more detailed instructions. It includes a list of suitable substrates and coverage charts to help you determine the amount of product needed for your project.
Assemble the following materials, depending on your job conditions:
- A 6 gallon or larger pail
- Heavy duty Electric drill
- Egg beater style mixing paddle
- Metal lath with long and screws
- Foam or weather stripping
- Gauge rake
- Smoothing tool, such as a spreader or the flat side of a trowel
- Water
- Large measuring cup
- LevelQuik Primer
- Stiff push broom or paint roller
LevelQuik can be poured over a variety of substrates, including concrete slabs and exterior grade plywood.
Make sure the surface is clean, dry and freshly swept or vacuumed to remove dust.

Before leveling, all substrates must be prepared with an application of LevelQuik Latex Primer.

Wooden subfloors require attaching a reinforcing layer of metal lath after priming.
Make sure all perimeters, penetrations and movement joints are blocked.

Once the LevelQuik primer has dried, typically 1-3 hours, you’re ready to begin mixing and applying LevelQuik RS.

LevelQuik RS is a rapid setting product, designed to reduce your project installation time.
Put 5 ¼ – 5 ¾ quarts of clean, cool water in a large bucket or other mixing container.
Slowly add the entire bag of LevelQuik while mixing.
We recommend using a heavy duty ½-inch electric drill and an eggbeater mixing paddle with a minimum speed of 650 RPM.
Mix for 2 minutes, without moving the paddle up and down.
Pour the contents onto the subfloor immediately after mixing.
Work from the back wall towards the front of the room so you do not step in leveler that has already begun curing.
Additional buckets should be poured adjacent to previous pours so they merge into each other.
Keep a wet edge at all times until you complete the placement of leveler.

Using a gauge rake, be sure to spread LevelQuik all the way to the dams at the walls or edges of the room.
Follow up with a smoothing tool or the flat side of a trowel.
LevelQuik can be applied from a feather edge up to 1 ½ inches deep.
Once it’s dry, you’re ready to begin tiling.
Don’t forget to fill movement joints and changes of plane with a flexible caulk or sealant, when you are grouting your tile project.
And, when you use an eligible system of qualifying CUSTOM mortars and grouts, the entire tile installation can qualify for up to a lifetime warranty.
Choose LevelQuik RS – from Custom Building Products.